EN 1096-1:2012
(Main)Glass in building - Coated glass - Part 1: Definitions and classification
Glass in building - Coated glass - Part 1: Definitions and classification
This European Standard defines the characteristics, properties and classification of coated glass for use in building.
Test methods and procedures used to establish durability are in Parts 2 and 3 of this standard.
Factory production control and evaluation of conformity, including Annex ZA, are in Part 4 of this standard.
Test methods for determination of self cleaning performances of coated glass are in Part 5.
This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.
This standard is not applicable to:
adhesive backed polymeric films on glass (prEN 15755-1);
mirrors made from silvered float glass (EN 1036-1);
enamelled glass (EN 12150-1).
Glas im Bauwesen - Beschichtetes Glas - Teil 1: Definitionen und Klasseneinteilung
Diese Europäische Norm legt die Merkmale, Eigenschaften und Klasseneinteilung für beschichtetes Glas für das Bauwesen fest.
In Teil 2 und Teil 3 dieser Norm sind Prüfverfahren und Verfahrensweisen zur Bestimmung der Haltbarkeit behandelt.
Informationen zur werkseigenen Produktionskontrolle und Konformitätsbewertung, einschließlich Anhang ZA, sind in Teil 4 dieser Norm enthalten.
Teil 5 umfasst Prüfverfahren zur Bestimmung von Selbstreinigungseigenschaften von beschichtetem Glas.
Diese Norm gilt für beschichtetes Glas für Verglasungen in üblichen Wohnhäusern oder kommerziell genutzten Gebäuden.
Diese Norm ist nicht anwendbar für:
- Gläser mit selbstklebender Polymerfolie (prEN 15755-1),
- Spiegel aus silberbeschichtetem Floatglas (EN 1036-1),
- emailliertes Glas (EN 12150-1, EN 1863-1, EN 14179-1);
- lackiertes Glas (Norm in Erarbeitung).
Verre dans la construction - Verre à couche - Partie 1: Définitions et classification
La présente Norme européenne définit les caractéristiques, les propriétés et la classification du verre à couche employé dans le bâtiment.
Les méthodes d’essai et les modes opératoires utilisés pour déterminer la durabilité sont repris dans les Parties 2 et 3 de la présente norme.
Le contrôle de la production en usine et l’évaluation de la conformité, y compris l’Annexe ZA, sont traités dans la Partie 4 de la présente norme.
Les méthodes d’essai permettant de déterminer les performances autonettoyantes des verres à couche sont spécifiées dans la Partie 5.
La présente norme s’applique au verre à couche utilisé pour vitrer des locaux domestiques ou commerciaux occupés de manière normale.
La présente norme ne s’applique pas :
- au verre recouvert d’un film polymère adhésif (prEN 15755-1) ;
- aux miroirs en glace argentée (EN 1036-1) ;
- au verre émaillé (EN 12150-1, EN 1863-1, EN 14179-1) ;
- au verre laqué (norme en développement).
Steklo v gradbeništvu - Steklo z nanosi - 1. del: Definicije in klasifikacija
Ta evropski standard določa značilnosti, lastnosti in klasifikacijo stekla z nanosi, ki se uporablja v gradbeništvu. Preskusne metode in postopki, ki se uporabljajo za ugotavljanje trajnosti, so opisani v 2. in 3. delu tega standarda. Kontrola proizvodnje v obratu in vrednotenje skladnosti, vključno z dodatkom ZA, sta zajeta v 4. delu tega standarda. Preskusne metode za ugotavljanje samočistilnih lastnosti stekla z nanosi so zajete v 5. delu. Ta standard se nanaša na steklo z nanosi za zasteklitev, ki se uporablja v običajno zasedenih stanovanjskih ali poslovnih objektih.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - Steklo z nanosi - 1. del: Definicije in klasifikacijaGlas im Bauwesen - Beschichtetes Glas - Teil 1: Definitionen und KlasseneinteilungVerre dans la construction - Verre à couche - Partie 1: Définitions et classificationGlass in building - Coated glass - Part 1: Definitions and classification81.040.20Steklo v gradbeništvuGlass in building01.040.81Glass and ceramics industries (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 1096-1:2012SIST EN 1096-1:2012en,fr,de01-april-2012SIST EN 1096-1:2012SLOVENSKI
STANDARDSIST EN 1096-1:19991DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1096-1
January 2012 ICS 01.040.81; 81.040.20 Supersedes EN 1096-1:1998English Version
Glass in building - Coated glass - Part 1: Definitions and classification
Verre dans la construction - Verre à couche - Partie 1: Définitions et classification
Glas im Bauwesen - Beschichtetes Glas - Teil 1: Definitionen und Klasseneinteilung This European Standard was approved by CEN on 3 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1096-1:2012: ESIST EN 1096-1:2012
Example of presentation of coated glass properties . 18Bibliography . 19 SIST EN 1096-1:2012
Part 3: Requirements and test methods for C and D coatings Part 4: Evaluation of conformity/Product standard Part 5: Test method and classification for the self-cleaning performances of coated glass surfaces The main changes compared to the previous edition are:
reference to the future EN 1096-5: Test method and classification for the Self-cleaning performances of coated glass surfaces;
Clause 3, Terms and definitions, and Clause 5, Glass substrates, were reorganised and completed;
addition of a definition of shading coefficient (6.3); the wavelengths defining the thermal range were corrected according to EN 12898; the identity card is moved to an informative annex. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
(ISO 12543-3) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 410:2011, EN 673:2011 and EN 12898:2001 and the following apply. NOTE For the purposes of these definitions, the term thermally toughened also applies to heat soaked thermally toughened. 3.1 Product definition 3.1.1 coated glass glass substrate, as defined in 3.1.2, to which has been applied a coating, as defined in 3.1.3, in order to modify one or more of its properties NOTE The properties modified could be one and/or more of the following: SIST EN 1096-1:2012
3.1.2 glass substrate basic glass, special basic glass, chemically strengthened basic glass, thermally treated basic and special basic glass, laminated glass or laminated safety glass (see Clause 4) 3.1.3 coating one or more thin solid layers of inorganic materials applied on to the surface of a glass substrate by various methods of deposition 3.1.4 on-line coating treatment of the surface of a moving continuous ribbon of a basic glass, at a stage during its manufacture, before it is cut 3.1.5 off-line coating application of a coating to individual pieces of glass within a manufacturer's or processor's premises 3.1.6 additive methods of deposition:
single or multilayer systems (consisting of metals, oxides, nitrides, fluorides, diamond like carbon or other compounds) added to the surface of the glass by different methods 3.1.7 coated annealed glass coated glass which has an annealed glass substrate 3.1.8 coated toughened or heat strengthened glass coated glass which has a thermally toughened or heat strengthened glass substrate 3.1.9 thermally treated coated glass coated glass that is thermally toughened or heat strengthened 3.1.10 coated glass - to be toughened or to be heat strengthened coated glass which has to be thermally toughened or heat strengthened to meet its final spectrophotometric properties
3.1.11 toughenable or heat strengthenable coated glass coated glass which can be thermally toughened or heat strengthened while keeping its final spectrophotometric properties
v) fraction of the incident light that is transmitted by the coated glass 3.2.5 nominal colour in reflection of coated side colour of the glass observed from the coated side 3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...