EN 814-1:1997
(Main)Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations
This standard specifies the terms and definitions for the rating and performance of air and water cooled air conditioners, air/air and water/air heatpumps with electrically driven compressors as well as the properties of the units when used in cooling mode. When these units are used in heating mode by reversing the refrigerating cycle, then prEN 255-1 applies. This standard applies to factory-made units which can be ducted.
Luftkonditionierer und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Kühlen - Teil 1: Benennungen, Definitionen und Bezeichnungen
Dieser Teil der EN 814 legt die Benennungen und Definitionen für die Klassifi- zierung und Leistung von luft- und wassergekühlten Luftkonditionieren, Luft/ Luft- und Wasser/Luft-Wärmepumpen mit elektrisch angetriebenen Verdichtern sowie die Eigenschaften der Geräte zum Kühlen fest. Werden diese Geräte durchUmschalten des Kältekreislaufs zum Heizn eingesetzt, dann gilt prEN 255-1.
Climatiseurs et pompes à chaleur avec compresseur entraîné par moteur électrique - Mode réfrigération - Partie 1: Termes, définitions et désignations
La présente partie de l'EN 814 spécifie les termes et définitions relatifs à l'évaluation et aux performances des climatiseurs à condensation par air et à condensation par eau et des pompes à chaleur air/air et eau/air avec compres- seur entraîné par moteur électrique, ainsi que les caractéristiques des appa- reils lorsqu'ils sont utilisés en mode réfrigération. Lorsque ces appareils sontutilisés en mode chauffage par inversion du cycle frigorifique, le prEN 255-1 s'applique.
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations
General Information
- Status
- Withdrawn
- Publication Date
- 18-Feb-1997
- Withdrawal Date
- 12-May-2004
- Technical Committee
- CEN/TC 113 - Heat pumps and air conditioning units
- Drafting Committee
- CEN/TC 113 - Heat pumps and air conditioning units
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 13-May-2004
- Completion Date
- 13-May-2004
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 814-1:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations". This standard covers: This standard specifies the terms and definitions for the rating and performance of air and water cooled air conditioners, air/air and water/air heatpumps with electrically driven compressors as well as the properties of the units when used in cooling mode. When these units are used in heating mode by reversing the refrigerating cycle, then prEN 255-1 applies. This standard applies to factory-made units which can be ducted.
This standard specifies the terms and definitions for the rating and performance of air and water cooled air conditioners, air/air and water/air heatpumps with electrically driven compressors as well as the properties of the units when used in cooling mode. When these units are used in heating mode by reversing the refrigerating cycle, then prEN 255-1 applies. This standard applies to factory-made units which can be ducted.
EN 814-1:1997 is classified under the following ICS (International Classification for Standards) categories: 01.040.23 - Fluid systems and components for general use (Vocabularies); 23.120 - Ventilators. Fans. Air-conditioners; 91.140 - Installations in buildings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 814-1:1997 has the following relationships with other standards: It is inter standard links to EN 14511-1:2004; is excused to EN 814-2:1997, EN 814-3:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 814-1:1997 is associated with the following European legislation: EU Directives/Regulations: 92/75/EEC; Standardization Mandates: M/274. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 814-1:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2001
Air conditioners and heat pumps with electrically driven compressors - Cooling
mode - Part 1: Terms, definitions and designations
Air conditioners and heat pumps with electrically driven compressors - Cooling mode -
Part 1: Terms, definitions and designations
Luftkonditionierer und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Kühlen
- Teil 1: Benennungen, Definitionen und Bezeichnungen
Climatiseurs et pompes a chaleur avec compresseur entraîné par moteur électrique -
Mode réfrigération - Partie 1: Termes, définitions et désignations
Ta slovenski standard je istoveten z: EN 814-1:1997
ICS:
01.040.23 7HNRþLQVNLVLVWHPLLQVHVWDYQL Fluid systems and
GHOL]DVSORãQRUDER 6ORYDUML components for general use
(Vocabularies)
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
27.080 7RSORWQHþUSDONH Hea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...