EN 12107:1997
(Main)Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
This standard specifies methods for preparing tubular test pieces for testing thermoplastics materials used for injection moulding to evaluate the long-term resistance to constant internal water pressure at constant temperature and to check the material hydrostatic strength.
Kunststoff-Rohrleitungssysteme - Spritzgegossene thermoplastische Formstücke, Armaturen und Zubehörteile - Bestimmung des Zeitstand-Innendruckverhaltens von thermoplastischen Werkstoffen für das Spritzgießen von Rohrleitungsteilen
Diese Norm legt Verfahren für die Vorbereitung rohrförmiger Probekörper zur Prüfung thermoplastischer Werkstoffe fest, die im Spritzgießverfahren eingesetzt werden. Die Prüfung dient der Beurteilung des Zeitstand- Innendruckverhaltens bei konstanter Temperatur und der Überprüfung der Werkstoff-Festigkeit.
Systèmes de canalisation en plastique - Raccords, robinets et équipements auxiliaires en thermoplastiques moulés par injection - Détermination de la résistance hydrostatique à long terme des matières thermoplastiques utilisées pour le moulage par injection des composants de canalisation
La présente norme spécifie des méthodes de préparation des éprouvettes tubulaires pour l'essai des matières thermoplastiques destinées au moulage par injection. L'essai sert à évaluer leur résistance à long terme à une pression d'eau interne constante, à température constante et à contrôler la résistance hydrostatique de la matière.
Cevni sistemi iz polimernih materialov - Fitingi, ventili in pribor, oblikovani z injekcijskim vbrizgavanjem - Določanje dolgotrajne hidrostatične trdnosti plastomernih materialov za cevne elemente, ki so oblikovani z injekcijskim vbrizgavanjem
General Information
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 18-May-2008
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 19-May-2008
- Completion Date
- 19-May-2008
- Directive
- 89/106/EEC - Construction products
Frequently Asked Questions
EN 12107:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components". This standard covers: This standard specifies methods for preparing tubular test pieces for testing thermoplastics materials used for injection moulding to evaluate the long-term resistance to constant internal water pressure at constant temperature and to check the material hydrostatic strength.
This standard specifies methods for preparing tubular test pieces for testing thermoplastics materials used for injection moulding to evaluate the long-term resistance to constant internal water pressure at constant temperature and to check the material hydrostatic strength.
EN 12107:1997 is classified under the following ICS (International Classification for Standards) categories: 83.140.30 - Plastics pipes and fittings for non fluid use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12107:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12107:1997 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WUGQRVWLHNFLMVNLPYEUL]JDYDQMHPKunststoff-Rohrleitungssysteme - Spritzgegossene thermoplastische Formstücke, Armaturen und Zubehörteile - Bestimmung des Zeitstand-Innendruckverhaltens von thermoplastischen Werkstoffen für das Spritzgießen von RohrleitungsteilenSystemes de canalisation en plastique - Raccords, robinets et équipements auxiliaires en thermoplastiques moulés par injection - Détermination de la résistance hydrostatique a long terme des matieres thermoplastiques utilisées pour le moulage par injection des composants de cana
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...