EN 1866-3:2013
(Main)Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
This European Standard specifies the rules of design, assembling, testing and inspection during manufacturing of mobile CO2 fire extinguishers, which comply with the requirements of EN 1866-1, as far as pressure resistance is concerned.
NOTE 1 Design is limited to design of the assembly.
NOTE 2 The classification of the different parts forming the assembly is given in Annex A.
Fahrbare Feuerlöscher - Teil 3: Anforderungen an die Herstellung, konstruktive Ausführung und Druckfestigkeit von Kohlendioxid-Feuerlöschern, die den Anforderungen von EN 1866-1 entsprechen
Diese Europäische Norm legt die Vorgaben im Hinblick auf die konstruktive Gestaltung, den Zusammenbau, die Prüfung und die Überprüfung während der Fertigung fahrbarer Kohlendioxid Feuerlöscher fest, die den Anforderungen von EN 1866 1 entsprechen, soweit Druckfestigkeit betrachtet wird.
ANMERKUNG 1 Die konstruktive Gestaltung ist auf die konstruktive Gestaltung der Baugruppe begrenzt.
ANMERKUNG 2 Anhang A enthält die Klassifizierung der unterschiedlichen Teile des Feuerlöschers.
Extincteurs d'incendie mobiles - Partie 3: Exigences relatives au montage, à la construction et à la résistance à la pression des extincteurs au dioxyde de carbone conformes aux exigences de l'EN 1866-1
La présente Norme européenne spécifie les règles de conception, d’assemblage, d’essai et d’inspection au cours de la fabrication des extincteurs d'incendie mobiles au dioxyde de carbone conformes aux exigences de l'EN 1866-1, pour ce qui concerne la résistance à la pression.
NOTE 1 La conception se limite à la conception de l'ensemble extincteur.
NOTE 2 La classification des différentes parties de l’ensemble extincteur est donnée dans l’Annexe A.
Prevozni gasilniki - 3. del: Zahteve za proizvodnjo, konstrukcijo in tlačno odpornost gasilnikov s CO2 v skladu z zahtevami standarda EN 1866-1
Ta evropski standard določa pravila zasnove, proizvodnje, preskušanja in pregledovanja pri izdelavi prevoznih gasilnikov s CO2 v skladu z zahtevami standarda EN 1866-1 glede tlačne odpornosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbare Feuerlöscher - Teil 3: Anforderungen an die Herstellung, konstruktive Ausführung und Druckfestigkeit von Kohlendioxid-Feuerlöschern, die den Anforderungen von EN 1866-1 entsprechenExtincteurs d'incendie mobiles - Partie 3: Exigences relatives au montage, à la construction et à la résistance à la pression des extincteurs au dioxyde de carbone conformes aux exigences de l'EN 1866-1Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-113.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 1866-3:2013SIST EN 1866-3:2013en,fr,de01-oktober-2013SIST EN 1866-3:2013SLOVENSKI
STANDARDSIST EN 1866:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1866-3
May 2013 ICS 13.220.10 Supersedes EN 1866:2005
English Version
Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
Extincteurs d'incendie mobiles - Partie 3: Exigences relatives au montage, à la construction et à la résistance à la pression des extincteurs au dioxyde de carbone conformes aux exigences de l'EN 1866-1
Fahrbare Feuerlöscher - Teil 3: Anforderungen an die Herstellung, konstruktive Ausführung und Druckfestigkeit von Kohlendioxid-Feuerlöschern, die den Anforderungen von EN 1866-1 entsprechen This European Standard was approved by CEN on 28 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1866-3:2013: E SIST EN 1866-3:2013
Classification of the different parts of an extinguisher subject to internal pressure .9 Annex B (normative)
Thread sizes for cylinder and valves of mobile CO2 extinguishers . 10 Annex C (normative)
Test for burst pressure of hose assembly with attached components . 11 Annex D (informative)
Filling ratios and pressures for CO2 . 12 Annex ZA (informative)
Relationship between this European Standard and the essential requirements of EU Directive 97/23/EC . 13 Bibliography . 14
(ISO 10297) EN ISO 11363-1, Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications (ISO 11363-1) EN ISO 15245-1, Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification (ISO 15245-1) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 mobile fire extinguisher portable fire extinguisher with a total mass > 20 kg, fitted with wheels to enable the user to manually move and operate the extinguisher 3.2 pressure at maximum operating temperature
pressure experimentally measured PTmax pressure measured in the extinguisher after stabilisation during at least 24 h at maximum operating temperature Tmax (≥ 60 °C) 3.3 maximum allowable pressure
maximum declared pressure PS maximum pressure for which the equipment is designed, as specified by the manufacturer and which is in any case greater than or equal to PTmax 3.4 cylinder valve component subject to the internal pressure and used to close off and seal the cylinder SIST EN 1866-3:2013
Pr maximum pressure measured during a bursting test 3.9 Tmax maximum operating temperature declared by the manufacturer 3.10
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.