EN 10246-6:1999
(Main)Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave testing of seamless steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the Parts shown in Annex A.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 6: Automatische Ultraschallprüfung nahtloser Stahlrohre über den gesamten Rohrumfang zum Nachweis von Querfehlern
Dieser Teil der EN 10246 legt die Anforderungen an die automatische Ultraschallprüfung mit Winkeleinschallung nahtloser Rohre zum Nachweis von Querfehlern fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen. Dieser Teil der EN 10246 ist anwendbar für die Prüfung von Rohren mit einem Außendurchmesser ab 10 mm. Die Europäische Norm EN 10246 "Zerstörungsfreie Prüfung von Stahlrohren" besteht aus den in Anhang A angeg ebenen Teilen.
Essais non destructifs des tubes en acier - Partie 6: contrôle automatique par ultrasons sur toute la circonférence des tubes pour la détection des imperfections transversales des tubes en acier sans soudure
La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle automatique par ultrasons, avec ondes de cisaillement, sur toute la surface des tubes sans soudure pour la détection d'imperfections transversales. La norme spécifie des niveaux de sévérité et des procédures d'étalonnage. Elle s'applique au contrôle de tubes dont le diamètre extérieur est égal ou supérieur à 10 mm. Les parties de la norme européenne EN 10246 "Essais non destructifs des tubes en acier" sont données en annexe A.
Neporušitveno preskušanje jeklenih cevi - 6. del: Ugotavljanje prečnih napak po celotnem obodu nevarjenih jeklenih cevi z avtomatsko ultrazvočno preiskavo
General Information
- Status
- Withdrawn
- Publication Date
- 16-Nov-1999
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 09-Apr-2011
Frequently Asked Questions
EN 10246-6:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections". This standard covers: This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave testing of seamless steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the Parts shown in Annex A.
This Part of EN 10246 specifies the requirements for automatic ultrasonic shear wave testing of seamless steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels and calibration procedures. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the Parts shown in Annex A.
EN 10246-6:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-6:1999 has the following relationships with other standards: It is inter standard links to EN ISO 10893-10:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-6:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-6:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHLVNDYRZerstörungsfreie Prüfung von Stahlrohren - Teil 6: Automatische Ultraschallprüfung nahtloser Stahlrohre über den gesamten Rohrumfang zum Nachweis von QuerfehlernEssais non destructifs des tubes en acier - Partie 6: contrôle automatique par ultrasons sur toute la circonférence des tubes pour la détection des imperfections transversales des tubes en acier sans soudureNon-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...