EN 1739:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structureNODYLUDQHJDDétermination de la résistance au cisaillement des jonctions entre des éléments préfabriqués réalisés en béton cellulaire autoclavé ou en béton de granulats légers a structure ouverte, sous l'effet de forces agissant dans le plan des élémentsBestimmung der Schubtragfähigkeit von Fugen zwischen vorgefertigten Bauteilen aus dampfgehärtetem Porenbeton oder haufwerksporigem Leichtbeton bei Belastung in BauteilebeneTa slovenski standard je istoveten z:EN 1739:2007SIST EN 1739:2007en;fr;de91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SIST EN 1739:20011DGRPHãþDSLOVENSKI
STANDARDSIST EN 1739:200701-julij-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1739April 2007ICS 91.100.30Supersedes EN 1739:1998
English VersionDetermination of shear strength for in-plane forces of jointsbetween prefabricated components of autoclaved aeratedconcrete or lightweight aggregate concrete with open structureDétermination de la résistance au cisaillement desjonctions entre des éléments préfabriqués réalisés enbéton cellulaire autoclavé ou en béton de granulats légers àstructure ouverte, sous l'effet de forces agissant dans leplan des élémentsBestimmung der Schubtragfähigkeit von Fugen zwischenvorgefertigten Bauteilen aus dampfgehärtetem Porenbetonoder haufwerksporigem Leichtbeton bei Belastung inBauteilebeneThis European Standard was approved by CEN on 24 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1739:2007: E

Figures Figure 1 — Example A for reference test set-up for grouted joint.9 Figure 2 — Example B for reference test set-up for grouted joint.10 Figure 3 — Example A for reference test set-up for mechanical joint.11 Figure 4 — Example B for reference test set-up for mechanical joint.12 Figure 5 — Example A for alternative test set-up.13 Figure 6 — Example B for alternative test set-up.14
...