EN 12373-7:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
This part of this European Standard specifies a method of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment. A related standard (EN 12373-6) describes the same method used without prior acid treatment.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 7: Prüfung der Qualität von verdichteten, anodisch erzeugten Oxidschichten durch Bestimmung des Masseverlustes nach Eintauchen in Chromphosphorsäure-Lösung mit vorheriger Säurebehandlung
Dieser Teil dieser Europäischen Norm legt ein Verfahren zur Prüfung der Qualität verdichteter, anodisch erzeugter Oxidschichten auf Aluminium und Aluminiumlegierungen fest, indem der Massenverlust nach Eintauchen in eine Chromphosphorsäure-Lösung mit vorheriger Saürebehandlung gemessen wird. Eine weitere Norm (EN 12373-6) beschreibt das gleiche Verfahren ohne vorherige Säurebehandlung.
Aluminium et alliages d'aluminium - Anodisation - Partie 7: Evaluation de la qualité des couches anodiques colmatées par mesurage de la perte de masse après immersion en solution phosphochromique avec traitement acide préalable
La présente partie de cette norme européenne spécifie une méthode d'évaluation de la qualité des couches anodiques colmatées sur aluminium et alliages d'aluminium par mesurage de la perte de masse après immersion en solution phosphochromique avec traitement acide préalable. Une norme connexe (EN 12373-6) décrit la même méthode sans traitement acide préalable.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 7. del: Preskus kakovosti tesnjenih anodnooksidiranih prevlek z meritvijo izgube mase po potopitvi v raztopino fosforjeve in kromove kisline s predhodno kislinsko obdelavo
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 20-Aug-2002
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Aug-2002
- Completion Date
- 21-Aug-2002
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 12373-7:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment". This standard covers: This part of this European Standard specifies a method of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment. A related standard (EN 12373-6) describes the same method used without prior acid treatment.
This part of this European Standard specifies a method of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment. A related standard (EN 12373-6) describes the same method used without prior acid treatment.
EN 12373-7:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-7:1998 has the following relationships with other standards: It is inter standard links to EN 12373-7:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-7:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Anodna oksidacija - 7. del: Preskus kakovosti tesnjenih anodnooksidiranih prevlek z meritvijo izgube mase po potopitvi v raztopino fosforjeve in kromove kisline s predhodno kislinsko obdelavoAluminium und Aluminiumlegierungen - Anodisieren - Teil 7: Prüfung der Qualität von verdichteten, anodisch erzeugten Oxidschichten durch Bestimmung des Masseverlustes nach Eintauchen in Chromphosphorsäure-Lösung mit vorheriger SäurebehandlungAluminium et alliages d'aluminium - Anodisation - Partie 7: Evaluation de la qualité des couches anodiques colmatées par mesurage de la perte de masse apres im
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...