EN 12373-8:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
This part of this European standard specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultra-violet light and heat. The method is not suitable for testing coloured anodic oxidation coatings that are heat sensitive. Note: Dark coloured test pieces will normally reach the highest temperatures.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 8: Vergleichsbestimmung der Beständigkeit von gefärbten, anodisch erzeugten Oxidschichten gegen ultravioletes Licht und Wärme
Dieser Teil dieser Europäische Norm legt ein Vergleichsverfahren zur Betimmung der Beständigkeit gefärbter, anodisch erzeugter Oxidschichten gegen ultraviolettes Licht und Wärme fest. Das Verfahren ist nicht zur Prüfung gefärbter, anodisch erzeugter Oxidschichten, die sehr wärmeempfindlich sind, geeignet. Anmerkung: Die höchste Temperatur erreichen üblicherweise dunkel gefärbte Proben.
Aluminium et alliages d'aluminium - Anodisation - Partie 8: Détermination de la solidité comparée à la lumière ultraviolette et à la chaleur des couches anodiques colorées
La présente norme européenne spécifie une méthode comparative de détermination de la solidité à la lumière ultraviolette et à la chaleur des couches anodiques colorées. L'essai n'est pas approprié pour les couches anodiques colorées qui sont très sensibles à la chaleur. Note: Ce sont les éprouvettes de couleur foncée qui atteignent normalement les températures les plus élevées.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 8. del: Primerjalno ugotavljanje obstojnosti barvnih anodnooksidiranih prevlek pri ultravijolični svetlobi in toploti
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 13-Jul-2010
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Jul-2010
- Completion Date
- 14-Jul-2010
Relations
- Effective Date
- 17-Jul-2010
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 12373-8:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings". This standard covers: This part of this European standard specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultra-violet light and heat. The method is not suitable for testing coloured anodic oxidation coatings that are heat sensitive. Note: Dark coloured test pieces will normally reach the highest temperatures.
This part of this European standard specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultra-violet light and heat. The method is not suitable for testing coloured anodic oxidation coatings that are heat sensitive. Note: Dark coloured test pieces will normally reach the highest temperatures.
EN 12373-8:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-8:1998 has the following relationships with other standards: It is inter standard links to EN ISO 6581:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-8:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Anodisieren - Teil 8: Vergleichsbestimmung der Beständigkeit von gefärbten, anodisch erzeugten Oxidschichten gegen ultravioletes Licht und WärmeAluminium et alliages d'aluminium - Anodisation - Partie 8: Détermination de la solidité comparée a la lumiere ultraviolette et a la chaleur des couches anodiques coloréesAluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...