LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

This European Standard specifies the design, testing and marking requirements for spring loaded pressure relief valves (PRV), for use in liquefied petroleum gas (LPG) cylinders.
These PRVs can be either an integral part of a cylinder valve (see EN ISO 14245 [3] and EN ISO 15995 [4]) or a separate device.
This European Standard does not exclude the use of other designs of pressure relief devices that provide a similar level of safety.

Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG)

Diese Europäische Norm legt die Anforderungen an die Auslegung, Prüfung und Kennzeichnung von federbelasteten Sicherheitsventilen (PRV, en: pressure relieve valves) für die Verwendung in Flaschen für Flüssiggas (LPG, en: liquefied petroleum gas) fest.
Bei diesen Sicherheitsventilen kann es sich entweder um ein fest eingebautes Teil eines Flaschenventils (siehe EN ISO 14245 [3] und EN ISO 15995 [4]) oder um eine getrennte Einrichtung handeln.
Diese Europäische Norm schließt die Verwendung anderer Arten von Druckentlastungseinrichtungen, welche ein gleichwertiges Sicherheitsniveau sicherstellen, nicht aus.

Équipements et accessoires GPL - Soupapes de sécurité des bouteilles transportables et rechargeables pour gaz de pétrole liquéfiés (GPL)

La présente Norme européenne spécifie les exigences de conception, d'essais et de marquage des soupapes de sécurité à action par ressort, utilisées pour les bouteilles de gaz de pétrole liquéfiés (GPL).
Ces soupapes peuvent faire partie intégrante du robinet de la bouteille (voir l'EN ISO 14245 [3] et l'EN ISO 15995 [4]) ou constituer un dispositif séparé.
La présente Norme européenne n'exclut pas l'utilisation de dispositifs contre les surpressions de conceptions différentes à condition qu'ils garantissent le même niveau de sécurité.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za premične, ponovno polnljive jeklenke za utekočinjeni naftni plin (UNP)

Ta evropski standard določa zahteve glede konstruiranja, preskušanja in označevanja varnostnih ventilov za uporabo na jeklenkah z utekočinjenim naftnim plinom (UNP). Ti ventili so lahko sestavni del ventila jeklenke (glej EN 13152 in EN 13153) ali ločen pripomoček. Ta evropski standard ne izključuje uporabe drugih oblik varnostnih pripomočkov, ki zagotavljajo enakovredno stopnjo varnosti. Dodajanje posodobitve okoljskega dodatka z uskladitvijo terminologije s standardom ISO/DIS 28622.

General Information

Status
Withdrawn
Publication Date
03-Mar-2015
Withdrawal Date
08-Dec-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Dec-2020

Relations

Buy Standard

Standard
EN 13953:2015
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG)Équipements et accessoires GPL - Soupapes de sûreté des bouteilles transportables et rechargeables pour gaz de pétrole liquéfiés (GPL)LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)23.060.40Pressure regulators23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 13953:2015SIST EN 13953:2015en,fr,de01-maj-2015SIST EN 13953:2015SLOVENSKI
STANDARDSIST EN 13953:2003+A1:20071DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13953
March 2015 ICS 23.060.40 Supersedes EN 13953:2003+A1:2007English Version
LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
Équipements et accessoires GPL - Soupapes de sécurité des bouteilles transportables et rechargeables pour gaz de pétrole liquéfiés (GPL)
Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG) This European Standard was approved by CEN on 29 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13953:2015 ESIST EN 13953:2015

Terms used with pressure relief valves . 15 Annex B (normative)
Special low temperature requirements for valves . 16 Annex C (normative)
Sizing of PRVs for LPG cylinders . 17 Annex D (informative)
Production testing. 18 D.1 General . 18 D.2 Setting and leak testing of PRVs . 18 D.3 Batch samples . 18 D.4 Rejection criteria . 18 D.5 Documentation . 18 Bibliography . 19 SIST EN 13953:2015

Foreword This document (EN 13953:2015) has been prepared by Technical Committee CEN/TC 286 “Liquefied petroleum gas equipment and accessories”, the secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13953:2003+A1:2007. — This European Standard has been submitted for reference into the technical annexes of the ADR [1]. NOTE These regulations take precedence over any clause of this European Standard. It is emphasized that ADR is regularly at intervals of two years which may lead to temporary non-compliances with the clauses of this European Standard. The major changes to this revision include: — change to the nominal set pressure; — restructure of Clause 7, Testing and Inspection of the design; — introduction of an endurance test. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13953:2015
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.