iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 526:1993

(Main)

Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

This standard applies to gangways on inland navigation vessels except those gangways intended for passengers. It specifies types, main dimensions and test conditions which have to be observed for safety reasons. A gangway serves as walkway between ship and shore.

Fahrzeuge der Binnenschiffahrt - Landstege bis 8 m Länge - Anforderungen, Bauarten

Diese Norm gilt für Landstege auf Fahrzeugen der Binnenschiffahrt mit Ausnahme der für Fahrgäste bestimmten Landstege. Sie legt Bauart, Hauptmasse und Prüfbedingungen fest, die aus sicherheitstechnischen Gründen eingehalten werden müssen. Landstege dienen als Verkehrsweg zwischen Bord und Land.

Bateaux de navigation intérieure - Passerelles d'embarquement d'une longueur qui ne dépasse pas 8 m - Exigences, types

La présente norme est applicable aux passerelles d'embarquement sur les bateaux de navigation intérieure à l'exception des passerelles d'embarquement destinées aux passagers. Elle spécifie les types, les dimensions principales et les conditions d'essai qui doivent être respectés pour des raisons de sécurité. Une passerelle d'embarquement sert d'accès du navire à terre et vice versa.

Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

General Information

Status
Published
Publication Date
21-Sep-1993
Withdrawal Date
30-Mar-1994
ICS
47.020.10 - Hulls and their structure elements
Technical Committee
CEN/TC 15 - Inland navigation vessels
Drafting Committee
CEN/TC 15 - Inland navigation vessels
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
12-Dec-2019
Ref Project
SIST EN 526:2000 - Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements, types

Buy Standard

EN 526:2000EN 526:2000
PreviousNext
Standard
EN 526:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2000
Inland navigation vessels - Gangway with a length not exceeding 8 m -
Requirements, types
Inland navigation vessels - Gangway with a length not exceeding 8 m - Requirements,
types
Fahrzeuge der Binnenschiffahrt - Landstege bis 8 m Länge - Anforderungen, Bauarten
Bateaux de navigation intérieure - Passerelles d'embarquement d'une longueur qui ne
dépasse pas 8 m - Exigences, types
Ta slovenski standard je istoveten z: EN 526:1993
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.060 -H]HUVNDLQUHþQDSORYLOD Inland navigation vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 711:2024(Main)
Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types
SIST EN 711:2024

This document is applicable to railings for decks and in gangways on inland navigation vessels. It lays down design, dimensions, strength and test conditions which have to be observed for safety reasons. The railings provide protection for persons against falling overboard and from one deck to another.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1502:2023(Main)
Inland navigation vessels - Boarding stairs
SIST EN 1502:2023

This document is applicable to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods for boarding stairs.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be used up to a height of around 3,0 m above the light water-line.
Boarding stairs are not intended for use by passengers.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17361:2023(Main)
Inland navigation vessels - Outboard ladders
SIST EN 17361:2023

This document is applicable to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where boarding stairs according to EN 1502 are not sufficient in length. This range starts at a boarding height of approximately at 2,8 m above the light water-line.
Outboard ladders are not intended for use by passengers.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17360:2020(Main)
Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
SIST EN 17360:2020

This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 790:2001(Main)
Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types
SIST EN 790:2002

1 Scope
This European Standard applies to stairs with inclination angles of 45° to 60°, having at least two steps, in working areas of inland navigation vessels.
It does not apply to stairs in passenger areas.
NOTE  Whenever possible, stairs specified in EN 13056 should be preferred.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13056:2000(Main)
Inland navigation vessels - Stairs with inclination angles of 30° to < 45° - Requirements, types
SIST EN 13056:2002

This European Standard applies to stairs with inclination angles of 30 degrees to 45 degrees, having at least 2 steps, used on inland navigation vessels. These stairs are fixed in the passenger area, the accomodation and working areas of inland navigation vessels. NOTE Stairs with lower practicability used in restricted locations are covered by prEN 790:1999 for the working area.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 711:2024(Main)
Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types
SIST EN 711:2024

This document is applicable to railings for decks and in gangways on inland navigation vessels. It lays down design, dimensions, strength and test conditions which have to be observed for safety reasons. The railings provide protection for persons against falling overboard and from one deck to another.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1502:2023(Main)
Inland navigation vessels - Boarding stairs
SIST EN 1502:2023

This document is applicable to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods for boarding stairs.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be used up to a height of around 3,0 m above the light water-line.
Boarding stairs are not intended for use by passengers.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17361:2023(Main)
Inland navigation vessels - Outboard ladders
SIST EN 17361:2023

This document is applicable to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where boarding stairs according to EN 1502 are not sufficient in length. This range starts at a boarding height of approximately at 2,8 m above the light water-line.
Outboard ladders are not intended for use by passengers.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12215-7:2020(Main)
Small craft - Hull construction and scantlings - Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5 (ISO 12215-7:2020)
SIST EN ISO 12215-7:2021

This document defines the dimensions, local design pressures and global loads acting on multihull craft with a hull length (LH) or load line length of up to 24 m (see Note). It considers all parts of the craft that are assumed watertight or weathertight when assessing stability, freeboard and buoyancy in accordance with ISO 12217 (all parts). Scantlings corresponding to the local design pressures are then assessed using ISO 12215-5.
NOTE       The load line length is defined in the OMI "International Load Lines Convention 1966/2005", it can be smaller than LH for craft with overhangs. This length also sets up at 24 m the lower limit of several IMO conventions.
This document is applicable to multihulls built from the same materials as in ISO 12215-5, in intact condition, and of the two following types:
—          recreational craft, including recreational charter vessels;
—          commercial craft and workboats.
It is not applicable to multihull racing craft designed only for professional racing.
This document is applicable to the structures supporting windows, portlights, hatches, deadlights and doors.
For the complete scantlings of the craft, this document is intended to be used in conjunction with ISO 12215-8 for rudders, ISO 12215-9 for appendages of sailing craft and ISO 12215-10 for rig loads and rig attachment in sailing craft. ISO 12215-6 can be used for additional details.
Throughout this document, unless otherwise specified, dimensions are in (m), areas in (m2), masses in (kg), forces in (N), moments in (Nm), Pressures in (kN/m2) (1 kN/m2 = 1 kPa), stresses and elastic modulus in (N/mm2) (1 N/mm2 = 1 MPa).

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day