CEN/TS 419221-4:2016
(Main)Protection Profiles for TSP cryptographic modules - Part 4: Cryptographic module for CSP signing operations without backup
Protection Profiles for TSP cryptographic modules - Part 4: Cryptographic module for CSP signing operations without backup
This Technical Specification specifies a protection profile for cryptographic modules used by certification service providers (as specified in Directive 1999/93) for signing operations, without key backup. Target applications include root certification authorities (certification authorities which issue certificates to other CAs and is at the top of a CA hierarchy) and other certification service providers where there is a high risk of direct physical attacks against the module.
Schutzprofile für kryptographische Module von vertrauenswürdigen Dienstanbietern - Teil 4: Schutzprofil für CSP Signieroperationen ohne Sicherung
Profils de protection pour modules cryptographiques utilisés par les prestataires de services de confiance - Partie 4: Module cryptographique utilisé par le prestataire de services de certification pour les opérations de signature sans sauvegarde
Zaščitni profili za TSP kriptografske module - 4. del: Kriptografski modul za postopke podpisovanja CSP brez varnostne kopije
Ta tehnična specifikacija določa zaščitni profil za kriptografske module, ki jih uporabljajo overitelji (kot je določeno v Direktivi 1999/93) za postopke podpisovanja brez varnostne kopije. Ciljne vrste uporabe vključujejo korenske overitelje potrdil (overitelji potrdil, ki izdajajo potrdila drugim overiteljem potrdil in so na vrhu hierarhije overiteljev potrdil) in druge overitelje, kjer obstaja visoko tveganje neposrednih fizičnih napadov na modul.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 419221-4:2017
01-januar-2017
=DãþLWQLSURILOL]D763NULSWRJUDIVNHPRGXOHGHO.ULSWRJUDIVNLPRGXO]D
SRVWRSNHSRGSLVRYDQMD&63EUH]YDUQRVWQHNRSLMH
Protection Profiles for TSP cryptographic modules - Part 4: Cryptographic module for
CSP signing operations without backup
Sicherheitsanforderungen für vertrauenswürdige Systeme zur Verwaltung von
Zertifikaten für elektronische Signaturen - Teil 4: Kryptographisches Modul für CSP
Signieroperationen - Schutzprofil (CMCSO-PP)
Exigences de sécurité concernant les systèmes fiables gérant des certificats de
signatures électroniques - Partie 4 : Module cryptographique pour les opérations de
signature électronique des fournisseurs de services de certification - Profil de protection -
CMCSO PP
Ta slovenski standard je istoveten z: CEN/TS 419221-4:2016
ICS:
35.040.01 Kodiranje informacij na Information coding in general
splošno
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST-TS CEN/TS 419221-4:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 419221-4:2017
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 419221-4:2017
CEN/TS 419221-4
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
July 2016
TECHNISCHE SPEZIFIKATION
ICS 35.240.30; 35.040 Supersedes CWA 14167-4:2004
English Version
Protection Profiles for TSP cryptographic modules - Part 4:
Cryptographic module for CSP signing operations without
backup
Exigences de sécurité concernant les systèmes fiables Schutzprofile für kryptographische Module von
gérant des certificats de signatures électroniques - vertrauenswürdigen Dienstanbietern - Teil 4:
Partie 4 : Module cryptographique pour les opérations Schutzprofil für CSP Signieroperationen ohne
de signature électronique des fournisseurs de services Sicherung
de certification - Profil de protection - CMCSO PP
This Technical Specification (CEN/TS) was approved by CEN on 8 May 2016 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 419221-4:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 419221-4:2017
CEN/TS 419221-4:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 PP Introduction . 6
4.1 General . 6
4.2 PP Reference . 6
4.3 Prote
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.