EN ISO 1307:2008
(Main)Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
ISO 1307:2006 specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut lengths of rubber and plastics hose for industrial and automotive applications. This standard is intended to be used with the relevant hose product standard unless there is justification for using a different hose size or unless a hose size needs a different inside-diameter range for a particular application.
Gummi- und Kunststoffschläuche - Schlauchmaße, Kleinst- und Größt-Innendurchmesser, und Toleranzen bei abgelängten Schläuchen (ISO 1307:2006)
Diese Internationale Norm legt die Maße von Gummi- und Kunststoffschläuchen und die zulässigen Kleinst- und Größtinnendurchmesser für jedes Schlauchmaß fest. Für diesen Zweck, werden Schläuche in vier Typen aufgeteilt in Anlehnung an den Fertigungsprozess ihrer Herstellung. Die Norm legt weiterhin die Toleranzen für abgelängte Gummi- und Kunststoffschläuche für Industrie- und Kraftfahrzeuganwendungen fest. Diese Norm ist gedacht für den Einsatz mit den entsprechenden Schlauchproduktnormen, sofern nicht eine Begründung für den Gebrauch eines abweichenden Schlauchmaßes vorliegt oder denn für eine besondere Anwendung ein Schlauchmaß mit einem anderen Innendurchmesserbereich benötigt wird.
Tuyaux en caoutchouc et en plastique - Dimensions des tuyaux, diamètres intérieurs minimaux et maximaux, et tolérances sur la longueur de coupe (ISO 1307:2006)
L'ISO 1307:2006 spécifie les dimensions des tuyaux en caoutchouc et en plastique ainsi que les diamètres intérieurs minimaux et maximaux autorisés pour chaque dimension de tuyau. À cet effet, les tuyaux sont divisés en quatre types en fonction de leur procédé de fabrication. La présente norme spécifie également les tolérances sur la longueur de coupe des tuyaux en caoutchouc et en plastique destinés aux applications industrielles et automobiles. Sauf justification relative à l'utilisation d'une dimension différente ou à moins qu'un diamètre nominal nécessite une gamme de diamètres intérieurs différente pour une application particulière, la présente norme est destinée à être utilisée conjointement avec la norme de produit correspondante relative aux tuyaux.
Gumene in polimerne cevi - Velikosti cevi, najmanjši in največji notranji premeri in tolerance dolžin (ISO 1307:2006)
General Information
- Status
- Published
- Publication Date
- 22-Jan-2008
- Withdrawal Date
- 30-Jul-2008
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Drafting Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 23-Jan-2008
- Due Date
- 27-Mar-2009
- Completion Date
- 23-Jan-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Referred By
EN 14540:2004+A1:2007 - Fire-fighting hoses - Non-percolating layflat hoses for fixed systems - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN ISO 1307:2008 is an essential international standard developed by CEN and ISO, focusing on the sizes, inside diameters, and length tolerances of rubber and plastics hoses. This standard specifies the minimum and maximum inside diameters permitted for various hose sizes and establishes tolerances on cut-to-length hoses. It categorizes hoses into four manufacturing types and aligns with relevant hose product standards to ensure consistency and quality in industrial and automotive applications.
This European adoption of ISO 1307:2006 aids manufacturers, suppliers, and users of rubber and plastics hoses by providing clear, uniform guidelines that facilitate product interchangeability and quality control across the European market and internationally.
Key Topics
Hose Size Classification by Manufacturing Type:
EN ISO 1307 defines four distinct hose types based on manufacturing processes:- Type A: Built using a rigid mandrel for precise inside-diameter control
- Type B: Built using a flexible mandrel, including plastic hydraulic hoses
- Type C: Non-mandrel-built hoses
- Type D: Flexible extruded plastics hoses (excluding spiral-reinforced types)
Inside Diameter Specifications:
For each nominal hose size, minimum and maximum inside diameter limits are specified according to the hose type to ensure consistent performance and compatibility with fittings and assemblies.Length Tolerances for Cut-to-Length Hoses:
Specified tolerances on length cuts promote accuracy and reduce material waste. The tolerances vary with hose length, for example:- ±3 mm for hoses up to 300 mm
- ±1% for hoses longer than 1,800 mm
Application Scope:
Standard applies to industrial and automotive rubber and plastics hoses, aligning with other relevant hose product standards unless specific deviations are justified for particular applications.
Applications
EN ISO 1307:2008 serves multiple practical uses, including:
- Quality Assurance: Manufacturers use the standard’s size and tolerance guidelines to verify the conformity of hose products before market release.
- Interchangeability: Enables smooth integration of hoses into assemblies by guaranteeing consistent inside diameters and cut lengths.
- Design and Engineering: Engineering teams leverage these specifications when selecting hose sizes for systems to ensure appropriate flow rates and pressure capacities.
- Inventory Management: Distributors and suppliers manage stock with consistent sizing based on the standard, reducing mismatches and returns.
- Automotive and Industrial Maintenance: Maintains uniform hose dimensions critical for repairs, replacements, and equipment servicing.
Related Standards
EN ISO 1307:2008 complements various other standards related to hose performance, testing, and materials, such as:
- EN ISO 17885 – Specification for rubber hoses for automotive fuel systems
- EN ISO 11237 – Rubber hoses and hose assemblies for petrochemical applications
- ISO 3862 – Rubber hoses and hose assemblies – Wire-braid-reinforced hydraulic types
- ISO 8573 – Compressed air quality standards relevant when hoses are used in pneumatic systems
Together, these standards ensure comprehensive control over hose quality, durability, and safety across diverse industrial sectors.
Keywords: rubber and plastics hoses, hose sizes, inside diameter tolerances, cut-to-length hose tolerances, hose manufacturing types, industrial hoses, automotive hoses, EN ISO 1307, CEN standards, hose quality standard, hose size classification, hose length tolerances.
Frequently Asked Questions
EN ISO 1307:2008 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)". This standard covers: ISO 1307:2006 specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut lengths of rubber and plastics hose for industrial and automotive applications. This standard is intended to be used with the relevant hose product standard unless there is justification for using a different hose size or unless a hose size needs a different inside-diameter range for a particular application.
ISO 1307:2006 specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut lengths of rubber and plastics hose for industrial and automotive applications. This standard is intended to be used with the relevant hose product standard unless there is justification for using a different hose size or unless a hose size needs a different inside-diameter range for a particular application.
EN ISO 1307:2008 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 1307:2008 has the following relationships with other standards: It is inter standard links to EN ISO 1307:1995, EN 1947:2002+A1:2007, EN 14540:2004+A1:2007, EN 1947:2014, EN 694:2014, EN 1360:2013, EN 13483:2013, EN 694:2001+A1:2007, EN 14540:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 1307:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2009
1DGRPHãþD
SIST EN ISO 1307:2000
*XPHQHLQSROLPHUQHFHYL9HOLNRVWLFHYLQDMPDQMãLLQQDMYHþMLQRWUDQMLSUHPHULLQ
WROHUDQFHGROåLQ ,62
Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and
tolerances on cut-to-length hoses (ISO 1307:2006)
Gummi- und Kunststoffschläuche - Schlauchmaße, Kleinst- und Größt-
Innendurchmesser, und Toleranzen bei abgelängten Schläuchen (ISO 1307:2006)
Tuyaux en caoutchouc et en plastique - Diametres nominaux, diametres intérieurs
minimaux et maximaux, et tolérances sur la longueur de coupe (ISO 1307:2006)
Ta slovenski standard je istoveten z: EN ISO 1307:2008
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 1307
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2008
ICS 23.040.70 Supersedes EN ISO 1307:1995
English Version
Rubber and plastics hoses - Hose sizes, minimum and
maximum inside diameters, and tolerances on cut-to-length
hoses (ISO 1307:2006)
Tuyaux en caoutchouc et en plastique - Dimensions des Gummi- und Kunststoffschläuche - Schlauchmaße, Kleinst-
tuyaux, diamètres intérieurs minimaux et maximaux, et und Größt-Innendurchmesser, und Toleranzen bei
tolérances sur la longueur de coupe (ISO 1307:2006) abgelängten Schläuchen (ISO 1307:2006)
This European Standard was approved by CEN on 26 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1307:2008: E
worldwide for CEN national Members.
Foreword
The text of ISO 1307:2006 has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 1307:2008 by Technical Committee CEN/TC 218 "Rubber and plastics hoses
and hose assemblies", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2008, and conflicting national standards
shall be withdrawn at the latest by July 2008.
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any
or all such patent rights.
This document supersedes EN ISO 1307:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of ISO 1307:2006 has been approved by CEN as EN ISO 1307:2008 without any
modifications.
INTERNATIONAL ISO
STANDARD 1307
Fourth edition
2006-09-15
Rubber and plastics hoses — Hose sizes,
minimum and maximum inside diameters,
and tolerances on cut-to-length hoses
Tuyaux en caoutchouc et en plastique — Diamètres nominaux,
diamètres intérieurs minimaux et maximaux, et tolérances sur la
longueur de coupe
Reference number
ISO 1307:2006(E)
©
ISO 2006
ISO 1307:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...