EN 1807-1:2013
(Main)Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.
Machines designed to cut wood based material may also be used to cut rigid plastic materials with similar characteristics as wood.
This European Standard does not apply to:
a) Transportable machines, i.e. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down;
NOTE 1 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2011.
b) hand held motor-operated electric tools including any adaptation permitting their use in a different mode, i.e. bench mounting;
NOTE 2 Hand-held motor-operated electric tools are covered by the requirements of EN 60745-1:2009 together with EN 60745-2-20:2009.
c) log band saws.
NOTE 3 Log sawing machines are covered by EN 1807-2.
This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment that may be fitted to the machine.
This European Standard is not applicable to machines manufactured before the date of its publication as EN.
NOTE 4 Machines covered by this document are listed under 4 of Annex IV of the Machinery Directive.
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und Trennbandsägemaschinen
Diese Europäische Norm behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Ereignisse, die auf stationäre und verschiebbare Tischbandsägemaschinen und Trennbandsägemaschinen mit Handbeschickung und/oder Handabnahme, auch wenn sie angebaut an und angetrieben durch einen Traktor sind, zutreffen - im Folgenden als "Maschinen" bezeichnet -, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten und/oder mit Kunststoff/Leichtmetall-Legierung beschichtet sind, wenn sie bestimmungsgemäß und entsprechend den durch den Hersteller vorher¬sehbaren Bedingungen einschließlich vernünftigerweise vorhersehbarer Fehlanwendung verwendet werden.
Maschinen, die zum Sägen von Holzaustauschstoffen konstruiert sind, können auch zum Sägen von Hartkunststoffen mit ähnlichen Eigenschaften wie Holz verwendet werden.
Diese Europäische Norm gilt nicht für:
a) transportable Maschinen, d. h. Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist, aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die von Hand von einer Person angehoben werden können; das Gestell kann auch ein fester Bestandteil der Maschine sein, wenn es aus scharnierbefestigten Füßen besteht, die heruntergeklappt werden können;
ANMERKUNG 1 Transportable, elektrisch angetriebene Maschinen sind durch die Anforderungen in EN 61029 1:2009 zusammen mit EN 61029-2-5:2011 erfasst.
b) handgeführte motorbetriebene Elektrowerkzeuge einschließlich irgendwelcher Einrichtungen, die ihre Verwendung in einer anderen Weise, d. h. in einem Gestell montiert, ermöglichen;
ANMERKUNG 2 Handgeführte motorbetriebene Elektrowerkzeuge sind durch die Anforderungen in EN 60745 1:2009 zusammen mit EN 60745-2-20:2009 erfasst.
c) Blockbandsägemaschinen.
ANMERKUNG 3 Blockbandsägemaschinen sind in FprEN 1807-2:2012 erfasst.
Diese Europäische Norm behandelt nicht die spezifischen Gefährdungen im Zusammenhang mit einer Wärmekraftmaschine und einem Zapfwellenantrieb (PTO), mit denen die Maschine ausgerüstet sein kann.
Diese Europäische Norm gilt nicht für Maschinen, die vor dem Datum seiner Veröffentlichung als EN hergestellt wurden.
ANMERKUNG 4 Die von diesem Dokument erfassten Maschinen sind in 4 des Anhangs IV der Maschinenrichtlinie aufgeführt.
Sécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1: Scies à table et scies à refendre
La présente Norme européenne traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu’énumérés à l’Article 4, applicables aux scies à table et scies à refendre fixes ou transportables à chargement et/ou déchargement manuels, également lorsqu’elles sont montées sur et alimentées par un tracteur motorisé, ci-après désignées "machines", conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliages légers stratifiés, lorsqu’elles sont utilisées normalement et dans les conditions prévues par le fabricant, y compris une mauvaise utilisation raisonnablement prévisible.
Les machines conçues pour couper un matériau à base de bois peuvent également être utilisées pour couper les matières plastiques rigides avec des caractéristiques similaires à celles du bois.
La présente Norme européenne n'est pas applicable aux :
a) machines transportables, c'est-à-dire aux machines installées sur un établi ou une table similaire à un établi, destinées à exécuter des travaux dans une position fixe et pouvant être soulevées à la main par une seule personne ; l'établi peut également être une pièce intégrée à la machine s'il consiste en pieds articulés qui peuvent être dépliés ;
NOTE 1 Les machines transportables à entraînement électrique sont couvertes par les prescriptions de l’EN 61029 1:2009 conjointement avec l’EN 61029-2-5:2011.
b) outils électroportatifs à moteur, y compris toute adaptation permettant leur utilisation de manière différente, c'est-à-dire fixés sur un établi ;
NOTE 2 Les outils électroportatifs à moteur sont couverts par les prescriptions de l'EN 60745-1:2009 conjointement avec l’EN 60745-2-20:2009.
c) scies à ruban à grumes.
NOTE 3 Les scies à ruban à grumes sont couvertes par le FprEN 1807-2:2012.
La présente Norme Européenne ne traite pas des phénomènes dangereux spécifiques relatifs à un moteur thermique et à un équipement de PTO qui peuvent être montés sur la machine.
La présente Norme européenne n’est pas applicable aux machines qui ont été fabriquées avant sa date de publication comme EN.
NOTE 4 Les machines couvertes par le présent document sont énumérées dans la Directive "Machines", Annexe IV, 4.
Varnost lesnoobdelovalnih strojev - Tračne žage - 1. del: Namizne tračne žage in žage za rezanje desk
Ta evropski standard obravnava vsa večja tveganja, nevarne razmere in dogodke iz točke 4, ki se nanašajo na stacionarne in premostljive ročne namizne tračne žage in žage za rezanje desk, tudi ko so nameščene na lokomotor in se iz njega napajajo, v nadaljnjem besedilu »stroji«, ki so namenjene za rezanje polnega lesa, ivernih plošč, vlaknenih plošč, vezanih plošč in tudi teh materialov, če so prekriti s plastičnimi robovi in/ali laminatom iz plastike/lahkih zlitin, kadar se uporabljajo v skladu z namembnostjo in pod pogoji, ki jih predvidi proizvajalec, vključno z razumno predvideno nepravilno uporabo. Stroji, namenjeni rezanju materialov na osnovi lesa, se lahko uporabljajo tudi za rezanje trdih plastičnih materialov s podobnimi lastnostmi kot les. Ta evropski standard se ne uporablja za:
a) prenosne stroje, tj. stroje na delovni mizi ali mizi, podobni delovni mizi, ki so namenjeni delovanju v stacionarnem položaju in jih lahko ročno dvigne ena oseba; delovna miza je lahko tudi sestavni del stroja, če sestoji iz zgibnih nog, ki jih je mogoče podaljšati navzdol;
OPOMBA 1: Premični električni stroji so obravnavani v zahtevah standarda EN 61029-1:2009 skupaj s standardom EN 61029-2-5:2011.
b) ročne motorne električne stroje, vključno s kakršno koli prilagoditvijo, ki omogoča uporabo na drugačen način, tj. namestitev na delovno mizo;
OPOMBA 2: Premični motorni električni stroji so obravnavani v zahtevah standarda EN 60745-1:2009 skupaj s standardom EN 60745-2-20:2009.
c) žage samice venecijanke.
OPOMBA 3: Žage samice venecijanke so obravnavane v standardu FprEN 1807-2:2012.
V tem evropskem standardu niso obravnavane specifične nevarnosti v zvezi s toplotnim motorjem in opremo priključne gredi, ki se lahko namesti na stroj. Ta evropski standard ne velja za stroje, ki so bili izdelani, preden je bil objavljen kot standard EN.
OPOMBA 4: Stroji, obravnavani v tem dokumentu, so navedeni v točki 4 Priloge IV k direktivi o strojih.
General Information
- Status
- Withdrawn
- Publication Date
- 26-Mar-2013
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 142 - Woodworking machines - Safety
- Drafting Committee
- CEN/TC 142/WG 14 - Safety of manually fed machines
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Nov-2021
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 24-Nov-2021
Frequently Asked Questions
EN 1807-1:2013 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws". This standard covers: This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines designed to cut wood based material may also be used to cut rigid plastic materials with similar characteristics as wood. This European Standard does not apply to: a) Transportable machines, i.e. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; NOTE 1 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2011. b) hand held motor-operated electric tools including any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 2 Hand-held motor-operated electric tools are covered by the requirements of EN 60745-1:2009 together with EN 60745-2-20:2009. c) log band saws. NOTE 3 Log sawing machines are covered by EN 1807-2. This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment that may be fitted to the machine. This European Standard is not applicable to machines manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under 4 of Annex IV of the Machinery Directive.
This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines designed to cut wood based material may also be used to cut rigid plastic materials with similar characteristics as wood. This European Standard does not apply to: a) Transportable machines, i.e. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; NOTE 1 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2011. b) hand held motor-operated electric tools including any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 2 Hand-held motor-operated electric tools are covered by the requirements of EN 60745-1:2009 together with EN 60745-2-20:2009. c) log band saws. NOTE 3 Log sawing machines are covered by EN 1807-2. This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment that may be fitted to the machine. This European Standard is not applicable to machines manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under 4 of Annex IV of the Machinery Directive.
EN 1807-1:2013 is classified under the following ICS (International Classification for Standards) categories: 79.120.10 - Woodworking machines. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1807-1:2013 has the following relationships with other standards: It is inter standard links to EN 1807:1999+A1:2009, EN ISO 19085-16:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1807-1:2013 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1807-1:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und TrennbandsägemaschinenSécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1 : Scies à table et scies à refendreSafety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1807-1:2013SIST EN 1807-1:2013en,fr,de01-junij-2013SIST EN 1807-1:2013SLOVENSKI
STANDARDSIST EN 1807:2000+A1:2009oSIST prEN 1807-1:20091DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1807-1
March 2013 ICS 79.120.10 Supersedes EN 1807:1999+A1:2009English Version
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
Sécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1: Scies à table et scies à refendre
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und Trennbandsägemaschinen This European Standard was approved by CEN on 13 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1807-1:2013: ESIST EN 1807-1:2013
Test for adjustable guard over cutting area of saw blade . 58 Annex B (normative)
Operating conditions for noise emission measurement . 60 Annex C (normative)
Stability test . 61 Annex D (normative)
Impact test method for guards . 62 D.1 General . 62 D.2 Test method . 62 D.2.1 Preliminary remarks . 62 D.2.2 Testing equipment . 62 D.2.3 Projectile for guards . 62 D.2.4 Sampling. 62 D.2.5 Test procedure . 62 D.3 Results . 63 D.4 Assessment . 63 D.5 Test report . 63 D.6 Test equipment for impact test . 63 Annex E (normative)
Braking tests . 65 E.1 Conditions for all tests . 65 E.2 Tests . 65 E.2.1 Unbraked run-down time . 65 E.2.2 Run-up time . 65 E.2.3 Braked run-down time . 65 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 67 Bibliography . 70
2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 614-1:2006+A1:2009, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 894-1:1997+A1:2008, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays EN 894-3:2000+A1:2008, Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators SIST EN 1807-1:2013
(IEC 60825-1:2007) EN 61310-1:2008, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007) CLC/TS 61496-2:2006, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006) EN 61800-5-2:2007, Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional (IEC 61800-5-2:2007) EN ISO 3743-1:2010, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:2010)
1) This document is impacted by the stand-alone amendment EN 60439-1:1999/A1:2004, Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999/A1:2004). 2) This document is impacted by the stand-alone amendment EN 60529:1991/A1:2000, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989/A1:2000). SIST EN 1807-1:2013
re-sawing Note 1 to entry: See Figures 1, 3 and 4. 3.1.3 band re-saw band sawing machine with integrated feed used for secondary conversion of solid wood
Note 1 to entry: See Figures 2, 5 and 6. 3.1.4 saw blade straining force exerted on the saw blade to keep it in position on the band wheels during cutting
Note 1 to entry: See Figure 10. 3.1.5 saw blade tensioning process used to form the cross-section of the saw blade, either by rolling or hammering, in order to ensure that the front and back edges of the saw blade grip the band wheels 3.1.6 saw blade tracking means used to maintain the position of the saw blade on the band wheels
Note 1 to entry: See Figure 11. 3.1.7 manual control situation where each process movement is initiated by the operator 3.1.8 machine actuator power mechanism used to effect motion of the machine 3.1.9 hand feed manual holding and/or guiding of the workpiece which includes the use of a hand operated carriage on which the workpiece is placed manually or clamped and the use of a demountable power feed unit SIST EN 1807-1:2013
area where the saw blade is not involved in the cutting process 3.1.18 stationary machine
machine designed to be located on or fixed to the floor or other parts of the structure of the premises and to be stationary during use 3.1.19 displaceable machine machine which is located on the floor, stationary during use and equipped with a device, normally wheels, which allows it to be moved between locations 3.1.20 PTO-driven machine displaceable machine designed to be mounted to a moveable work machine, e.g. tractor, and which is powered by PTO 3.1.21 information of the supplier statements, sales literature, leaflets or other documents, where the manufacturer (or supplier) declares either the characteristics or the compliance of the material or product to a relevant standard SIST EN 1807-1:2013
[SOURCE: EN ISO 12100:2010, 3.30] 3.1.23 safety-related part of a control system
SRP/CS part of a control system that responds to safety-related input signals and generates safety-related output signals
[SOURCE: EN ISO 13849-1:2008, 3.1.1] 3.1.24 embedded software
SRESW firmware system software software that is part of the system supplied by the control manufacturer and which is not accessible for modification by the user of the machinery
[SOURCE: EN ISO 13849-1:2008, 3.1.37] Note 1 to entry: Firmware or system software are synonymous with embedded software. Note 2 to entry: Manufacturer means manufacturer of the system. Note 3 to entry: For example the operating system of a speed monitoring device. 3.1.25 application software
SRASW software specific to the application, implemented by the machine manufacturer, and generally containing logic sequences, limits and expressions that control the appropriate inputs, outputs, calculations and decisions necessary to meet the SRP/CS requirements
[SOURCE: EN ISO 13849-1:2008, 3.1.36] 3.1.26 irregular shaped workpiece workpiece with no even surface for stable guiding on the saw table, e.g. firewood 3.1.27 performance level PL discrete level used to specify the ability of safety-related parts of control systems to perform a safety function under foreseeable conditions [SOURCE: EN ISO 13849-1:2008, 3.1.23] 3.2 Terminology The names of the main parts of the machines are shown in Figures 1 to 6 and Tables 1 and 2. SIST EN 1807-1:2013
Figure 1 — Example of hand fed table band saw Table 1 — Terminology for table band saw 1 Table 2 Adjustable fence 3 Band saw blade 4 Top band wheel 5 Bottom band wheel 6 Start and stop controls 7 Band wheel guard 8 Adjustable guard for saw blade SIST EN 1807-1:2013
Figure 2 — Example of band re-saw Table 2 — Terminology for band re-saw 1 Feed roller 2 Workpiece support (table) 3 Infeed table roller 4 guard below the table 5 Band wheel guard 6 Adjustable guard for saw blade 7 Start and stop controls
Figure 3 — Example of hand fed table band saw with three band wheels
Figure 4 — Example of hand fed table band saw (tilting saw unit) SIST EN 1807-1:2013
Figure 5 — Example of twin opposed band re-saws SIST EN 1807-1:2013
Figure 6 — Example of twin band re-saws in tandem 4 List of significant hazards This clause contains all significant hazards, hazardous situations and events (see EN ISO 12100:2010), identified by risk assessment as significant for the machines as defined in the scope and which require action to eliminate or reduce the risk. This document deals with these significant hazards by defining safety requirements and/or measures or by reference to relevant standards. These hazards are listed in Table 3. SIST EN 1807-1:2013
5.2.3, 5.2.4, 5.2.5, 5.2.7, 5.2.8, 5.2.9, 5.3.4, 5.3.6, 5.3.7, 5.3.8, 5.4.14, 6.3 1.2 Shearing hazard 1.3 Cutting or severing hazard 1.4 Entanglement hazard 1.5 Drawing-in or trapping hazard 1.6 Impact hazard 5.2.3, 5.2.4, 5.2.5, 5.2.7, 5.2.8, 5.2.9, 5.3.4, 5.3.6, 5.3.7, 5.4.14, 6.3 1.8 Friction or abrasion hazard 5.2.3, 5.2.4, 5.2.7, 5.2.9, 5.3.4,
5.3.7, 5.3.8, 5.4.14, 6.3 SIST EN 1807-1:2013
6.3 6 Hazards generated by radiation 6.5 Lasers 6.3.4.5 5.4.10, 6.3 7 Hazards generated by materials and substances (and their constituent elements) processed or used by the machinery 7.1 Hazards from contact with or inhalation of harmful fluids and dusts 6.2.3, 6.2.4
5.4.3, 6.3 7.2 Fire hazard 6.2.4
5.4.1 8 Hazards generated by neglecting ergonomic principles in machinery design related to: 8.1 Unhealthy postures or excessive effort 6.2.7, 6.2.8, 6.2.11.12, 6.3.5.5, 6.3.5.6 5.2.2, 5.4.5 8.2 Hand-arm or foot-leg anatomy 6.2.8.3 5.4.5 8.4 Local lighting 6.2.8.6 6.3 8.5 Mental overload and underload, stress 6.2.8.5 6.3 8.6 Human error, human behaviour 6.2.8, 6.2.11.8, 6.2.11.10, 6.3.5.2, 6.4 6.3 8.7 Design, location or identification of manual controls 6.2.8.f, 6.2.11.8 5.2.2, 5.4.5 8.8 Design or location of visual display units 6.2.8, 6.4.2 5.2.2, 5.4.5 SIST EN 1807-1:2013
5.2.9, 5.4.6, 5.4.7 9.3 External influences on electrical equipment 6.2.11.11 5.4.9 9.5 Errors in the software 6.2.11.7 5.2.1 9.6 Errors made by the operator (due to mismatch of machinery with human characteristics and abilities, see 8.6) 6.2.8, 6.2.11.8, 6.2.11.10, 6.3.5.2, 6.4 5.4.5, 6.3 10 Impossibility of stopping the machine in the best possible conditions 6.2.11.1, 6.2.11.3, 6.3.5.2
5.2.4, 5.2.5, 5.2.7, 5.4.13 11 Variations in the rotational speed of tools 6.2.2.2, 6.2.3 5.2.8 12 Failure of the power supply 6.2.11.1, 6.2.11.4 5.2.10 13 Failure of the control circuit 6.2.11, 6.3.5.4
5.2.11 14 Errors of fitting 6.2.7, 6.4.5 5.4.12 15 Break-up during operation 6.2.3 5.3.2 16 Falling or ejected objects or fluids 6.2.3, 6.2.10
5.3.2, 5.3.3, 5.3.5, Annex D 17 Loss of stability / overturning of machinery 6.3.2.6
5.3.1, Annex C
5 Safety requirements and/or measures 5.1 General The machine shall comply with the safety requirements and/or protective measures of Clause 5. In addition, the machine should be designed according to the principles of EN ISO 12100:2010 for hazards relevant but not significant, which are not dealt with by this document (e.g. sharp edges of the machine frame). For guidance in connection with risk reduction by design, see 6.2 of EN ISO 12100:2010, and for safeguarding measures, see 6.3 of EN ISO 12100:2010. SIST EN 1807-1:2013
a) on the infeed side; b) between 600 mm and 1 800 mm above the floor level; and c) either on a fixed part of the machine or on a moveable control panel or a free-standing control console. Verification : By checking the relevant drawings and/or circuit diagrams, measurement, visual inspection of the machine and relevant functional testing of the machine.
5.2.2.2 Re-saws On re-saws, all control devices for the normal operation of the machine, except the emergency stop control, shall be positioned in accordance with 5.2.2.1. An emergency stop control shall be positioned at any infeed and outfeed position and on any fixed or moveable control panel. Verification : By checking the relevant drawings and/or circuit diagrams, measurement, visual inspection of the machine and relevant functional testing of the machine. 5.2.3 Starting Before starting or restarting the machine all interlocked guards (where fitted as indicated in 5.3.7) shall be in place and functional. This is achieved by the interlocking arrangements described in 5.3.7. For non interlocked guards provisions before starting see 6.3, list entry d), sub-entry 6). Start or restart shall only be possible by actuation of the start control device provided for that purpose. For electrically operated machines the requirements of 9.2.5.2 of EN 60204-1:2006 apply but the exceptions described in 9.2.5.2 of EN 60204-1:2006 are not relevant. If fitted, the integrated feed or the demountable power-feed unit shall not be capable to start before the band saw: a) is running, and
b) has reached its intended cutting speed if the design run-up time is higher than 10s.
The safety related part of the control systems (also see 5.2.1) for starting and the interlocking arrangements as indicated in 5.3.7 shall be at least PL = c in accordance with the requirements of EN ISO 13849-1:2008
Closure of movable interlocked guards shall not lead to an automatic restart of hazardous movements. Verification: By checking the relevant drawings and/or circuit diagrams, inspection of the machine and relevant functional testing of the machine. SIST EN 1807-1:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...