EN 814-2:1997
(Main)Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking
This part of EN 814 specifies methods for testing and reporting of the rating and specifies requirements for marking of air and water cooled air conditioners,air/air and water/air heat pumps with electrically driven compressors when used in cooling mode. When these units are used in heating mode by reversing the refrigerating cycle, then prEN 255-2 applies. This standard applies to factory- made units which can be ducted.
Luftkonditionierer und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Kühlen - Teil 2: Prüfungen und Anforderungen an die Kennzeichnung
Dieser Teil der EN 814 legt Verfahren zur Prüfung und Angabe der Leistung fest und enthält Anforderungen an die Kennzeichnungen von luft- und wassergekühltenLuftkonditionieren, Luft/Luft- und Wasser/Luft-Wärmepumpen mit elektrisch angetrieben Verdichtern zum Kühlen. Werden diese Geräte durch Umschalten des Kältekreislaufs zum Heizen eingesetzt, dann gilt prEN 255-2.
Climatiseurs et pompes à chaleur avec compresseur entraîné par moteur électrique - Mode réfrigération - Partie 2: Essais et exigences de marquage
La présente partie de l'EN 814 spécifie les méthodes d'essai des performances, la manière d'exprimer ces performances, et les exigences de marquage des clima- tiseurs à condensation par air et à condensation par eau et des pompes à chaleurair/air et eau/air avec compresseur entraîné par moteur électrique, lorsqu'ils sont utilisés en mode réfrigération. Lorsque ces appareils sont utilisés en mode chauffage par inversion du cycle frigorifique, le prEN 255-2 s'applique.
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking
General Information
- Status
- Withdrawn
- Publication Date
- 18-Feb-1997
- Withdrawal Date
- 12-May-2004
- Technical Committee
- CEN/TC 113 - Heat pumps and air conditioning units
- Drafting Committee
- CEN/TC 113 - Heat pumps and air conditioning units
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 13-May-2004
- Completion Date
- 13-May-2004
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 814-2:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking". This standard covers: This part of EN 814 specifies methods for testing and reporting of the rating and specifies requirements for marking of air and water cooled air conditioners,air/air and water/air heat pumps with electrically driven compressors when used in cooling mode. When these units are used in heating mode by reversing the refrigerating cycle, then prEN 255-2 applies. This standard applies to factory- made units which can be ducted.
This part of EN 814 specifies methods for testing and reporting of the rating and specifies requirements for marking of air and water cooled air conditioners,air/air and water/air heat pumps with electrically driven compressors when used in cooling mode. When these units are used in heating mode by reversing the refrigerating cycle, then prEN 255-2 applies. This standard applies to factory- made units which can be ducted.
EN 814-2:1997 is classified under the following ICS (International Classification for Standards) categories: 23.120 - Ventilators. Fans. Air-conditioners. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 814-2:1997 has the following relationships with other standards: It is inter standard links to EN 14511-2:2004, EN 14511-3:2004; is excused to EN 814-1:1997, EN 810:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 814-2:1997 is associated with the following European legislation: EU Directives/Regulations: 92/75/EEC; Standardization Mandates: M/274. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 814-2:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for markingLuftkonditionierer und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Kühlen - Teil 2: Prüfungen und Anforderungen an die KennzeichnungClimatiseurs et pompes a chaleur avec compresseur entraîné par moteur électrique - Mode réfrigération - Partie 2: Essais et exigences de marquageAir conditioners and heat pumps with electrically driven compressors -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...