iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1754:1997

(Main)

Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system

Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system

This European Standard specifies - a designation system for magnesium and magnesium alloys by numbers; - a designation system for magnesium and magnesium alloys by symbols. This standard applies to magnesium and magnesium alloys for ingots intended for remelting and to magnesium and magnesium alloys for castings, including anodes.

Magnesium und Magnesiumlegierungen - Anoden, Blockmetalle und Gußstücke aus Magnesium und Magnesiumlegierungen - Bezeichnungssystem

Diese Europäische Norm legt - ein Bezeichnungssystem für Magnesium und Magnesiumlegierungen durch Werkstoffnummern; - ein Bezeichnungssystem für Magnesium und Magnesiumlegierungen durch Werkstoffkurzzeichen; fest. Diese Norm gilt für Magnesium und Magnesiumlegierungen für Blockmetalle zum Umschmelzen und für Magnesium und Magnesiumlegierungen für Gußstücke, einschließlich Anoden.

Magnésium et alliages de magnésium - Anodes, lingots et pièces moulées en magnésium et en alliages de magnésium - Système de désignation

La présente norme européenne spécifie: - un système de désignation par des numéros de matériaux, pour le magnésium et les alliages de magnésium; - un système de désignation par des symboles de matériaux, pour le magnésium et les alliages de magnésium. La présente norme s'applique au magnésium et aux alliagesde magnésium pour les lingots destinés à la refusion ainsi qu'au magnésium et aux alliages de magnésium pour des pièces moulées, y compris les anodes.

Magnezij in magnezijeve zlitine - Anode, ingoti in ulitki iz magnezijevih zlitin - Sistem označevanja

General Information

Status
Withdrawn
Publication Date
17-Jun-1997
Withdrawal Date
04-Aug-2015
ICS
77.150.20 - Magnesium products
Technical Committee
CEN/TC 190 - Foundry technology
Drafting Committee
CEN/TC 190/WG 1 - Technical conditions of delivery and cast iron designation
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
05-Aug-2015
Ref Project
SIST EN 1754:1998 - Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system

Relations

Replaced By
EN 1754:2015 - Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers
Effective Date
21-Dec-2011
Parent
EN 1753:1997 - Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Effective Date
22-Dec-2008

Buy Standard

EN 1754:1998EN 1754:1998
PreviousNext
Standard
EN 1754:1998
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Magnesium und Magnesiumlegierungen - Anoden, Blockmetalle und Gußstücke aus Magnesium und Magnesiumlegierungen - BezeichnungssystemMagnésium et alliages de magnésium - Anodes, lingots et pieces moulées en magnésium et en alliages de magnésium - Systeme de désignationMagnesium and magnesium a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1753:2019(Main)
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
SIST EN 1753:2019

This document defines the grades and the corresponding requirements for cast alloyed magnesium materials.
This document specifies 2 groups of magnesium alloy grades by a classification based on the chemical composition. The first group deals with grades for magnesium alloy ingots. The second group deals with grades for magnesium alloy castings.
This document also specifies mechanical properties measured on test pieces machined from cast samples.
This document does not cover technical delivery conditions for magnesium alloy castings (see EN 1559-1 [7] and EN 1559-5 [8]).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12438:2017(Main)
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
SIST EN 12438:2017

This European Standard specifies the grades and the corresponding requirements for magnesium alloys for cast anodes.
This European Standard specifies 2 groups of cast magnesium alloy grades by a classification based on chemical composition. The first group deals with magnesium alloy ingots for anodes. The second group deals with magnesium alloy anode castings.
This European Standard specifies chemical composition, designation, testing and inspection documentation.
This European Standard does not cover technical delivery conditions for magnesium alloy anode castings (see EN 1559-1 [3] and EN 1559-5 [4]).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1559-5:2017(Main)
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
SIST EN 1559-5:2017

This part of EN 1559 specifies the additional technical delivery conditions for castings, see EN 1753 and cast anodes, see EN 12438 made from magnesium alloys.
This part of EN 1559 applies to magnesium alloy castings produced in sand or permanent moulds or by pressure die casting, centrifugal casting, continuous casting or investment casting.
This part of EN 1559 does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as re-melting or extrusion.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1754:2015(Main)
Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers
SIST EN 1754:2015

This European Standard specifies a material designation system for magnesium and magnesium alloys either by numbers or by symbols for castings including anodes and ingots intended for remelting.
The designation system by numbers is only applicable to standardized magnesium and magnesium alloys (see 2.1).
The designation system by symbols is applicable to
a)   standardized magnesium and magnesium alloys (see 2.1);
b)   non-standardized magnesium and magnesium alloys (see 2.2).
NOTE 1   The standardized designation by symbols does not necessarily imply that the material is standardized.
NOTE 2   Magnesium and magnesium alloys for aerospace applications referred to in European standards prepared by AECMA (fr: Association Européenne des Constructeurs de Matériel Aérospatial) have different designations.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1753:2019(Main)
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
SIST EN 1753:2019

This document defines the grades and the corresponding requirements for cast alloyed magnesium materials.
This document specifies 2 groups of magnesium alloy grades by a classification based on the chemical composition. The first group deals with grades for magnesium alloy ingots. The second group deals with grades for magnesium alloy castings.
This document also specifies mechanical properties measured on test pieces machined from cast samples.
This document does not cover technical delivery conditions for magnesium alloy castings (see EN 1559-1 [7] and EN 1559-5 [8]).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12438:2017(Main)
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
SIST EN 12438:2017

This European Standard specifies the grades and the corresponding requirements for magnesium alloys for cast anodes.
This European Standard specifies 2 groups of cast magnesium alloy grades by a classification based on chemical composition. The first group deals with magnesium alloy ingots for anodes. The second group deals with magnesium alloy anode castings.
This European Standard specifies chemical composition, designation, testing and inspection documentation.
This European Standard does not cover technical delivery conditions for magnesium alloy anode castings (see EN 1559-1 [3] and EN 1559-5 [4]).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1559-5:2017(Main)
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
SIST EN 1559-5:2017

This part of EN 1559 specifies the additional technical delivery conditions for castings, see EN 1753 and cast anodes, see EN 12438 made from magnesium alloys.
This part of EN 1559 applies to magnesium alloy castings produced in sand or permanent moulds or by pressure die casting, centrifugal casting, continuous casting or investment casting.
This part of EN 1559 does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as re-melting or extrusion.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 755-9:2016(Main)
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
SIST EN 755-9:2016

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded profile with a cross section contained within a circumscribing circle not greater than 800 mm (see Figure 1).
The temper designations used in this part are according to EN 515.
This European Standard applies to extruded profiles for general engineering applications only.
(...)

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1754:2015(Main)
Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers
SIST EN 1754:2015

This European Standard specifies a material designation system for magnesium and magnesium alloys either by numbers or by symbols for castings including anodes and ingots intended for remelting.
The designation system by numbers is only applicable to standardized magnesium and magnesium alloys (see 2.1).
The designation system by symbols is applicable to
a)   standardized magnesium and magnesium alloys (see 2.1);
b)   non-standardized magnesium and magnesium alloys (see 2.2).
NOTE 1   The standardized designation by symbols does not necessarily imply that the material is standardized.
NOTE 2   Magnesium and magnesium alloys for aerospace applications referred to in European standards prepared by AECMA (fr: Association Européenne des Constructeurs de Matériel Aérospatial) have different designations.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day