EN ISO 15875-3:2003
(Main)Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
ISO 15875-3:2003 specifies the characteristics of fittings for crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application.
It covers a range of service conditions (application classes) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15875-1.
It also specifies the parameters for the test methods referred to in this standard.
In conjunction with the other parts of ISO 15875, it is applicable to fittings made from PE-X and to fittings, made from other materials, intended to be fitted to pipes conforming to ISO 15875-2 to give joints conforming to the requirements of ISO 15875-5.
It is applicable to fittings of the following types:
mechanical fittingselectrofusion fittingsfittings with incorporated inserts.
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes Polyethylen (PE-X) - Teil 3: Formstücke (ISO 15875-3:2003)
Dieser Teil der EN (155wi023) legt die Anforderungen an Formstücke aus vernetztem Polyethylen (PE-X), aus anderen geeigneten Kunststoffen oder aus anderen Werkstoffen für die Verlegung von Warm- und Kaltwasserleitungen innerhalb und im Umfeld von Gebäuden (Hausinstallations- und Heizungssyteme) fest, für den Transport von Wasser, welches entweder für den menschlichen Gebrauch bestimmt ist oder nicht, unter Betriebsdrücken und Temperaturen entsprechend der Anwendungsklasse.
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 3: Raccords (ISO 15875-3:2003)
L'ISO 15875-3:2003 spécifie les caractéristiques des raccords pour les systèmes de canalisations en polyéthylène réticulé (PE-X) destinés aux installations d'eau chaude et froide à l'intérieur des bâtiments ainsi qu'au transport de l'eau, destinée ou non à la consommation humaine (systèmes domestiques) et aux installations de chauffage, à des pressions et des températures de service correspondant à la classe d'application.
Elle couvre une gamme de conditions (classes d'application) et de classes de pression de service. Elle ne s'applique pas lorsque les valeurs de température de service, de température maximale de service et de température de dysfonctionnement dépassent celles données dans l'ISO 15875-1.
Elle spécifie aussi les paramètres d'essai pour les méthodes d'essai auxquelles il est fait référence dans ce document.
Conjointement avec les autres parties de l'ISO 15875, elle s'applique aux raccords en PE-X, ainsi qu'aux raccords faits en d'autres matériaux destinés à être assemblés à des tubes conformes à l'ISO 15875-2 pour des installations d'eau chaude et froide et où les assemblages sont conformes à l'ISO 15875-5.
Elle s'applique aux raccords répondant aux types suivants:
-- raccords mécaniques;
-- raccords électrosoudables;
-- raccords avec inserts incorporés.
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
General Information
- Status
- Withdrawn
- Publication Date
- 30-Nov-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155/WG 16 - Systems for hot and cold water applications
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Oct-2025
- Completion Date
- 28-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 15-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN ISO 15875-3:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)". This standard covers: ISO 15875-3:2003 specifies the characteristics of fittings for crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application. It covers a range of service conditions (application classes) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15875-1. It also specifies the parameters for the test methods referred to in this standard. In conjunction with the other parts of ISO 15875, it is applicable to fittings made from PE-X and to fittings, made from other materials, intended to be fitted to pipes conforming to ISO 15875-2 to give joints conforming to the requirements of ISO 15875-5. It is applicable to fittings of the following types: mechanical fittingselectrofusion fittingsfittings with incorporated inserts.
ISO 15875-3:2003 specifies the characteristics of fittings for crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application. It covers a range of service conditions (application classes) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15875-1. It also specifies the parameters for the test methods referred to in this standard. In conjunction with the other parts of ISO 15875, it is applicable to fittings made from PE-X and to fittings, made from other materials, intended to be fitted to pipes conforming to ISO 15875-2 to give joints conforming to the requirements of ISO 15875-5. It is applicable to fittings of the following types: mechanical fittingselectrofusion fittingsfittings with incorporated inserts.
EN ISO 15875-3:2003 is classified under the following ICS (International Classification for Standards) categories: 23.040.45 - Plastics fittings; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15875-3:2003 has the following relationships with other standards: It is inter standard links to EN ISO 15875-3:2025, EN 3475-513:2020, EN 10226-1:2004, EN ISO 3126:2005, EN ISO 7686:2005, EN ISO 10147:2012, EN 14772:2021, EN 10088-1:2023, EN ISO 15875-2:2003, EN 12631:1999, EN ISO 9080:2012, EN 681-1:1996, EN 12107:1997, EN ISO 15721:2001, EN ISO 15875-5:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15875-3:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 15875-3:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...