EN ISO/IEC 80079-38:2016/A1:2018

SLOVENSKI STANDARD
01-oktober-2018
Eksplozivne atmosfere - 38. del: Oprema in komponente, namenjene za uporabo v
eksplozivnih atmosferah v podzemnih rudnikih (ISO/IEC 80079-38:2016)
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres
in underground mines (ISO/IEC 80079-38:2016)
Explosionsfähige Atmosphären - Teil 38: Geräte und Komponenten in explosionsfähigen
Atmosphären in untertägigen Bergwerken (ISO/IEC 80079-38:2016)
Atmosphères explosives - Partie 38: Appareils et composants destinés à être utilisés
dans les mines souterraines grisouteuses (ISO/IEC 80079-38:2016)
Ta slovenski standard je istoveten z: EN ISO/IEC 80079-38:2016/A1:2018
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
73.100.30 Oprema za vrtanje in Equipment for drilling and
izkopavanje mine excavation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO/IEC 80079-
EUROPEAN STANDARD
38:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2018
ICS 29.260.20
English Version
Explosive atmospheres - Part 38: Equipment and
components in explosive atmospheres in underground
mines (ISO/IEC 80079-38:2016)
Atmosphères explosives - Partie 38: Appareils et Explosionsfähige Atmosphären - Teil 38: Geräte und
composants destinés à être utilisés dans les mines Komponenten in explosionsfähigen Atmosphären in
souterraines grisouteuses (ISO/IEC 80079-38:2016) untertägigen Bergwerken (ISO/IEC 80079-38:2016)
This amendment A1 modifies the European Standard EN ISO/IEC 80079-38:2016; it was approved by CEN on 24 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 80079-38:2016/A1:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Endorsement notice . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/34/EU aimed to be covered . 4
Annex ZB (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 6

European foreword
This document (EN ISO/IEC 80079-38:2016/A1:2018) has been prepared by Technical Committee
ISO/TMBG "Technical Management Board - groups" in collaboration with Technical Committee
CEN/TC 305 “Potentially explosive atmospheres - Explosion prevention and protection”, the secretariat
of which is held by DIN.
This Amendment to the European Standard EN ISO/IEC 80079:2018 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by
November 2018, and conflicting national standards shall be withdrawn at the latest by November 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and B, which is an integral part of
this document.
According to th
...