EN 15682-2:2013
(Main)Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
Glas im Bauwesen - Heißgelagertes thermisch vorgespanntes Erdalkali-Silicat-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm
Diese Europäische Norm legt Anforderungen, die Konformitätsbewertung und die werkseigene Produktions-kontrolle von heißgelagertem thermisch vorgespanntem Erdalkali Silicat Einscheibensicherheitsglas zur Verwendung im Bauwesen fest.
Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungs-anwendungen, können andere Richtlinien, z. B. die Niederspannungsrichtlinie, gelten.
Verre dans la construction - Verre de silicate alcalinoterreux de sécurité trempé et traité Heat Soak - Partie 2 : Evaluation de la conformité/Norme de produit
La présente Norme européenne spécifie des exigences relatives à l'évaluation de la conformité et au contrôle de la production en usine du verre de silicate alcalino-terreux de sécurité trempé et traité Heat Soak, utilisé dans la construction.
Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de chauffage par exemple, d'autres directives, comme par exemple la Directive « Basses tensions », peuvent s'appliquer.
Steklo v gradbeništvu - HS-preskus kaljenega zemljoalkalijskega silikatnega varnostnega stekla - 2. del: Vrednotenje skladnosti/standard za izdelek
Ta evropski standard določa zahteve, vrednotenje skladnosti in kontrolo proizvodnje v obratu ploskega HS-preskušenega kaljenega zemljoalkalijskega silikatnega varnostnega stekla, ki se uporablja v gradbeništvu. Za steklene izdelke z električno napeljavo ali priključki za npr. alarmne ali grelne namene se lahko uporabljajo druge direktive, npr. direktiva o nizki napetosti.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - HS-preskus kaljenega zemljoalkalijskega silikatnega varnostnega stekla - 2. del: Vrednotenje skladnosti/standard za izdelekGlas im Bauwesen - Heißgelagertes thermisch vorgespanntes Erdalkali-Silicat-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/ProduktnormVerre dans la construction - Verre de silicate alcalinoterreux de sécurité trempé et traité Heat Soak - Partie 2 : Evaluation de la conformité/Norme de produitGlass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 15682-2:2013SIST EN 15682-2:2013en,fr,de01-november-2013SIST EN 15682-2:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15682-2
July 2013 ICS 81.040.20 English Version
Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
Verre dans la construction - Verre de silicate alcalinoterreuxde sécurité trempé et traité Heat Soak - Partie 2 : Evaluation de la conformité/Norme de produit
Glas im Bauwesen - Heißgelagertes thermisch vorgespanntes Erdalkali-Silicat-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm This European Standard was approved by CEN on 30 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15682-2:2013: ESIST EN 15682-2:2013
Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Requirements .6 4.1 Product description .6 4.2 Conformity with the definition of heat soaked thermally toughened alkaline earth silicate safety glass .7 4.3 Determination of the characteristic’s performances .7 4.3.1 Characteristics of heat soaked thermally toughened alkaline earth silicate safety glass .7 4.3.2 Determination of characteristics of heat soaked thermally toughened alkaline earth silicate safety glass products .8 4.4 Durability . 10 4.5 Dangerous substances . 11 5 Evaluation of conformity . 11 5.1 General . 11 5.2 Initial type testing of the product (see 5.1, b)) . 11 5.2.1 General . 11 5.2.2 Initial type testing of heat soaked thermally toughened alkaline earth silicate safety glass . 12 5.2.3 Initial type testing of characteristic’s performances . 15 5.3 Factory production control and inspection of samples in accordance with a prescribed test plan (see 5.1, a) 1)) . 15 5.4 Initial inspection of factory and of factory production control (see 5.1, a) 2)) . 15 5.5 Continuous surveillance and assessment of the factory production control (see 5.1, a) 3)) . 16 6 Marking and/or labelling . 17 6.1 General . 17 6.2 Product marking . 17 6.3 Product characteristics . 17 6.4 “Characteristics/performance identification paper” . 17 Annex A (normative)
Factory production control . 18 A.1 Factory production control requirements . 18 A.1.1 General . 18 A.1.2 Organisation . 18 A.1.3 Control system . 18 A.2 Marking . 19 A.3 Inspection and testing tables of heat soaked thermally toughened alkaline earth silicate safety glass production . 19 A.3.1 Information on Table A.1 . 19 A.3.2 Production control . 20 A.3.3 Product control . 20 A.3.4 Use of proxy testing . 20 Annex B (normative)
Tests for factory production control . 24 B.1 Strength measurement . 24 B.1.1 Four point bending strength test . 24 B.1.2 Optical surface pre-stress measurement . 24 B.2 Fragmentation test. 25 B.2.1 Requirements . 25 SIST EN 15682-2:2013
Provisions for voluntary involvement of third party(ies) . 26 C.1 General . 26 C.2 Voluntary tasks for third parties . 26 C.3 Marking and labelling . 26 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of EU Construction Products Directive . 27 ZA.1 Scope and relevant characteristics . 27 ZA.2 Procedure(s) for the attestation of conformity of heat soaked thermally toughened alkaline earth silicate safety glass products . 29 ZA.2.1 System(s) of attestation of conformity. 29 ZA.2.2 EC Certificate and Declaration of Conformity . 31 ZA.3 CE marking and labelling . 32 Bibliography . 35
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.