EN 12373-4:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
This part of this European Standard specifies a method of estimating the loss of absorptive power of anodic oxidation coatings that have undergone a sealing treatment, by dye absorption after acid pretreatment. The method is suitable for use as a production control method and is applicable to anodic oxidation coatings which may be subjected to weathering or aggressive environments or where resistance to staining is important.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 4: Abschätzung der Anfärbbarkeit von anodisch erzeugten Oxidschichten nach dem Verdichten durch Farbtropfentest mit vorheriger Säurebehandlung
Dieser Teil dieser Europäischen Norm legt ein Verfahren zur Abschätzung der Anfärbbarkeit von verdichteten, anodisch erzeugten Oxidschichten durch den Farbtropfentest mit vorheriger Säurebehandlung fest. Das Verfahren ist zur Produktionsüberwachung geeignet und auf anodisch erzeugte Oxidschichten anwendbar, die einer Bewitterung oder aggressiven Umwelteinflüssen ausgesetzt werden oder bei denen eine Widerstandsfähigkeit gegenüber Fleckenbildung wichtig ist.
Aluminium et alliages d'aluminium - Anodisation - Partie 4: Appréciation de la perte du pouvoir absorbant des couches d'oxydes anodiques par essai à la goutte de colorant avec action acide préalable
La présente partie de cette norme européenne spécifie une méthode permettant d'apprécier la perte du pouvoir absorbant des couches anodiques ayant subi un traitement de colmatage, par un essai de coloration après une action acide préalable. La méthode convient au contrôle de production et elle s'applique aux couches d'oxydes anodiques qui doivent résister aux intempéries ou à des milieux agressifs, ou lorsqu'une résistance aux taches est importante.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 4. del: Ocena izgube absorbirnosti anodnooksidiranih prevlek po tesnjenju por s kapljičnim preskusom z barvilom ob predhodni kislinski obdelavi
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 30-Jun-2010
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jul-2010
- Completion Date
- 01-Jul-2010
Relations
- Effective Date
- 03-Jul-2010
Frequently Asked Questions
EN 12373-4:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment". This standard covers: This part of this European Standard specifies a method of estimating the loss of absorptive power of anodic oxidation coatings that have undergone a sealing treatment, by dye absorption after acid pretreatment. The method is suitable for use as a production control method and is applicable to anodic oxidation coatings which may be subjected to weathering or aggressive environments or where resistance to staining is important.
This part of this European Standard specifies a method of estimating the loss of absorptive power of anodic oxidation coatings that have undergone a sealing treatment, by dye absorption after acid pretreatment. The method is suitable for use as a production control method and is applicable to anodic oxidation coatings which may be subjected to weathering or aggressive environments or where resistance to staining is important.
EN 12373-4:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-4:1998 has the following relationships with other standards: It is inter standard links to EN ISO 2143:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-4:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Anodisieren - Teil 4: Abschätzung der Anfärbbarkeit von anodisch erzeugten Oxidschichten nach dem Verdichten durch Farbtropfentest mit vorheriger SäurebehandlungAluminium et alliages d'aluminium - Anodisation - Partie 4: Appréciation de la perte du pouvoir absorbant des couches d'oxydes anodiques par essai a la goutte de colorant avec action acide préalableAluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys25.220.20Površinska obdelavaSurface tre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...