EN 1051-1:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v stavbah – Stekleni zidaki in stekleni tlakovci – 1. del: Definicije in opisGlas in Bauwesen - Glassteine und Betongläser - Teil 1: Begriffe und BeschreibungVerre dans la construction - Briques de verre et dalles de verre - Partie 1: Définitions et descriptionsGlass in building - Glass blocks and glass pavers - Part 1: Definitions and description81.040.20Steklo v gradbeništvuGlass in building01.040.81Glass and ceramics industries (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 1051-1:2003SIST EN 1051-1:2004en01-september-2004SIST EN 1051-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1051-1January 2003ICS 81.040.20; 91.100.25English versionGlass in building - Glass blocks and glass pavers - Part 1:Definitions and descriptionGlas in Bauwesen - Glassteine und Betongläser - Teil 1:Begriffe und BeschreibungThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1051-1:2003 ESIST EN 1051-1:2004

Compressive strength test for glass blocks.10Annex B (normative)
Compressive strength test for glass pavers.11Annex C (informative)
Form/shape, dimensions and nominal mass of glass blocks.12SIST EN 1051-1:2004

Glass blocks are usually manufactured by fusing or bonding together two or more units under applied pressure to forman airtight seal.SIST EN 1051-1:2004

Glass pavers can be produced as a single piece, or by fusing or bonding together two or more units to form an airtightseal.3.3visual faultsfaults that alter the visual quality of the glass. They include spot faults, opaque inclusions and linear/extended faults3.4spot faultstransparent/translucent faults, e.g. bubbles, etc., that are in the glass3.5opaque inclusionsopaque bodies, e.g. refractory, frit, etc., which are either in the glass or on the surface3.6linear/extended faultsthese faults can be on or in the glass, in the form of deposits, marks or scratches that occupy an extended length orarea4 Material4.1
...