EN 1806:2000
(Main)Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
This document is a product standard for clay/ceramic flue blocks with solid walls or walls with vertical perforations. Blocks may be either bonded or not bonded into a wall. When they are installed, they will form a single-wall chimney which will serve to convey products of combustion from fireplaces or heating appliances to the atmosphere. This standard includes components used for domestic and industrial chimneys which are not structurally independent (freestanding). This standard specifies the performance requirements for factory-made flue blocks.
Abgasanlagen - Keramik-Formblöcke für einschalige Abgasanlagen - Anforderungen und Prüfmethoden
Diese Europäische Norm legt die Anforderungen für Keramik-Formblöcke mit massiven oder vertikal gelochten Wandungen einschließlich eingebundener oder nicht eingebundener Formblöcke und deren Formstücke fest. Nicht eingebundene Formblöcke mit einer Dämmung in der vertikal gelochten Wandung oder an den Außenwänden werden ebenfalls in dieser Norm berücksichtigt. Diese Norm legt die Leistungsanforderungen für werkmäßig hergestellte Formblöcke fest.
Conduits de fumée - Boisseaux en terre cuite/céramique pour conduits de fumée simple paroi - Exigences et méthodes d'essai
La présente norme européenne spécifie les exigences concernant les boisseaux en terre cuite/céramique munis de parois pleines ou de parois à alvéoles verticales, y compris les boisseaux harpés ou non et leurs accessoires. Les boisseaux non liants qui présentent une isolation dans les alvéoles verticales ou fixée sur les parois extérieures sont également couverts par la présente norme. La présente norme spécifie les prescriptions de performance des boisseaux fabriqués en usine.
Dimniki - Keramične tuljave za enoslojne dimnike - Zahteve in preskusne metode
General Information
- Status
- Withdrawn
- Publication Date
- 18-Apr-2000
- Withdrawal Date
- 25-Jul-2006
- Technical Committee
- CEN/TC 166 - Chimneys
- Drafting Committee
- CEN/TC 166/WG 3 - Clay/Ceramic chimneys
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Jul-2006
- Completion Date
- 26-Jul-2006
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Referred By
EN 60122-1:2002/A1:2018 - Quartz crystal units of assessed quality - Part 1: Generic specification - Effective Date
- 09-Feb-2026
- Referred By
EN 60122-1:2002 - Quartz crystal units of assessed quality - Part 1: Generic specification - Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 1806:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods". This standard covers: This document is a product standard for clay/ceramic flue blocks with solid walls or walls with vertical perforations. Blocks may be either bonded or not bonded into a wall. When they are installed, they will form a single-wall chimney which will serve to convey products of combustion from fireplaces or heating appliances to the atmosphere. This standard includes components used for domestic and industrial chimneys which are not structurally independent (freestanding). This standard specifies the performance requirements for factory-made flue blocks.
This document is a product standard for clay/ceramic flue blocks with solid walls or walls with vertical perforations. Blocks may be either bonded or not bonded into a wall. When they are installed, they will form a single-wall chimney which will serve to convey products of combustion from fireplaces or heating appliances to the atmosphere. This standard includes components used for domestic and industrial chimneys which are not structurally independent (freestanding). This standard specifies the performance requirements for factory-made flue blocks.
EN 1806:2000 is classified under the following ICS (International Classification for Standards) categories: 91.060.40 - Chimneys, shafts, ducts; 91.100.25 - Terracotta building products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1806:2000 has the following relationships with other standards: It is inter standard links to EN 1806:2006, EN 60122-1:2002/A1:2018, EN 60122-1:2002, EN 12770:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1806:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/105. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1806:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abgasanlagen - Keramik-Formblöcke für einschalige Abgasanlagen - Anforderungen und PrüfmethodenConduits de fumée - Boisseaux en terre cuite/céramique pour conduits de fumée simple paroi - Exigences et méthodes d'essaiChimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods91.100.25Ceramic building products91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:EN 1806:2000SIST EN 1806:2001en01-februar-2001SIST EN 1806:2001SLOVENSKI
STANDARD
SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...