EN 14995:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastics - Evaluation of compostability - Test scheme and specificationsPolimerni materiali - Vrednotenje primernosti za kompostiranje - Preskusna shema in specifikacijeMatieres plastiques - Evaluation de la compostabilité - Programme d'essais et spécificationsKunststoffe - Bewertung der Kompostierbarkeit - Prüfschema und SpezifikationenTa slovenski standard je istoveten z:EN 14995:2006SIST EN 14995:2007en;fr;de83.080.01Polimerni materiali na splošnoPlastics in general13.030.99Drugi standardi v zvezi z odpadkiOther standards related to wastesICS:SLOVENSKI
STANDARDSIST EN 14995:200701-april-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14995December 2006ICS 13.030.99; 83.080.01 English VersionPlastics - Evaluation of compostability - Test scheme andspecificationsMatières plastiques - Evaluation de la compostabilité -Programme d'essais et spécificationsKunststoffe - Bewertung der Kompostierbarkeit -Prüfschema und SpezifikationenThis European Standard was approved by CEN on 9 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14995:2006: E

Evaluation criteria.11 Annex B (informative)
Flow chart of evaluation of organic recoverability of plastic materials.13 Annex C (informative)
Prerequisites and quality of compost for evaluating composting of plastic materials.17 Annex D (normative)
Determination of ecotoxic effects to higher plants.18 Bibliography.20

biodegradability, II)
disintegration during biological treatment, III)
effect on the biological treatment process and IV)
effect on the quality of the resulting compost. NOTE For packaging EN 13432 applies. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 14851, Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer (ISO 14851:1999)
EN ISO 14852, Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide (ISO 14852:1999) EN ISO 14855, Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide (ISO 14855:1999) ISO 16929, Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test OECD Guidelines for Testing of Chemicals 208: Terrestrial Plants, Growth Test; Organisation for Economic Co-operation and Development, 2 rue André Pascal, F - 75775 Paris

Control of constituents Constituents known to be, or expected to become, harmful to the environment during the biological treatment process (see Clause 8), in excess of the limits given in A.1, shall not be deliberately introduced into plastic materials intended to be designated as suitable for organic recovery. 4.2
Assessment 4.2.1 General Except as identified in 4.3, assessment of the biological treatability of plastic materials shall include the following 5 assessment procedures as a minimum:  characterization (4.2.2);  biodegradability (4.2.3);  disintegration including effects on the biological treatment process (4.2.4);  compost quality (4.2.5);  recognizability (4.2.6).
...