EN ISO 18134-2:2015
(Main)Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2015)
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2015)
ISO 18134-2:2015 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for routine production control on site. The method described in this International Standard is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
NOTE The term moisture content, when used with biomass materials, can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which might evaporate when determining moisture content by oven drying (see References [2] and [3]).
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes Verfahren (ISO 18134-2:2015)
Biocombustibles solides - Dosage de la teneur en humidité - Méthode de séchage à l'étuve - Partie 2: Humidité totale - Méthode simplifiée (ISO 18134-2:2015)
ISO 18134-2:2015 décrit la méthode de détermination de la teneur en humidité totale d'un échantillon pour essai de biocombustibles solides par séchage à l'étuve. Cette méthode peut être utilisée lorsque la précision maximale n'est pas nécessaire, par exemple, pour un contrôle de routine de la production in situ. La méthode décrite dans la présente Norme internationale est applicable à l'ensemble des biocombustibles solides. La teneur en humidité des biocombustibles solides (à réception) est toujours rapportée à la masse totale de l'échantillon pour essai (base humide).
NOTE Lorsqu'il est employé dans un contexte de matériaux de biomasse, le terme « teneur en humidité » peut prêter à confusion, car la biomasse non traitée contient souvent des quantités variables de composés volatils (extraits) susceptibles de s'évaporer lors de la détermination de la teneur en humidité par séchage à l'étuve (voir Références [2] et [3]).
Trdna biogoriva - Določevanje vlage - Metoda sušenja v peči - 2. del: Celotna vlaga - Poenostavljena metoda (ISO 18134-2:2015)
Ta dokument opisuje metodo določevanja celotne vlage v vzorcu trdnih biogoriv s sušenjem v peči in se lahko uporabi, če pri določevanju vlage ni potrebna najvišja raven natančnosti (npr. pri rutinski kontroli proizvodnje na mestu uporabe). V tem dokumentu opisana metoda se uporablja za vse izvore trdnih biogoriv. Celotna vlaga biogoriv ni absolutna vrednost in pogoje za njeno določitev je treba standardizirati, da se omogoči primerjalno določevanje.
General Information
- Status
- Withdrawn
- Publication Date
- 22-Sep-2015
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 335 - Solid biofuels
- Drafting Committee
- CEN/TC 335 - Solid biofuels
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Feb-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2016
Get Certified
Connect with accredited certification bodies for this standard
DNV
DNV is an independent assurance and risk management provider.
Lloyd's Register
Lloyd's Register is a global professional services organisation specialising in engineering and technology.
ABS Group Brazil
ABS Group certification services in Brazil.
Sponsored listings
Frequently Asked Questions
EN ISO 18134-2:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2015)". This standard covers: ISO 18134-2:2015 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for routine production control on site. The method described in this International Standard is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis). NOTE The term moisture content, when used with biomass materials, can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which might evaporate when determining moisture content by oven drying (see References [2] and [3]).
ISO 18134-2:2015 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and may be used when the highest precision is not needed, e.g. for routine production control on site. The method described in this International Standard is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis). NOTE The term moisture content, when used with biomass materials, can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which might evaporate when determining moisture content by oven drying (see References [2] and [3]).
EN ISO 18134-2:2015 is classified under the following ICS (International Classification for Standards) categories: 27.190 - Biological sources and alternative sources of energy; 75.160.10 - Solid fuels; 75.160.40 - Biofuels. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 18134-2:2015 has the following relationships with other standards: It is inter standard links to EN 14774-2:2009, EN ISO 18134-2:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 18134-2:2015 is associated with the following European legislation: EU Directives/Regulations: 2000/76/EC; Standardization Mandates: M/298. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 18134-2:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2015
1DGRPHãþD
SIST EN 14774-2:2010
7UGQDELRJRULYD'RORþHYDQMHYODJH0HWRGDVXãHQMDYSHþLGHO &HORWQDYODJD
3RHQRVWDYOMHQDPHWRGD ,62
Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total
moisture - Simplified method (ISO 18134-2:2015)
Feste Biobrennstoffe - Bestimmung des Wassergehaltes - Ofentrocknung - Teil 2:
Gesamtgehalt an Wasser - Vereinfachtes Verfahren (ISO 18134-2:2015)
Biocarburants solides - Dosage de la teneur en humidité - Méthode de séchage à l'étuve
- Partie 2: Humidité totale - Méthode simplifiée (ISO 18134-2:2015)
Ta slovenski standard je istoveten z: EN ISO 18134-2:2015
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 18134-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 27.190; 75.160.10 Supersedes EN 14774-2:2009
English Version
Solid biofuels - Determination of moisture content - Oven
dry method - Part 2: Total moisture - Simplified method
(ISO 18134-2:2015)
Biocarburants solides - Dosage de la teneur en Biogene Festbrennstoffe - Bestimmung des
humidité - Méthode de séchage à l'étuve - Partie 2: Wassergehaltes - Ofentrocknung - Teil 2: Gesamtgehalt
Humidité totale - Méthode simplifiée (ISO 18134- an Wasser - Vereinfachtes Verfahren (ISO 18134-
2:2015) 2:2015)
This European Standard was approved by CEN on 8 August 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18134-2:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 18134-2:2015) has been prepared by Technical Committee ISO/TC 238 “Solid
biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 14774-2:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18134-2:2015 has been approved by CEN as EN ISO 18134-2:2015 without any
modification.
INTERNATIONAL ISO
STANDARD 18134-2
First edition
2015-09-01
Solid biofuels — Determination
of moisture content — Oven dry
method —
Part 2:
Total moisture — Simplified method
Biocarburants solides — Dosage de la teneur en humidité — Méthode
de séchage à l’étuve —
Partie 2: Humidité totale — Méthode simplifiée
Reference number
ISO 18134-2:2015(E)
©
ISO 2015
ISO 18134-2:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 18134-2:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sample preparation . 2
6.1 Sample reduction . 2
6.2 Drying of test portion . 2
6.3 Size of test portion . 3
7 Procedure. 3
7.1 Handling of test portion . 3
7.2 Weight of test portion . 3
8 Calculation . 4
9 Performance characteristics . 4
10 Test report . 4
Bibliography . 5
ISO 18134-2:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International El
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...