iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1089-2:1996

(Main)

Transportable gas cylinders - Cylinder identification (excluding LPG) - Part 2: Precautionary labels

Transportable gas cylinders - Cylinder identification (excluding LPG) - Part 2: Precautionary labels

This European Standard specifies the design, content, i.e. hazard symbols and text, and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures.   Labels for bundles of cylinders and for LPG cylinders are not covered by this standard.

Ortsbewegliche Gasflaschen - Gasflaschen-Kennzeichnung (ausgenommen LPG) - Teil 2: Gefahrzettel

Diese Europäische Norm spezifiziert die Gestaltung, den Inhalt, wie z. B. Gefahrensymbole und Text, und die Anwendung von Warnaufklebern, zum Gebrauch auf allen Einzelgasflaschen, die Gase oder Gasgemische enthalten. Warnaufkleber für Flaschenbündel und für LPG-Flaschen fallen nicht unter diese Norm.

Bouteilles à gaz transportables - Identification de la bouteille à gaz (à l'exclusion du GPL) - Partie 2: Etiquettes informatives

La présente norme européenne spécifie la conception, le contenu, c'est-à-dire les symboles de risque et le texte, ainsi que l'exploitation des étiquettes informatives destinées à toutes les bouteilles à gaz individuelles contenant des gaz purs ou des mélanges de gaz. Les étiquettes pour cadres de bouteilles et pour bouteilles à gaz pour GPL ne sont pas couvertes par la présente norme.

Plinske jeklenke - Označevanje jeklenk (razen UNP) - 2. del: Opozorilne nalepke

General Information

Status
Withdrawn
Publication Date
22-Oct-1996
Withdrawal Date
20-Aug-2002
ICS
13.300 - Protection against dangerous goods
23.020.30 - Pressure vessels, gas cylinders
23.020.35 - Gas cylinders
Technical Committee
CEN/TC 23 - Transportable gas cylinders
Drafting Committee
CEN/TC 23 - Transportable gas cylinders
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-Aug-2002
Completion Date
21-Aug-2002
Directive
94/55/EC - Transport of dangerous goods by road
Mandate
M/BC/CEN/89/9 - Joint Standardization request to CEN/CENELEC concerning harmonized standards relating to horizontal aspects in the field of medical devices
Ref Project
SIST EN 1089-2:1999 - Transportable gas cylinders - Cylinder identification (excluding LPG) - Part 2: Precautionary labels

Relations

Replaced By
EN 1089-2:2002 - Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 2: Precautionary labels
Effective Date
22-Dec-2008

Buy Standard

EN 1089-2:1999EN 1089-2:1999
PreviousNext
Standard
EN 1089-2:1999
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsbewegliche Gasflaschen - Gasflaschen-Kennzeichnung (ausgenommen LPG) - Teil 2: GefahrzettelBouteilles a gaz transportables - Identification de la bouteille a gaz (a l'exclusion du GPL) - Partie 2: Etiquettes informativesTransportable gas cylinders - Cylinder identification (excluding LPG) - Part 2: Precautionary labels23.020.30MHNOHQNHPressure vessels, gas cylinders13.300Va
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12341:2023(Main)
Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
SIST EN 12341:2023

This European Standard describes a standard method for determining the PM10 or PM2,5 mass concentrations of suspendedparticulate matter in ambient air by sampling the particulate matter on filters and weighing them by means of a balance.
Measurements are performed with samplers with inlet designs as specified in Annex A, operating at a nominal flow rate of 2,3 m3/h,over a nominal sampling period of 24 h. Measurement results are expressed in μg/m3, where the volume of air is the volume atambient conditions near the inlet at the time of sampling.
The range of application of this European Standard is for 24 h measurements from approximately 1 μg/m3 (i.e. the limit of detection ofthe standard measurement method expressed as its uncertainty) up to 150 μg/m3 for PM10 and 120 μg/m3 for PM2,5.
This European Standard describes procedures and gives requirements for the testing and use of so-called sequential samplers,equipped with a filter changer, suitable for extended stand-alone operation. Sequential samplers are commonly used throughout theEuropean Union for the measurement of concentrations in ambient air of PM10 or PM2,5. However, this European Standard does notexclude the use of single-filter samplers.
This European Standard represents an evolution of earlier European Standards (EN 12341:1998 and 2014, EN 14907:2005). Newequipment procured shall comply fully with this European Standard.
Older versions of these samplers, including those described in EN 12341:2014 Annex B, have a special status in terms of their use. These samplers can still be used for monitoring purposes and for ongoing quality control, provided that a well justified additionalallowance is made to their uncertainties
This European Standard also provides guidance for the selection and testing of filters with the aim of reducing the measurementuncertainty of the results obtained when applying this European Standard.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 45001:2023(Main)
Occupational health and safety management systems - Requirements with guidance for use (ISO 45001:2018)
SIST EN ISO 45001:2023
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23537-2:2023(Main)
Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2023)
kSIST FprEN ISO 23537-2:2023

This document specifies the fabric and material properties as well as provisions for labelling of adult sized sleeping bags for use in sports and leisure time activities.
This document does not apply to sleeping bags intended for specific purposes such as military use and extreme climate zone expedition. It does not apply to sleeping bags for children or babies.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day