EN 626-1:1994+A1:2008
(Main)Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
This European Standard deals with principles for the control of risks to health due to hazardous substances
from machinery. This European Standard is not applicable to hazardous substances which are a hazard to
health solely because of explosive, flammable, high or low temperature, high or low pressure or radioactive
properties.
Sicherheit von Maschinen - Reduzierung des Gesundheitsrisikos durch Gefahrstoffe, die von Maschinen ausgehen - Teil 1: Grundsätze und Festlegungen für Maschinenhersteller
Diese Europäische Norm behandelt Grundlagen für die Überwachung von Gesundheitsrisiken, die durch
Gefahrstoffe, die von der Maschine ausgehen, auftreten. Diese Europäische Norm schließt keine Gefahrstoffe
ein, die ausschließlich aufgrund von explosiven und entzündlichen Eigenschaften, hoher oder niedriger
Temperatur, hohem oder niedrigem Druck oder ihrer Radioaktivität eine Gefahr für die Gesundheit darstellen.
Sécurité des machines - Réduction des risques pour la santé resultant de substances dangereuses émises par des machines - Partie 1 : Principes et specifications à l'intention des constructeurs de machines
Cette norme européenne traite des principes de maîtrise des risques pour la santé causés par les substances
dangereuses émises par des machines. La norme ne couvre pas les substances constituant un danger pour la santé
du seul fait de leur caractère explosif, inflammable, radioactif ou de leurs conditions de température (haute ou basse)
ou de pression (haute ou basse).
Varnost strojev - Zmanjšanje tveganja za zdravje pred nevarnimi snovmi, ki jih oddajajo stroji - 1. del: Načela in specifikacije za proizvajalce strojev
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 626-1:1995+A1:2008
01-oktober-2008
9DUQRVWVWURMHY=PDQMãDQMHWYHJDQMD]D]GUDYMHSUHGQHYDUQLPLVQRYPLNLMLK
RGGDMDMRVWURMLGHO1DþHODLQVSHFLILNDFLMH]DSURL]YDMDOFHVWURMHY
Safety of machinery - Reduction of risks to health from hazardous substances emitted by
machinery - Part 1: Principles and specifications for machinery manufacturers
Sicherheit von Maschinen - Reduzierung des Gesundheitsrisikos durch Gefahrstoffe, die
von Maschinen ausgehen - Teil 1: Grundsätze und Festlegungen für Maschinenhersteller
Sécurité des machines - Réduction des risques pour la santé resultant de substances
dangereuses émises par des machines - Partie 1 : Principes et specifications à l'intention
des constructeurs de machines
Ta slovenski standard je istoveten z: EN 626-1:1994+A1:2008
ICS:
13.110 Varnost strojev Safety of machinery
SIST EN 626-1:1995+A1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 626-1:1995+A1:2008
---------------------- Page: 2 ----------------------
SIST EN 626-1:1995+A1:2008
EUROPEAN STANDARD
EN 626-1:1994+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 13.110 Supersedes EN 626-1:1994
English Version
Safety of machinery - Reduction of risks to health from
hazardous substances emitted by machinery - Part 1: Principles
and specifications for machinery manufacturers
Sécurité des machines - Réduction des risques pour la Sicherheit von Maschinen - Reduzierung des
santé résultant de substances dangereuses émises par des Gesundheitsrisikos durch Gefahrstoffe, die von Maschinen
machines - Partie 1 : Principes et spécifications à l'intention ausgehen - Teil 1: Grundsätze und Festlegungen für
des constructeurs de machines Maschinenhersteller
This European Standard was approved by CEN on 6 September 1994 and includes Amendment 1 approved by CEN on 18 May 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 626-1:1994+A1:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 626-1:1995+A1:2008
EN 626-1:1994+A1:2008 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .4
2 Normative references .4
3 Definitions .5
4 Risk assessment.5
5 Types of emissions.7
6 Requirements and/or measures for elimination and/or reduction of risk.9
7 Information for use and maintenance.10
8 Verification of the safety requirements and/or measures .10
Annex A (informative) Examples of meas
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.