EN 1776:1998
(Main)Gas supply systems - Natural gas measuring stations - Functional requirements
Gas supply systems - Natural gas measuring stations - Functional requirements
This European standard specifies functional requirements for the design, construction, commissioning, operation and maintenance of new gas measuring stations for non-domestic custody transfer of natural gas as described in ISO/DIS13686 with a design capacity equal to or greater than 500 m3/h (at base conditions, see 4.1) and for operating pressures equal to or greater than 1bar (gauge pressure). NOTE: Installations using diaphragm gas meters as primary measuring instruments are not covered by this standard.
Gasversorgung - Erdgasmeßanlagen - Funktionale Anforderungen
Mit der vorliegenden Europäischen Norm werden funktionelle Anforderungen für die Planung, den Bau, die Inbetriebnahme, den Betrieb und die Instandhaltung von neuen Gasmeßanlagen für Erdgas, wie in ISO/DIS 13686 beschrieben, für den nichthäuslichen geschäftlichen Verkehr mit einer Auslegungskapazität gleich oder größer 500 m3/h (unter Basisbedingungen, siehe 4.1) und für Betriebsdrücke gleich oder größer 1 bar (Überdruck) festgelegt. ANMERKUNG: Anlagen, deren Primärmeßgerät aus einem Balgengaszähler besteht, sind vom Anwendungsbereich dieser Norm ausgeschlossen.
Alimentation en gaz - Postes de comptage de gaz naturel - Prescriptions fonctionnelles
La présente norme européenne spécifie les prescriptions fonctionnelles pour la conception, la construction, la mise en service, l'exploitation et la maintenance de nouveaux postes de comptage de gaz pour la transaction non domestique de gaz naturel comme décrit dans l'ISO/DIS13686, d'une capacité de construction égale ou supérieure à 500m3/h (dans les conditions de base, voir 4.1) et pour les pressions d'exploitation égales ou supérieures à 1 bar (pression effective). NOTE: Les installations munies de compteurs à gaz à membranes comme instruments de mesure principaux sont exclues du domaine d'application de la présente norme.
Sistemi oskrbe s plinom – Merilne naprave za zemeljski plin – Funkcionalne zahteve
General Information
- Status
- Withdrawn
- Publication Date
- 15-Dec-1998
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 234 - Gas infrastructure
- Drafting Committee
- CEN/TC 234/WG 5 - Gas measuring
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Dec-2015
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 23-Dec-2015
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN 12331:2003 - Food processing machinery - Mincing machines - Safety and hygiene requirements - Effective Date
- 28-Jan-2026
- Refers
EN 12267:2003 - Food processing machinery - Circular saw machines - Safety and hygiene requirements - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ABS Group Brazil
ABS Group certification services in Brazil.
Bureau Veritas Kuwait
Bureau Veritas certification services in Kuwait.
Bureau Veritas Nigeria
Bureau Veritas certification services in Nigeria.
Sponsored listings
Frequently Asked Questions
EN 1776:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Gas supply systems - Natural gas measuring stations - Functional requirements". This standard covers: This European standard specifies functional requirements for the design, construction, commissioning, operation and maintenance of new gas measuring stations for non-domestic custody transfer of natural gas as described in ISO/DIS13686 with a design capacity equal to or greater than 500 m3/h (at base conditions, see 4.1) and for operating pressures equal to or greater than 1bar (gauge pressure). NOTE: Installations using diaphragm gas meters as primary measuring instruments are not covered by this standard.
This European standard specifies functional requirements for the design, construction, commissioning, operation and maintenance of new gas measuring stations for non-domestic custody transfer of natural gas as described in ISO/DIS13686 with a design capacity equal to or greater than 500 m3/h (at base conditions, see 4.1) and for operating pressures equal to or greater than 1bar (gauge pressure). NOTE: Installations using diaphragm gas meters as primary measuring instruments are not covered by this standard.
EN 1776:1998 is classified under the following ICS (International Classification for Standards) categories: 75.180.30 - Volumetric equipment and measurements. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1776:1998 has the following relationships with other standards: It is inter standard links to EN 1776:2015, EN 12124:2005, EN 13389:2005, EN 1594:2024, EN 12125:2005, EN 12261:2024, EN 625:1995, CEN/TS 15365:2006, EN 12186:2025, EN 203-1:1992/A1:1995, EN 12480:2025, EN 12331:2003, EN 12267:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1776:1998 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: M/017. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1776:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sistemi oskrbe s plinom – Merilne naprave za zemeljski plin – Funkcionalne zahteveGasversorgung - Erdgasmeßanlagen - Funktionale AnforderungenAlimentation en gaz - Postes de comptage de gaz naturel - Prescriptions fonctionnellesGas supply systems - Natural gas measuring stations - Functional requirements91.140.40Sistemi za oskrbo s plinomGas supply systemsICS:Ta slovenski standard je istoveten z:EN 1776:1998SIST EN 1776:1999en01-december-1999SIST EN 1776:1999SLOVENSKI
STANDARD
SIST E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...