EN 12808-3:2008
(Main)Grouts for tiles - Part 3: Determination of flexural and compressive strength
Grouts for tiles - Part 3: Determination of flexural and compressive strength
This European Standard applies to all ceramic tile grouts for internal and external tile installations on walls and floors.
This European Standard describes the test method to be used to determine the compressive and flexural strength of ceramic tile grouts.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE Ceramic tile grouts may also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the stones.
Klebstoffe und Fugenmörtel für Fliesen und Platten - Teil 3: Bestimmung der Biege- und Druckfestigkeit
Diese Europäische Norm ist auf sämtliche Fugenmörtel für keramische Fliesen und Platten an Wand und Boden für innen und außen anwendbar.
Diese Europäische Norm beschreibt das Prüfverfahren zur Bestimmung der Druck und Biegefestigkeit von Fugenmörtel für keramische Fliesen und Platten.
Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen hinsichtlich der Planung und Verlegung von keramischen Fliesen/Platten.
ANMERKUNG Fugenmörtel für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten verwendet werden (Natur , Betonwerksteine usw.), sofern diese die Steine nicht negativ beeinflussen.
Mortiers de joints pour carrelage - Partie 3: Détermination de la résistance à la flexion et à la compression
La présente Norme européenne s’applique à tous les mortiers utilisés pour le jointoiement de carrelages
céramiques sur les murs et au sol, à l’intérieur et à l’extérieur.
La présente Norme européenne spécifie la méthode d’essai qui doit être utilisée pour déterminer la résistance
à la flexion et à la compression des mortiers pour le jointement de carrelages céramiques.
La présente Norme européenne ne contient pas de spécifications, ni de recommandations pour la conception,
la pose et le jointoiement des carrelages en céramique.
NOTE Les mortiers de joints pour carrelages céramiques peuvent être également utilisés pour d’autres types de
carrelage (pierre naturelle ou agglomérée, etc.) s'ils sont compatibles.
Lepila in fugirne malte za ploščice - 3. del: Ugotavljanje upogibne in tlačne trdnosti
General Information
- Status
- Withdrawn
- Publication Date
- 21-Oct-2008
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 67 - Ceramic tiles
- Drafting Committee
- CEN/TC 67/WG 3 - Adhesives and grouts for tiles
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Sep-2022
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Replaces
EN 12808-3:2001 - Grouts for tiles - Part 3: Determination of flexural and compressive strength - Effective Date
- 22-Dec-2008
- Effective Date
- 21-Sep-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 12808-3:2008 is a standard published by the European Committee for Standardization (CEN). Its full title is "Grouts for tiles - Part 3: Determination of flexural and compressive strength". This standard covers: This European Standard applies to all ceramic tile grouts for internal and external tile installations on walls and floors. This European Standard describes the test method to be used to determine the compressive and flexural strength of ceramic tile grouts. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile grouts may also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the stones.
This European Standard applies to all ceramic tile grouts for internal and external tile installations on walls and floors. This European Standard describes the test method to be used to determine the compressive and flexural strength of ceramic tile grouts. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile grouts may also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the stones.
EN 12808-3:2008 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives; 91.100.10 - Cement. Gypsum. Lime. Mortar. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12808-3:2008 has the following relationships with other standards: It is inter standard links to EN 12808-3:2001, EN 13888-2:2022, EN ISO 15605:2004, EN 196-1:2005, EN 1067:2005, EN ISO 11111-1:2009, EN ISO 11111-1:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12808-3:2008 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12808-3:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mörtel und Klebstoffe für Fliesen und Platten — Teil 3: Bestimmung der Biege- und DruckfestigkeitMortiers de joints pour carrelage - Partie 3: Détermination de la résistance à la flexion et à la compressionGrouts for tiles - Part 3: Determination of flexural and compressive strength91.100.23Ceramic tiles91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12808-3:2008SIST EN 12808-3:2009en,fr,de01-marec-2009SIST EN 12808-3:2009SLOVENSKI
STANDARDSIST EN 12808-3:20021DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12808-3October 2008ICS 83.180; 91.100.10Supersedes EN 12808-3:2001
English VersionGrouts for tiles - Part 3: Determination of flexural andcompressive strengthMortiers de joints pour carrelage - Partie 3: Déterminationde la résistance à la flexion et à la compressionMörtel und Klebstoffe für Fliesen und Platten - Teil 3:Bestimmung der Biege- und DruckfestigkeitThis European Standard was approved by CEN on 29 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12808-3:2008: ESIST EN 12808-3:2009
1 Scope This European Standard applies to all ceramic tile grout
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...