CR 13962:2000
(Main)Guidelines for the application of LAC-components in structures
Guidelines for the application of LAC-components in structures
This document provides guidelines for the application of reinforced LAC 1) components according to EN 1520 in building structures and covers the following types of structural components: - loadbearing wall components (solid); - roof components (solid, hollow core and multilayer); - floor components (solid, hollow core and multilayer); - linear components (beams and piers) and the following types of non-structural components: - non-loadbearing wall components (partition walls); - cladding components. LAC components are industrially manufactured individual parts. A combined action of these parts requires usually the aid of non LAC materials (e.g. reinforcement, metal plates, fixings, anchorages, adhesives, mortar, concrete). The application covers aspects of: - material properties; - design of joints;
- design with components; - means of anchorage or fixtures; - construction and workmanship. The design rules for the LAC components are defined in EN 1520, annex A (Design by calculation) and EN 1520, annex B (Design by testing).
Richtlinien für die Anwendung von LAC-Bauteilen in Bauwerken
Dieses Dokument enthält Richtlinien für die Anwendung von bewehrten LAC-Bauteilen 1) nach EN 1520 in Bauwerken und befaßt sich mit den folgenden Arten von tragenden Bauteilen: - tragende Wandbauteile (massiv); - Dachbauteile (massiv, mit Hohlräumen im Kern und mehrschichtig); - Deckenbauteile (massiv, mit Hohlräumen im Kern und mehrschichtig); - stabförmige Bauteile (Balken und Pfeiler)
sowie den folgenden Arten von nichttragenden Bauteilen: - nichttragende Wandbauteile (Trennwände); - Bauteile für Verkleidungen.
LAC-Bauteile sind werkmäßig hergestellte Einzelbauteile. Ein Zusammenwirken dieser Bauteile erfordert üblicherweise die Mitverwendung von anderen, nicht aus LAC bestehenden Materialien (z.B. Bewehrung, Metallplatten, Befestigungen, Verankerungen, Kleber, Mörtel,
Beton). Folgende Punkte werden behandelt: - Materialeigenschaften; - Bemessung von Fugen; - Bemessung mit Bauteilen; - Verankerungs- und Befestigungsmittel; - Konstruktion und handwerkliche Ausführung. Die Bemessungsregeln für LAC-Bauteile sind definiert in EN 1520, Anhang A (Bemessung auf rechnerischem Wege) und EN 1520, Anhang B (Bemessung auf versuchsmäßigem Wege).
Smernice za uporabo betonskih elementov iz lahkega agregata v konstrukcijah
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jul-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
- Drafting Committee
- CEN/TC 177/WG 2 - Non-fines lightweight concrete components
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Jun-2020
- Completion Date
- 21-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
CR 13962:2000 is a standardization document published by the European Committee for Standardization (CEN). Its full title is "Guidelines for the application of LAC-components in structures". This standard covers: This document provides guidelines for the application of reinforced LAC 1) components according to EN 1520 in building structures and covers the following types of structural components: - loadbearing wall components (solid); - roof components (solid, hollow core and multilayer); - floor components (solid, hollow core and multilayer); - linear components (beams and piers) and the following types of non-structural components: - non-loadbearing wall components (partition walls); - cladding components. LAC components are industrially manufactured individual parts. A combined action of these parts requires usually the aid of non LAC materials (e.g. reinforcement, metal plates, fixings, anchorages, adhesives, mortar, concrete). The application covers aspects of: - material properties; - design of joints; - design with components; - means of anchorage or fixtures; - construction and workmanship. The design rules for the LAC components are defined in EN 1520, annex A (Design by calculation) and EN 1520, annex B (Design by testing).
This document provides guidelines for the application of reinforced LAC 1) components according to EN 1520 in building structures and covers the following types of structural components: - loadbearing wall components (solid); - roof components (solid, hollow core and multilayer); - floor components (solid, hollow core and multilayer); - linear components (beams and piers) and the following types of non-structural components: - non-loadbearing wall components (partition walls); - cladding components. LAC components are industrially manufactured individual parts. A combined action of these parts requires usually the aid of non LAC materials (e.g. reinforcement, metal plates, fixings, anchorages, adhesives, mortar, concrete). The application covers aspects of: - material properties; - design of joints; - design with components; - means of anchorage or fixtures; - construction and workmanship. The design rules for the LAC components are defined in EN 1520, annex A (Design by calculation) and EN 1520, annex B (Design by testing).
CR 13962:2000 is classified under the following ICS (International Classification for Standards) categories: 91.100.30 - Concrete and concrete products. The ICS classification helps identify the subject area and facilitates finding related standards.
CR 13962:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2002
Smernice za uporabo betonskih elementov iz lahkega agregata v konstrukcijah
Guidelines for the application of LAC-components in structures
Richtlinien für die Anwendung von LAC-Bauteilen in Bauwerken
Ta slovenski standard je istoveten z: CR 13962:2000
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...