EN ISO 13702:2015
(Main)Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:2015)
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:2015)
ISO 13702:2015 describes the objectives and functional requirements for the control and mitigation of fires and explosions on offshore installations used for the development of hydrocarbon resources.
ISO 13702:2015 is applicable to the following:
fixed offshore structures;
floating systems for production, storage, and offloading;
petroleum and natural gas industries.
Erdöl und Erdgasindustrie - Überwachung und Eindämmung von Feuer und Explosionen auf Offshore-Produktionsplattformen - Anforderungen und Leitlinien (ISO 13702:2015)
Industries du pétrole et du gaz naturel - Contrôle et atténuation des feux et des explosions dans les installations en mer - Exigences et lignes directrices (ISO 13702:2015)
Industrija za predelavo nafte in zemeljskega plina - Nadzor in zajezitev požarov in eksplozij na plavajočih proizvodnih objektih - Zahteve in smernice (ISO 13702:2015)
Ta mednarodni standard opisuje cilje in funkcionalne zahteve za nadzor in zajezitev požarov ter eksplozij na plavajočih proizvodnih objektih, ki se uporabljajo za razvoj virov ogljikovodikov.
Ta mednarodni standard se uporablja za:
– stacionarne plavajoče objekte;
– plavajoče sisteme za proizvodnjo, shranjevanje in pretovarjanje;
– industrijo za predelavo nafte in zemeljskega plina.
Premične plavajoče enote, kot so določene v tem mednarodnem standardu, in podmorske naprave niso zajete, čeprav je mnoga načela iz tega mednarodnega standarda mogoče uporabiti kot smernice. Ta mednarodni standard temelji na pristopu, pri katerem je izbira ukrepov za nadzor in zajezitev požarov ter eksplozij določena z oceno tveganj na plavajočih objektih.
Metodologije, uporabljene pri tej oceni, in izhajajoča priporočila se bodo razlikovala glede na zapletenost proizvodnih postopkov in objektov, vrste objektov (npr. odprti ali zaprti), število članov posadke in okoljske pogoje, ki so povezani s področjem delovanja. OPOMBA: Zakonske zahteve, pravila in predpisi lahko (dodatno) veljajo za posamezne zadevne plavajoče objekte.
General Information
Relations
Related Packages
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
1DGRPHãþD
SIST EN ISO 13702:2000
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DG]RULQ]DMH]LWHYSRåDURYLQ
HNVSOR]LMQDSODYDMRþLKSURL]YRGQLKREMHNWLK=DKWHYHLQVPHUQLFH ,62
Petroleum and natural gas industries - Control and mitigation of fires and explosions on
offshore production installations - Requirements and guidelines (ISO 13702:2015)
Erdöl und Erdgasindustrien - Überwachung und Eindämmung von Feuer und
Explosionen auf Offshore-Produktionsplattformen - Anforderungen und Richtlinien (ISO
13702:2015)
Industries du pétrole et du gaz naturel - Contrôle et atténuation des feux et des
explosions dans les installations en mer - Exigences et lignes directrices (ISO
13702:2015)
Ta slovenski standard je istoveten z: EN ISO 13702:2015
ICS:
13.220.01 Varstvo pred požarom na Protection against fire in
splošno general
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13702
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 75.180.10 Supersedes EN ISO 13702:1999
English Version
Petroleum and natural gas industries - Control and mitigation of
fires and explosions on offshore production installations -
Requirements and guidelines (ISO 13702:2015)
Industries du pétrole et du gaz naturel - Contrôle et Erdöl und Erdgasindustrie - Überwachung und
atténuation des feux et des explosions dans les installations Eindämmung von Feuer und Explosionen auf Offshore-
en mer - Exigences et lignes directrices (ISO 13702:2015) Produktionsplattformen - Anforderungen und Leitlinien (ISO
13702:2015)
This European Standard was approved by CEN on 27 May 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13702:2015 E
worldwide for CEN national Members.
Contents Page
European foreword .3
European foreword
This document (EN ISO 13702:2015) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2016, and conflicting national standards shall be withdrawn
at the latest by February 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13702:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13702:2015 has been approved by CEN as EN ISO 13702:2015 without any modification.
INTERNATIONAL ISO
STANDARD 13702
Second edition
2015-08-01
Petroleum and natural gas
industries — Control and mitigation
of fires and explosions on offshore
production installations —
Requirements and guidelines
Industries du pétrole et du gaz naturel — Contrôle et atténuation des
feux et des explosions dans les installations en mer — Exigences et
lignes directrices
Reference number
ISO 13702:2015(E)
©
ISO 2015
ISO 13702:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 13702:2015(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 5
4 Objectives . 6
5 Fire and explosion evaluation and risk management . 7
5.1 Management system . 7
5.2 Risk assessment and the risk management framework . 7
5.3 Risk assessment process . 7
5.4 Risk identification . 7
5.5 Risk analysis . 8
5.6 Risk evaluation . 8
5.7 Risk treatment . 8
5.7.1 General. 8
5.7.2 Prioritization of risk treatment measures . 9
5.8 Risk treatment in the context of offshore oil and gas operations . 9
5.8.1 General. 9
5.8.2 Design loads . 9
5.8.3 Fire and explosion strategy and performance standards .10
5.8.4 Verification .10
6 Installation layout .11
6.1 Objectives.11
6.2 Functional requirements .11
7 Emergency shutdown systems and blowdown .11
7.1 Objective .11
7.2 Functional requirements .12
8 Control of ignition .12
8.1 Objective .12
8.2 Functional requirements .12
9 Control of spills .13
9.1 Objective .13
9.2 Functional requirements .13
10 Emergency power systems .13
10.1 Objective .13
10.2 Functional requirements .13
11 Fire and gas (F&G) detection systems .13
11.1 Objectives.13
11.2 Functional requirements .14
12 Active fire protection .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.