iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12173:1998

(Main)

Chemicals used for treatment of water intended for human consumption - Sodium fluoride

Chemicals used for treatment of water intended for human consumption - Sodium fluoride

This European Standard is applicable to sodium fluoride used for treatment of water intended for human consumption. It describes the characteristics of sodium fluoride and specifies the requirements and the corresponding test methods of sodium fluoride. It gives information and its use in water treatment.

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Natriumfluorid

Diese Europäische Norm gilt für Natriumfluorid zur Aufbereitung von Wasser für den menschlichen Gebrauch. Sie beschreibt die Eigenschaften von Natriumfluorid und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Natriumfluorid fest. Sie gibt Informationen für seine Anwendung in der Wasseraufbereitung.

Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Fluorure de sodium

La présente norme européenne est applicable au fluorure de sodium utilisé pour le traitement de l'eau destinée à la consommation humaine. Elle décrit les caractéristiques du fluorure de sodium et spécifie les prescriptions et les méthodes d'essai correspondant au fluorure de sodium. Elle donne des informations pour son emploi dans le traitement de l'eau.

Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev fluorid

General Information

Status
Withdrawn
Publication Date
22-Sep-1998
Withdrawal Date
21-Jun-2005
ICS
71.060.50 - Salts
71.100.80 - Chemicals for purification of water
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164/WG 9 - Drinking water treatment
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
22-Jun-2005
Completion Date
22-Jun-2005
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 12173:2000 - Chemicals used for treatment of water intended for human consumption - Sodium fluoride

Relations

Replaced By
EN 12173:2005 - Chemicals used for treatment of water intended for human consumption - Sodium fluoride
Effective Date
22-Dec-2008

Buy Standard

EN 12173:2000EN 12173:2000
PreviousNext
Standard
EN 12173:2000
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev fluoridProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - NatriumfluoridProduits chimiques utilisés pour le traitement de l'eau destinée a la consommation humaine - Fluorure de sodiumChemicals used for treatment of water intended for human consumption - Sodium fluoride71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinkin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16062:2023(Main)
Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks
kSIST FprEN 16062:2022

In respect of pan-European eCall (operating requirements defined in EN 16072), this document defines the high-level application protocols, procedures and processes required to provide the eCall service using a TS12 emergency call over a circuit-switched mobile communications network.
NOTE 1   The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using a PLMN (such as ETSI prime medium) which supports the European harmonized 112/E112 emergency number (TS12 ETSI TS 122 003) and to provide a means of manually triggering the notification of an emergency incident.
NOTE 2   HLAP requirements for third-party services supporting eCall can be found in EN 16102, and have been developed in conjunction with the development of this work item, and is consistent in respect of the interface to the PSAP. This deliverable makes reference to those provisions but does not duplicate them.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17573-3:2023(Main)
Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary (ISO 17573-3:2023)
kSIST FprEN ISO 17573-3:2023

This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of semantics are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
—     ASN.1 (data) types within the fields of EFC;
—     ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the financial sector, etc.

  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17943:2023(Main)
Characterization of waste - Guidance on the determination of the content of elements and substances in waste
kSIST-TS FprCEN/TS 17943:2023

This document provides guidance to the characterization of waste. It applies to all types of waste, with unknown or partially known composition, by giving examples of EN standards dedicated to waste characterization and analytical methods for parameters not covered by standards. Some requirements concerning the determination of inorganic elements and organic substances content in waste are given to achieve approximately 90 % or the highest possible mass.
In case information on the origin or on the composition of the waste is given by the owner of the waste, it might be sufficient to follow only part of this document to complete missing knowledge about the waste.

  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day