EN 818-5:1999/prA1
(Amendment)Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
This Part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to EN 818-3 together with the appropriate range of components of the same grade in accordance with prEN 1677-5 and 6. These chain slings are intended for lifting objects, materials or goods. NOTE1: Instructions for use and maintenance of chain slings are covered by prEN 818-6. The hazards covered by this Part of the standard are identified in clause 4. Annex A gives an alternative method of rating and marking a chain sling for a specific lifting application Annex B contains the bases for calculation of working load limits. Annex C gives an example of a designation system for chain slings. Annex D gives an example of identification tags for chain slings. Annex ZA gives the relationship with EU Directives.
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 5: Anschlagketten - Güteklasse 4
Chaînes de levage à maillons courts - Sécurité - Partie 5: Elingues en chaînes - Classe 4
Kratkočlene okrogle verige za dvigovalne namene - Varnost - 5. del: Obesne verige - Kakovostni razred 4
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 818-5:2001/oprA1:2006
.UDWNRþOHQHRNURJOHYHULJH]DGYLJRYDOQHQDPHQH9DUQRVWGHO2EHVQHYHULJH
.DNRYRVWQLUD]UHG
Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 5: Anschlagketten -
Güteklasse 4
Chaînes de levage a maillons courts - Sécurité - Partie 5 : Élingues en chaînes - Classe
4
Ta slovenski standard je istoveten z: EN 818-5:1999/prA1
SIST EN 818-5:2001/oprA1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 818-5:2001/oprA1:2006
---------------------- Page: 2 ----------------------
SIST EN 818-5:2001/oprA1:2006
EUROPEAN STANDARD
DRAFT
EN 818-5:1999
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2006
ICS
English Version
Short link chain for lifting purposes - Safety - Part 5: Chain slings
- Grade 4
Chaînes de levage à maillons courts - Sécurité - Partie 5 :
Élingues en chaînes - Classe 4
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 168.
This draft amendment A1, if approved, will modify the European Standard EN 818-5:1999. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 818-5:1999/prA1:2006: E
worldwide for CEN national Members.
-----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.