EN ISO 22748:2021

SLOVENSKI STANDARD
01-oktober-2021
Vpojni pripomočki za inkontinenco za urin in/ali blato - Tipi proizvodov in slike
(ISO 22748:2021)
Absorbent incontinence products for urine and/or faeces - Product type names and
illustrations (ISO 22748:2021)
Saugfähige Inkontinenzhilfen für Urin und/oder Stuhl - Terminologie und Klassifikation
(ISO 22748:2021)
Produits d'incontinence pour l'absorption d'urine et/ou de matières fécales - Noms de
types de produits et illustrations (ISO 22748:2021)
Ta slovenski standard je istoveten z: EN ISO 22748:2021
ICS:
01.040.11 Zdravstveno varstvo Health care technology
(Slovarji) (Vocabularies)
11.180.20 Pripomočki pri stomi in Aids for incontinence and
inkontinenci ostomy
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22748
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 01.040.11; 11.180.20
English Version
Absorbent incontinence products for urine and/or faeces -
Product type names and illustrations (ISO 22748:2021)
Produits d'incontinence pour l'absorption d'urine Saugfähige Inkontinenzhilfen für Urin und/oder Stuhl -
et/ou de matières fécales - Noms de types de produits Terminologie und Klassifikation (ISO 22748:2021)
et illustrations (ISO 22748:2021)
This European Standard was approved by CEN on 22 June 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22748:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 22748:2021) has been prepared by Technical Committee ISO/TC 173 "Assistive
products" in collaboration with Technical Committee CEN/TC 293 “Assistive products and accessibility”
the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22748:2021 has been approved by CEN as EN ISO 22748:2021 without any modification.

INTERNATIONAL ISO
STANDARD 22748
First edition
2021-07
Absorbent incontinence products for
urine and/or faeces — Product type
names and illustrations
Produits d'incontinence pour l'absorption d'urine et/ou de matières
fécales — Noms de types de produits et illustrations
Reference number
ISO 22748:2021(E)
©
ISO 2021
ISO 22748:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 22748:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Product type names . 1
4.1 Absorbent products for children . 1
4.1.1 Pads for children . 1
4.1.2 All-in-ones for children . 2
4.1.3 Pull-ons for children . 2
4.1.4 Washable all-in-ones for children . 2
4.2 Absorbent products for adults . 3
4.2.1 Pads . 3
4.2.2 All-in-ones . 3
4.2.3 Pull-ons . 3
4.2.4 Belted pads . 4
4.2.5 Pads for underwear . 4
4.2.6 Male pouches . 4
4.2.7 Male pads . 5
4.2.8 Unbacked pads . . . 5
4.2.9 Faecal pads . 5
4.2.10 Washable products. 6
4.2.11 Fixation underwear . 6
4.3 Underpads . 7
4.3.1 Underpads single-use . 7
4.3.2 Underpads washable . 7
Bibliography . 8
ISO 22748:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 173, Assistive products, Subcommittee SC
3, Aids for ostomy and incontinence, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/TC 293, Assistive products and accessibility, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

ISO 22748:2021(E)
Introduction
Incontinence is defined as the complaint of any involuntary leakage of urine and/or faeces. It is
estimated that 400 million people are affected by incontinence worldwide and the number is increasing
as the population in many countries ages. Incontinence that cannot be (fully) cured is most commonly
managed using absorbent products.
Products come in a range of different designs but the terms that are currently used to describe the
product types vary considerably among - and even within – countries, resulting in a confusing variety
of synonyms among clinicians and academics and in the literature provided by pro
...