EN 10246-7:1996
(Main)Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
This Part of EN 10246 specifies the requirements for automatic full peripheral ultrasonic shear wave testing of sean-dess and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for the detection of longitudinal imperfections according to six different acceptance levels (see table I and associated notes).
Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Automatische Ultraschallprüfung nahtloser und geschweißter (ausgenommen Unter-Pulver-geschweißter) Stahlrohre über den gesamten Rohrumfang zum Nachweis von Längsfehlern
Dieser Teil der EN 10246 legt die Anforderungen an die automatische Ultraschall-Transversalwellen-Prüfung über den gesamten Umfang nahtloser und geschweißter Stahlrohre - mit Ausnahme unterpulvergeschweißter (SAW-) Rohre - zum Nachweis von Längsfehlern nach sechs unterschiedlichen Zulässigkeitsklassen fest (siehe Tabelle 1 mit Anmerkungen).
Essais non-destructifs des tubes en acier - Partie 7: Contrôle automatique par ultrasons sur toute la circonférence pour la détection des imperfections longitudinales des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre)
La présente partie de norme européenne EN 10246 spécifie des prescriptions pour le contrôle automatique par ultrasons, avec ondes de cisaillement, sur la totalité de la surface extérieure de tubes soudés et sans soudure à l'exception des tubes soudés à l'arc immergé (SAW), pour détection des imperfections longitudinales, suivant six niveaux de sévérité différents (voir tableau 1 et notes afférentes).
Neporušitvene preiskave jeklenih cevi - 7. del: Avtomatično odkrivanje vzdolžnih napak na obodu nevarjenih in varjenih (razen obločno varjenih pod praškom) jeklenih cevi z ultrazvokom
General Information
- Status
- Withdrawn
- Publication Date
- 19-Mar-1996
- Withdrawal Date
- 04-Oct-2005
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Oct-2005
- Completion Date
- 05-Oct-2005
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 10246-7:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections". This standard covers: This Part of EN 10246 specifies the requirements for automatic full peripheral ultrasonic shear wave testing of sean-dess and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for the detection of longitudinal imperfections according to six different acceptance levels (see table I and associated notes).
This Part of EN 10246 specifies the requirements for automatic full peripheral ultrasonic shear wave testing of sean-dess and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for the detection of longitudinal imperfections according to six different acceptance levels (see table I and associated notes).
EN 10246-7:1996 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-7:1996 has the following relationships with other standards: It is inter standard links to EN 10246-7:2005, EN 62153-4-7:2016, EN IEC 62153-4-15:2021, EN IEC 62153-4-7:2021, EN IEC 62153-4-5:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-7:1996 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-7:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Automatische Ultraschallprüfung nahtloser und geschweißter (ausgenommen Unter-Pulver-geschweißter) Stahlrohre über den gesamten Rohrumfang zum Nachweis von LängsfehlernEssais non-destructifs des tubes en acier - Partie 7: Contrôle automatique par ultrasons sur toute la circonférence pour la détection des imperfections longitudinales des tubes en acier sans soudure et soudés (sauf a l'arc immergé sous flux en poudre)Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (exce
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...