EN 14908-3:2006
(Main)Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of the standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this European Standard will prevail.
Firmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude Netzwerk Protokoll - Teil 3: Kommunikation über die Stromversorgungsleitungen
Réseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment - Partie 3: Spécification des communications pour courants porteurs
La présente Norme européenne spécifie toute l'information nécessaire pour faciliter l'échange de données et l'information de contrôle du protocole sur le médium réseau de puissance.
La présente Norme européenne établit un ensemble minimum de règles pour la conformité. Elle n'exclut pas les services supplémentaires à fournir, pour autant que ces règles soient associées au domaine du système. Il est prévu que cette norme permette aux extensions de services (définies par l'utilisateur) de coexister.
Certains aspects de la norme sont définis dans d'autres documents. Ces documents sont référencés autant que de besoin. Dans le cas où une norme référencée entre en contradiction avec la présente Norme européenne, cette dernière prévaut.
Odprta izmenjava podatkov v avtomatizaciji stavb in izvršnih elementov ter pri upravljanju stavb - Protokol regulacijske mreže - 3. del: Specifikacija kanala močnostnega napajanja
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel SpecificationRéseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment - Partie 3: Spécification des communications pour courants porteursFirmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude Netzwerk Protokoll - Teil 3: Kommunikation über die StromversorgungsleitungenTa slovenski standard je istoveten z:EN 14908-3:2006SIST EN 14908-3:2007en97.120Avtomatske krmilne naprave za domAutomatic controls for household use35.240.99IT applications in other fieldsICS:SLOVENSKI
STANDARDSIST EN 14908-3:200701-februar-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14908-3November 2006ICS 35.240.99; 97.120 English VersionOpen Data Communication in Building Automation, Controls andBuilding Management - Control Network Protocol - Part 3: PowerLine Channel SpecificationRéseau ouvert de communication de données pourl'automatisation, la régulation et la gestion technique dubâtiment - Protocole de réseau pour le bâtiment - Partie 3:Spécification des communications pour courants porteursFirmenneutrale Datenkommunikation für dieGebäudeautomation und Gebäudemanagement - GebäudeNetzwerk Protokoll - Teil 3: Kommunikation über dieStromversorgungsleitungenThis European Standard was approved by CEN on 11 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14908-3:2006: E
EN 14908-2 (Twisted Pair)EN 14908-3 (Power-Line)EN 14908-4 (IP Communication)• ••Scope of this European Standard
Figure 1 — Relationship of CNP 3 Specification to the CNP 1 Specification Model
installations in the frequency range 3 kHz
to 148, 5 kHz — Part 1: General
requirements, frequency bands and
electromagnetic disturbances EN 50065-2-1, Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz —
Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments EN 50065-2-2, Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14908-1:2005 and the following, specifically with the power line medium and physical layer shown in Figure 1, apply. 3.1 PL Node user node attached to the power line medium at a tap that meets the requirements of this specification 3.2 Line Cord cable not part of the power line network that allows a node located away from the power line network to be connected to the network 3.3 Power Line Network communication network based on power distribution lines (“power lines”), from the final distribution transformer to and including all homes served by that transformer, including all wiring in those homes 3.4 Non-Network-Powered Node compatible node that attaches to the power line network but does not draw any power from the network
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.