EN 12373-3:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
This Part of this European Standard specifies a non-destructive method of determining the thickness of anodic oxidation coatings on aluminium and its alloys using a split-beam microscope. The method is applicable, in most industrial cases, to anodic oxidation coatings above 10 um, or above 5 um when the surface is smooth.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 3: Bestimmung der Dicke von anodisch erzeugten Oxidschichten - Zerstörungsfreie Messung mit Lichtschnittmikroskop
Dieser Teil dieser Europäischen Norm legt ein zerstörungsfreies Verfahren zur Bestimmung der Dicke anodisch erzeugter Oxidschichten auf Aluminium und Aluminiumlegierungen unter Einsatz eines Lichtschnittmikroskops fest. Das Verfahren ist anwendbar für die meisten industriell anodisch erzeugten Oxidschichten über 10 um oder bei glatten Oberflächen über 5 um.
Aluminium et alliages d'aluminium - Anodisation - Partie 3: Détermination de l'épaisseur des couches anodiques - Méthode non destructive au microscope à coupe optique
La présente partie de cette norme européenne spécifie une méthode non destructive pour déterminer l'épaisseur des couches anodiques sur l'aluminium et ses alliages en utilisant un microscope à coupe optique. Cette méthode est applicable dans la plupart des cas industriels aux couches anodiques d'épaisseur supérieure à 10 um, ou supérieure à 5 um lorsque la surface est lisse.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 3. del: Ugotavljanje debelin anodnih oksidnih prevlek - Neporušitvena meritev s posebnim svetlobnim mikroskopom
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 31-Aug-2010
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Sep-2010
- Completion Date
- 01-Sep-2010
Relations
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 12373-3:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope". This standard covers: This Part of this European Standard specifies a non-destructive method of determining the thickness of anodic oxidation coatings on aluminium and its alloys using a split-beam microscope. The method is applicable, in most industrial cases, to anodic oxidation coatings above 10 um, or above 5 um when the surface is smooth.
This Part of this European Standard specifies a non-destructive method of determining the thickness of anodic oxidation coatings on aluminium and its alloys using a split-beam microscope. The method is applicable, in most industrial cases, to anodic oxidation coatings above 10 um, or above 5 um when the surface is smooth.
EN 12373-3:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-3:1998 has the following relationships with other standards: It is inter standard links to EN ISO 2128:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-3:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Anodna oksidacija - 3. del: Ugotavljanje debelin anodnih oksidnih prevlek - Neporušitvena meritev s posebnim svetlobnim mikroskopomAluminium und Aluminiumlegierungen - Anodisieren - Teil 3: Bestimmung der Dicke von anodisch erzeugten Oxidschichten - Zerstörungsfreie Messung mit LichtschnittmikroskopAluminium et alliages d'aluminium - Anodisation - Partie 3: Détermination de l'épaisseur des couches anodiques - Méthode non destructive au microscope a coupe optiqueAluminium
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...