EN 12053:2001+A1:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost vozil za talni transport - Preskusne metode za merjenje emisije hrupaSicherheit von Flurförderungzeugen - Verfahren für die Messung der GeräuschemissionSécurité des chariots de manutention - Méthodes d'essai pour le mesurage des émissions de bruitSafety of industrial trucks - Test methods for measuring noise emissions53.060Industrijski tovornjakiIndustrial trucks17.140.30Emisija hrupa transportnih sredstevNoise emitted by means of transportICS:Ta slovenski standard je istoveten z:EN 12053:2001+A1:2008SIST EN 12053:2002+A1:2008en,fr01-december-2008SIST EN 12053:2002+A1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12053:2001+A1
July 2008 ICS 17.140.30; 53.060 Supersedes EN 12053:2001 English Version
Safety of industrial trucks - Test methods for measuring noise emissions
Sécurité des chariots de manutention - Méthodes d'essai pour le mesurage des émissions de bruit
Sicherheit von Flurförderungzeugen - Verfahren für die Messung der Geräuschemission This European Standard was approved by CEN on 19 February 2001 and includes Corrigendum 1 issued by CEN on 24 July 2002 and Amendment 1 approved by CEN on 15 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12053:2001+A1:2008: ESIST EN 12053:2002+A1:2008

!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC".19 SIST EN 12053:2002+A1:2008

!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC".20
This document (EN 12053:2001+A1:2008) has been prepared by Technical Committee CEN/TC 150 "Industrial Trucks - Safety", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2009, and conflicting national standards shall be withdrawn at the latest by January 2009.
This document includes Amendment 1, approved by CEN on 2008-06-15. This document supersedes EN 12053:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". The modifications of the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags ˜ ™ This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
!For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document."
!The determination of noise emission values is a prerequisite for a manufacturer to assess the noise reduction obtained at the design stage."
This European Standard is one of a series of European Standards for the safety of Industrial trucks.
EN 1175-1:1998 Safety of Industrial trucks - Electrical requirements - Part 1: General requirements for battery-powered trucks
EN 1175-2:1998 Safety of Industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
EN 1175-3:1998 Safety of Industrial trucks - Electrical requirements - Part 3: Specific requirements for electrical power transmission systems of internal combustion engine powered trucks
EN 1459:1998 Safety of Industrial trucks - Self propelled variable reach trucks
EN 1525:1997 Safety of Industrial trucks - Driverless industrial trucks and their systems
EN 1526:1997 Safety of Industrial trucks - Additional requirements for automated functions for industrial trucks
EN 1551:2000 Safety of Industrial trucks - Self propelled trucks over 10 000kg capacity
EN 1726-1:1998 Safety of industrial trucks - Self propelled trucks up to and including 10 000kg capacity and industrial tractors with a drawbar pull up to and including 20 000N Part 1: General requirements
- with a drawbar pull up to and including 20 000N Part 2: Additional requirements for trucks with elevating operator position and/or trucks especially designed to travel with elevated loads
EN 1755:2000 Safety of Industrial trucks - Operation in potentially explosive atmospheres; Use in flammable gas, vapour, mist and dust
EN 1757-1: 2001 Safety of Industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks
EN 1757-2:2001 Safety of Industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks
prEN 1757-3:1997 Safety of Industrial trucks - Pedestrian propelled trucks - Part 3: Platform trucks
prEN 1757-4:1997 Safety of Industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet trucks
EN 12895:2000 Safety of Industrial trucks - Electromagnetic compatibility
EN 12053:2001 Safety of Industrial trucks - Test methods for measuring noise emissions
prEN 13059:1997 Safety of Industrial trucks - Test methods for measuring vibration
prEN ISO 13564:1996 Safety of Industrial trucks - Test methods for measuring visibility from self propelled trucks (ISO/DIS 13564:1996)
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 12053:2002+A1:2008

This European Standard is a type C standard as defined in EN 292-1.
This standard has been prepared to be a harmonized standard to provide one means of conforming to the essential safety requirements of the Machinery Directive and associated EFTA regulations. The extent to which hazards are covered is indicated in the scope of this standard.
In addition, industrial trucks should comply as appropriate with EN 292-1 for hazards which are not covered by this standard. General standards for the determination of the noise emissions at the operator's position and of the sound power levels of machines already exist. However and because of specific applications these existi
...