91.140.01 - Installations in buildings in general

This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including:
(a) support of each claimed BACnet service, either as an initiator, executor, or both,
(b) support of each claimed BACnet object-type, including both required properties and each claimed optional property,
(c) support of the BACnet network layer protocol,
(d) support of each claimed data link option, and
(e) support of all claimed special f...view more

This European Standard specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. The standard describes services in layer 2 and layer 3.
The layer 2 (data link layer) specification also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The layer 3 (network layer), as described in EN 14908-1, is integrated in UDP/IP communicatio...view more

This document specifies a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control using web-services. The document describes services in layer 2 and layer 3.
The layer 2 (data link layer) specification also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The layer 3 (network layer), as described in EN 14908 1, is integrated in UDP/IP communication using I...view more

This document specifies requirements for indoor environmental parameters for thermal environment, indoor air quality, lighting and acoustics and specifies how to establish these parameters for building system design and energy performance calculations.
This European Standard includes design criteria for the local thermal discomfort factors, draught, radiant temperature asymmetry, vertical air temperature differences and floor surface temperature.
This European Standard is applicable where the ...view more

This document deals with the indoor environmental parameters for thermal environment, indoor air quality, lighting and acoustic. The document explains how to use EN 16798-1 for specifying indoor environmental input parameters for building system design and energy performance calculations. The document specifies methods for long term evaluation of the indoor environment obtained as a result of calculations or measurements. The document specifies criteria for measurements which can be used if requ...view more

The purpose of ISO 16484-5:2017 is to define data communication services and protocols for computer equipment used for monitoring and control of HVAC&R and other building systems and to define, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of digital control technology in buildings.

This European Standard provides mechanisms through which various vendors of building automation, control, and building management systems may exchange information in a standardized way.
This document provides specifications for the Application Elements of Control Network Protocol packets as follows:
-   definitions of standardized packet (network-variable) data types;
-   definitions of device-interface files;
-   definitions of standardized configuration-property types;
-   definitions of standar...view more

This European Standard is applicable to specific energy audit requirements in buildings. It specifies the requirements, methodology and deliverables of an energy audit in a building or group of buildings, excluding individual private dwellings. It shall be applied in conjunction with, and is supplementary to, EN 16247 1, Energy audits  - Part 1: General requirements. It provides additional requirements to EN 16247 1 and shall be applied simultaneously.
If processes are included in the scope of ...view more

ISO 15758:2014 specifies a method for calculating the density of the water vapour flow rate in cold pipe insulation systems, and the total amount of water diffused into the insulation over time. The calculation method presupposes that water vapour can only migrate into the insulation system by diffusion, with no contribution from airflow. It also assumes the use of homogeneous, isotropic insulation materials so that the water vapour partial pressure is constant at all points equidistant from the...view more

ISO 15758:2014 specifies a method for calculating the density of the water vapour flow rate in cold pipe insulation systems, and the total amount of water diffused into the insulation over time. The calculation method presupposes that water vapour can only migrate into the insulation system by diffusion, with no contribution from airflow. It also assumes the use of homogeneous, isotropic insulation materials so that the water vapour partial pressure is constant at all points equidistant from the...view more

This European Standard specifies the transporting of the Control Network Protocol (CNP) packets for commercial Building Automation, Controls and Building Management over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of this European Standard is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol...view more

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in commercial Building Automation, Controls and Building Management and is used in conjunction with EN 14908-1:2014. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics.
This European Standard covers the compl...view more

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems in commercial Building Automation, Controls and Building Management.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (de...view more

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physic...view more

This European Standard gives guidelines for performance benchmarking and contains clear terms and definitions as well as methods for benchmarking facility management products and services as well as facility management organisations and operations.
This European Standard establishes a common basis for benchmarking facility management costs, floor areas and environmental impacts as well as service quality, satisfaction and productivity.
This European Standard is applicable to Facility Managemen...view more

This part of ISO 10295 provides guidance in respect of a structured method of characterizing the penetrating seal under test utilizing a series of defined parameters, each one being determined by the use of a selected series of test configurations in conjunction with simulated services. The level of characterization being sought is dependent upon the classification requirement of the system, which in turn determines the complexity of the test program. It is also intended the test method addresse...view more

This European standard provides guidance to FM organisations on the development and improvement of their processes to support the primary processes.
This standard also sets out basic principles, describes high-level generic FM processes, lists strategic, tactical and operational processes and provides examples of process workflows.
This standard is written from a primary processes, demand perspective for an audience of all stakeholders in FM processes.

FM covers and integrates a very broad scope of processes, products / services, activities and facilities. The approach of this standard is to consider the added value provided to the primary activities by adopting a product perspective as recognised by the primary processes or core business in the organisation. This standard therefore introduces the concept of standardised (classified) facility products.
The scope of this standard is to provide taxonomy for FM which includes:
-   relevant interr...view more

This European Standard provides a guideline how to measure, achieve and improve quality in FM. It gives complementary guidelines to EN ISO 9000, EN ISO 9001 and EN 15221-2 within the framework of EN 15221 1. The standard provides a link into management methods and management theories.
This European Standard is applicable to:
-   FM in public and private organizations;
-   client organization and service provider relationships;
-   full range of facility products or facility services;
-   both types...view more

This European Standard establishes a common basis for planning and design, area and space management, financial assessment, as well as a tool for benchmarking in the field of Facility Management.
This standard covers area and space measurement for existing owned or leased buildings as well as buildings in state of planning or development.
This standard presents a framework for measuring floor areas within buildings and areas outside of buildings. In addition, it contains clear terms and defini...view more