Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture (ISO/IEC 80079-34:2018)

ISO/IEC 80079-34:2018 specifies particular requirements and information for establishing and maintaining a quality management system to manufacture Ex Products in accordance with the certificates. While it does not preclude the use of other quality management systems that are compatible with the objectives of ISO 9001:2015 and which provide equivalent results, the minimum requirements are given in this document.
This second edition cancels and replaces the first edition, published in 2011, and constitutes a full technical revision. The significant changes with respect to the previous edition should be considered as minor technical revisions. However, the clause numbering in regard to the previous edition has changed in order to be in line with ISO 9001:2015. The normal “Table of Significant Changes” has not been included for this reason.
This publication is published as a double logo standard. This standard should be read in conjunction with ISO 9001:2015

Explosionsgefährdete Bereiche - Teil 34: Anwendung von Qualitätsmanagementsystemen für die Herstellung von Ex-Produkten (ISO/IEC 80079-34:2018)

Dieses Dokument legt besondere Anforderungen an und Angaben für die Verwirklichung und Aufrechterhaltung von Qualitätsmanagementsystemen zur Herstellung von Ex Produkten in Übereinstimmung mit dem Zertifikat fest. Obwohl die Anwendung von anderen Qualitätsmanagementsystemen, die mit den Zielsetzungen der ISO 9001:2015 übereinstimmen und zu gleichwertigen Ergebnissen führen, nicht ausgeschlossen wird, werden die Mindestanforderungen in diesem Dokument angegeben.

Atmosphères explosives - Partie 34: Application de systèmes de management de la qualité pour la fabrication des produits Ex (ISO/CEI 80079-34:2018)

ISO/IEC 80079-34:2018 spécifie des exigences particulières et des informations destinées à établir et à maintenir un système de management de la qualité afin de fabriquer des produits Ex, conformément aux certificats existants. Même s’il n'est pas incompatible avec l'utilisation d'autres systèmes de management de la qualité conciliables avec les objectifs de l'ISO 9001:2015 et donnant des résultats équivalents, le présent document indique les exigences minimales.
Cette deuxième édition annule et remplace la première édition, parue en 2011. Cette édition constitue une révision technique complète.
Il convient de considérer que les modifications importantes apportées à l’édition précédente donnent lieu à une révision technique mineure. Toutefois, la numérotation des articles a été modifiée par rapport à l’édition précédente afin d’être conforme à l’ISO 9001:2015. C’est la raison pour laquelle, l’habituel « Tableau des modifications majeures » n’est pas inclus.
Cette publication est publiée en tant que norme à double logo. Il convient d’utiliser la présente norme conjointement avec l'ISO 9001:2015.

Eksplozivne atmosfere - 34. del: Uporaba sistemov kakovosti za izdelavo opreme (ISO/IEC 80079-34:2018)

General Information

Status
Published
Publication Date
24-Mar-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Mar-2020
Completion Date
25-Mar-2020

Buy Standard

Standard
EN ISO/IEC 80079-34:2020
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO/IEC 80079-34:2017
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO/IEC 80079-34:2020
01-junij-2020
Nadomešča:
SIST EN ISO/IEC 80079-34:2011
Eksplozivne atmosfere - 34. del: Uporaba sistemov kakovosti za izdelavo opreme
(ISO/IEC 80079-34:2018)
Explosive atmospheres - Part 34: Application of quality systems for equipment
manufacture (ISO/IEC 80079-34:2018)
Explosionsgefährdete Bereiche - Teil 34: Anwendung von
Qualitätsmanagementsystemen für die Herstellung von Ex-Produkten (ISO/IEC 80079-
34:2018)
Atmosphères explosives - Partie 34: Application des systèmes de qualité pour la
fabrication d'équipements (ISO/IEC 80079-34:2018)
Ta slovenski standard je istoveten z: EN ISO/IEC 80079-34:2020
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
13.230 Varstvo pred eksplozijo Explosion protection
SIST EN ISO/IEC 80079-34:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO/IEC 80079-34:2020

---------------------- Page: 2 ----------------------
SIST EN ISO/IEC 80079-34:2020


EN ISO/IEC 80079-34
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 29.260.20 Supersedes EN ISO/IEC 80079-34:2011
English Version

Explosive atmospheres - Part 34: Application of quality
systems for ex product manufacture (ISO/IEC 80079-
34:2018)
Atmosphères explosives - Partie 34: Application de Explosionsgefährdete Bereiche - Teil 34: Anwendung
systèmes de management de la qualité pour la von Qualitätsmanagementsystemen für die Herstellung
fabrication des produits Ex (ISO/CEI 80079-34:2018) von Ex-Produkten (ISO/IEC 80079-34:2018)
This European Standard was approved by CEN on 29 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 80079-34:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO/IEC 80079-34:2020
EN ISO/IEC 80079-34:2020 (E)
Contents Page
European foreword . 4
Annex ZA (normative) Normative references to international publications and the
corresponding European publications . 5
Annex ZB (informative) Information relevant to equipment and protective systems
according to standards harmonized under Directive 2014/34/EU . 6
ZB.1 Introduction . 6
ZB.2 Non-electrical equipment (EN 13463-1) . 6
ZB.3 Protection by flow restricting enclosure "fr" (EN 13463-2) . 6
ZB.4 Protection by flameproof enclosure "d" (EN 13463-3) . 6
ZB.5 Protection by constructional safety "c" (EN 13463-5) . 6
ZB.6 Protection by control of ignition sources "b" (EN 13463-6) . 6
ZB.7 Protection by pressurised enclosures "p" (EN 13463-7) . 6
ZB.8 Protection by liquid immersion "k" (EN 13463-8) .
...

SLOVENSKI STANDARD
oSIST prEN ISO/IEC 80079-34:2017
01-september-2017
Potencialno eksplozivne atmosfere - 34. del: Uporaba sistemov kakovosti za
izdelavo opreme (ISO/IEC/DIS 80079-34:2017)
Explosive atmospheres - Part 34: Application of quality systems for equipment
manufacture (ISO/IEC/DIS 80079-34:2017)
Explosionsgefährdete Bereiche - Teil 34: Anwendung von
Qualitätsmanagementsystemen für die Herstellung von Ex-Produkten (ISO/IEC/DIS
80079-34:2017)
Atmosphères explosives - Partie 34: Application des systèmes de qualité pour la
fabrication d'équipements (ISO/IEC/DIS 80079-34:2017)
Ta slovenski standard je istoveten z: prEN ISO/IEC 80079-34
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
13.230 Varstvo pred eksplozijo Explosion protection
oSIST prEN ISO/IEC 80079-34:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEC 80079-34:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEC 80079-34:2017
DRAFT INTERNATIONAL STANDARD
ISO/IEC DIS 80079-34
ISO/TMBG Secretariat: ISO
Voting begins on: Voting terminates on:
2017-06-15 2017-09-07
Explosive atmospheres —
Part 34:
Application of quality systems for ex product manufacture
Atmosphères explosives —
Partie 34: Application des systèmes de qualité pour la fabrication d’équipements
ICS: 29.260.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/IEC DIS 80079-34:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO/IEC 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEC 80079-34:2017
ISO/IEC DIS 80079-34:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO/IEC 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEC 80079-34:2017
ISO/IEC DIS 80079-34:2017(E)
ISO/IEC CDV 80079-34/Ed2  IEC:2017 – 2 – 31M/119/CDV
1 CONTENTS
2 FOREWORD . 6
3 INTRODUCTION . 8
4 1 Scope . 9
5 2 Normative references . 9
6 3 Terms and definitions . 9
7 4 Context of the organization . 11
8 4.1 Understanding the organization and its context . 11
9 4.2 Understanding the needs and expectations of interested parties . 11
10 4.3 Determining the scope of the quality management system . 11
11 4.4 Quality management system and its processes . 12
12 5 Leadership . 12
13 5.1 Leadership and commitment . 12
14 5.1.1 General . 12
15 5.1.2 Customer focus . 13
16 5.2 Policy .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.