EN 1559-5:1997
(Main)Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
This part of EN 1559 applies to castings made from magnesium alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for magnesium alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.
Gießereiwesen - Technische Lieferbedingungen - Teil 5: Zusätzliche Anforderungen an Gußstücke aus Magnesiumlegierungen
Dieser Teil von EN 1559 gilt für Gußstücke aus Magnesiumlegierungen, die nach dem Sand-, Kokillen-, Druck-, Schleuder-, Strang- oder Feingießverfahren hergestellt werden. Diese Norm legt die zusätzlichen technischen Lieferbedingungen für Magnesiumgußstücke fest. Diese Norm gilt nicht für Blockmetalle, Stangen, Barren (oder andere Formen) für die Weiterverarbeitung, z.B. Wiedereinschmelzen, Schleifen oder Extrudieren.
Fonderie - Conditions techniques de fourniture - Partie 5: Spécifications complémentaires pour les pièces moulées en alliage de magnésium
La présente partie de l'EN 1559 s'applique aux pièces moulées en alliage de magnésium produites par des méthodes de moulage au sable, en coquille, sous pression, centrifuge, continu ou à modèle perdu. La présente norme européenne spécifie les conditions techniques supplémentaires pour la fourniture de pièces moulées en alliage de magnésium. La présente norme ne s'applique pas aux lingots, barres et billettes (ou autres formes) pour des opérations de refonte, de moulage ou d'extrusion.
Livarstvo - Tehnični dobavni pogoji - 5. del: Dodatne zahteve za ulitke iz magnezijevih zlitin
General Information
- Status
- Withdrawn
- Publication Date
- 21-Oct-1997
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 190 - Foundry technology
- Drafting Committee
- CEN/TC 190/WG 9 - Cast magnesium
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Mar-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 08-Mar-2017
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 1559-5:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings". This standard covers: This part of EN 1559 applies to castings made from magnesium alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for magnesium alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.
This part of EN 1559 applies to castings made from magnesium alloys produced by sand casting, permanent mould casting, pressure die casting, centrifugal casting, continuous casting or investment casting. This standard specifies the additional technical delivery conditions for magnesium alloy castings. This standard does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as remelting, grinding or extrusion.
EN 1559-5:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.20 - Magnesium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1559-5:1997 has the following relationships with other standards: It is inter standard links to EN 1559-5:2017, EN 1559-1:2011, EN 1754:2015, EN 1371-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1559-5:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Technische Lieferbedingungen - Teil 5: Zusätzliche Anforderungen an Gußstücke aus MagnesiumlegierungenFonderie - Conditions techniques de fourniture - Partie 5: Spécifications complémentaires pour les pieces moulées en alliage de magnésiumFounding - Technical conditions of delivery - Par
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...