EN ISO 10510:1999
(Main)Tapping screw and washer assemblies with plain washers (ISO 10510:1999)
Tapping screw and washer assemblies with plain washers (ISO 10510:1999)
IEC 60695-11-2:2013 gives the requirements for the production and confirmation of a nominal 1 kW, propane/air pre-mixed test flame.
This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition of IEC 60695-11-2 cancels and replaces the first edition published in 2003. It constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition:
- editorial changes to align with other TC 89 test flame publications;
- editorially updated throughout;
- technical changes to the burner set up requirements (see 4.1, 4.2.2, 5 and Fig. A.6);
- technical changes to the test flame confirmation procedure (see 6.2 and 6.3). It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
Key words: Flame, Pre-mixed flame 1 kW test flame
Kombi-Blechschrauben mit flachen Scheiben (ISO 10510:1999)
Diese Internationale Norm legt Anforderungen für Kombi-Blechschrauben mit Blechschraubengewinden von ST2,2 bis ST9,5, mit flach aufliegenden Köpfen und mechanischen Eigenschaften nach ISO 2702 fest. Die flachen Scheiben sind unverlierbar und können sich frei drehen.
Vis à tôle à rondelle plate incorporée (ISO 10510:1999)
La présente Norme internationale spécifie les caractéristiques des vis à tôle à rondelle plate incorporée de filetage ST2,2 à ST9,5 inclus, présentant une surface d'appui plane, et dont les caractéristiques mécaniques sont conformes à l'ISO 2702.Les rondelles plates sont captives, c'est-à-dire destinées à empêcher les dévissages et laisser la possibilité de tourner.
Pločevinski vijaki z ujeto podložko (ISO 10510:1999)
General Information
- Status
- Withdrawn
- Publication Date
- 31-Jul-1999
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Replaced By
EN ISO 10510:2011 - Tapping screw and washer assemblies with plain washers (ISO 10510:2011) - Effective Date
- 09-Apr-2011
Frequently Asked Questions
EN ISO 10510:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tapping screw and washer assemblies with plain washers (ISO 10510:1999)". This standard covers: IEC 60695-11-2:2013 gives the requirements for the production and confirmation of a nominal 1 kW, propane/air pre-mixed test flame. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition of IEC 60695-11-2 cancels and replaces the first edition published in 2003. It constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition: - editorial changes to align with other TC 89 test flame publications; - editorially updated throughout; - technical changes to the burner set up requirements (see 4.1, 4.2.2, 5 and Fig. A.6); - technical changes to the test flame confirmation procedure (see 6.2 and 6.3). It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. Key words: Flame, Pre-mixed flame 1 kW test flame
IEC 60695-11-2:2013 gives the requirements for the production and confirmation of a nominal 1 kW, propane/air pre-mixed test flame. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition of IEC 60695-11-2 cancels and replaces the first edition published in 2003. It constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition: - editorial changes to align with other TC 89 test flame publications; - editorially updated throughout; - technical changes to the burner set up requirements (see 4.1, 4.2.2, 5 and Fig. A.6); - technical changes to the test flame confirmation procedure (see 6.2 and 6.3). It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. Key words: Flame, Pre-mixed flame 1 kW test flame
EN ISO 10510:1999 is classified under the following ICS (International Classification for Standards) categories: 21.060.01 - Fasteners in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 10510:1999 has the following relationships with other standards: It is inter standard links to EN ISO 10510:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 10510:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kombi-Blechschrauben mit flachen Scheiben (ISO 10510:1999)Vis a tôle a rondelle plate incorporée (ISO 10510:1999)Tapping screw and washer assemblies with plain washers (ISO 10510:1999)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istov
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...