iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13083:2008/FprA1

(Amendment)

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

The subject of this amendment shall be the deletion of 5.14 dealing with the cap.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladung

Citernes de transport de matières dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le bas

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Spojka za polnjenje in praznjenje z dna - Dopolnilo A1

General Information

Status
Not Published
ICS
13.300 - Protection against dangerous goods
23.020.20 - Vessels and containers mounted on vehicles
23.040.60 - Flanges, couplings and joints
Technical Committee
CEN/TC 296 - Tanks for transport of dangerous goods
Drafting Committee
CEN/TC 296/WG 7 - Service equipment (including equipment for vapour recovery, bottom loading, the confinement and handling of petroleum products)
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
30-Jan-2013
Due Date
16-Aug-2013
Completion Date
30-Jan-2013
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
Mandate
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
SIST EN 13083:2009/kFprA1:2012 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

Relations

Merged Into
EN 13083:2008+A1:2013 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Effective Date
13-Feb-2013
Amends
EN 13083:2008 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Effective Date
07-Dec-2011

Buy Standard

EN 13083:2009/kFprA1:2012EN 13083:2009/kFprA1:2012
PreviousNext
Draft
EN 13083:2009/kFprA1:2012
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2012
Posode za prevoz nevarnega blaga - Oprema za oskrbovanje posod - Spojka za
polnjenje in praznjenje z dna - Dopolnilo A1
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for
bottom loading and unloading
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-
Kupplung für Untenbefüllung und -entladung
Citernes de transport de matières dangereuses - Équipement de service pour citernes -
Adaptateur pour le chargement et le déchargement par le bas
Ta slovenski standard je istoveten z: EN 13083:2008/FprA1
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 13083:2008
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
August 2012
ICS 13.300; 23.020.20; 23.040.60
English Version
Tanks for transport of dangerous goods - Service equipment for
tanks - Adaptor for bottom loading and unloading
Citernes de transport de matières dangereuses - Tanks für die Beförderung gefährlicher Güter -
Équipement de service pour citernes - Adaptateur pour le Bedienungsausrüstung von Tanks - VK-Kupplung für
chargement et le déchargement par le bas Untenbefüllung und -entladung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 296.
This draft amendment A1, if approved, will modify the European Standard EN 13083:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN Al
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13083:2008+A1:2013(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
SIST EN 13083:2009+A1:2013

This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading.
This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008+A1:2012(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009+A1:2012

This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.
This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008/FprA1(Amendment)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009/kFprA1:2011
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13083:2008+A1:2013(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
SIST EN 13083:2009+A1:2013

This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading.
This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008+A1:2012(Main)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009+A1:2012

This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.
This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13081:2008/FprA1(Amendment)
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
SIST EN 13081:2009/kFprA1:2011
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17308:2024(Main)
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
kSIST FprEN 17308:2024

This document specifies two different methods for the quantitative estimation of non-metallic content remaining adhered to the steel wire obtained from the recovery of materials from end-of-life tyres.
The pyrolysis method is considered as the reference method while the hydrostatic method is considered as an in situ method.
This document includes sample collection and the preparation of representative samples based on a sampling plan for the purpose of their characterization.
This document does not apply to the operational performance or fitness for use of the materials which are deemed to be a function of agreements between the manufacturer and the customer.
This document does not apply to address all the safety concerns, if any, associated with its use. This document does not establish appropriate safety and health practices and does not determine the applicability of regulatory limitations prior to its use.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10205:2024(Main)
Cold reduced tinmill products - Blackplate
oSIST prEN 10205:2023

This document specifies requirements for blackplate product in the form of coils intended for direct use and mostly for the production of electrolytically zinc coated plate, or coils electrolytically coated with either tin (tinplate) or chromium/chromium oxide (ECCS or ECCS-RC).
Blackplate can be a single or double reduced product and is specified in nominal thicknesses that are multiples of 0,005 mm from typical 0,10 mm up to 0,60 mm.
This document applies to coils in nominal minimum widths of 600 mm.
In addition to this document, the general technical delivery conditions of EN 10021 apply.
NOTE   Standard width coils for specific uses, e.g. tab stock, can be slit into narrow strip for supply in coil form.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18055-1:2024(Main)
Postal services - Harmonized track and trace events - Part 1: Forward flow
SIST-TS CEN/TS 18055-1:2025

The scope of this document is the forward flow of E-Commerce items. Starting point is arrival at a lo-gistic service provider, end point is the final delivery, or at least the attempt to final delivery.
The returns flows, either caused by unsuccessful delivery, "return to sender" or as a service for recipi-ents to send a received shipment back, are not covered by the forward events. To keep this document unambiguous and easy to understand, these return flows are excluded. Return flows may be covered in a separate technical specification.
Not in scope are the logistical flows within the facilities of the producers and sellers of the items. These fall outside the responsibility of the CEN/TC 331 domain.
Excluded as well, are all events necessary for an LSP to track items within its own facilities. It is up to the LSP how to run its business, and internal standards are in place for the management of internal process-es. Internal events are considered to be of no interest to a recipient, with the exception of some of the last mile events which are mentioned later in this document.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17889:2024(Main)
District heating pipes - Factory made flexible pipe systems - Classification, requirements and test methods for bonded or non-bonded system with thermoplastic reinforced service pipes (TRSP)
SIST-TS CEN/TS 17889:2025

This document specifies classification, general requirements and test methods for flexible, factory made, buried district heating pipe systems with thermoplastic reinforced service pipes (TRSP).
The factory made bonded or non-bonded flexible pipe systems, covered by this document, consists of:
-   Thermoplastic reinforced service pipe, which consists of an inner layer made of PE-Xa, a thermoplastic intermediate layer, a reinforcement layer made of para-aramid fibres, an outer thermoplastic layer and a diffusion barrier layer, all with bonded structure;
-   Thermal insulation layer;
-   Casing made of PE.
Depending on the temperature profile, this document is applicable to a maximum operating temperature of 115 °C and maximum operating design pressure up to 1,6 MPa.
The pipe systems are designed for a service life of at least 30 years.
This document does not apply to cover surveillance systems.
NOTE   For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in this document.
A guideline for testing the pipe assembly is given in Annex D.

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day