EN 10250-2:1999
(Main)Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
This Part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition.
Freiformschmiedestücke aus Stahl für allgemeine Verwendung - Teil 2: Unlegierte Qualitäts- und Edelstähle
Dieser Teil dieser Europäischen Norm legt die technischen Lieferbedingungen für Freiformschmiedestücke, geschmiedete Stäbe sowie für vorgeschmiedete und in Ringwalzwerken fertigumgeformte Erzeugnisse fest, die aus unlegierten Qualitäts- und Edelstählen gefertigt und im normalgeglühten, im normalgeglühten und angelassenen, im vergüteten oder im weichgeglühten Zustand geliefert werden.
Pièces forgées en acier pour usage général - Partie 2: Aciers de qualité non alliés et aciers spéciaux
La présente partie de la présente norme européenne spécifie les conditions techniques de livraison des pièces obtenues par forgeage libre, des barres forgées et des produits pré-forgés et finis par laminage circulaire, fabriqués en acier spécial et en acier de qualité non allié et livrés à l'état normalisé, normalisé et revenu, trempé et revenu ou recuit.
Prosto kovani jekleni izkovki za splošno tehnično uporabo - 2. del: Nelegirana kakovostna in plemenita jekla
General Information
- Status
- Withdrawn
- Publication Date
- 19-Oct-1999
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ECISS/TC 111 - Steel castings and forgings
- Drafting Committee
- ECISS/TC 28 - Steel forgings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Mar-2022
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10250-2:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels". This standard covers: This Part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition.
This Part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition.
EN 10250-2:1999 is classified under the following ICS (International Classification for Standards) categories: 77.140.20 - Stainless steels; 77.140.85 - Iron and steel forgings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10250-2:1999 has the following relationships with other standards: It is inter standard links to EN 10250-2:2022, EN ISO 6506-1:2014, EN 12480:2018, EN 13611:2019, EN 13611:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10250-2:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10250-2:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Freiformschmiedestücke aus Stahl für allgemeine Verwendung - Teil 2: Unlegierte Qualitäts- und EdelstählePieces forgées en acier pour usage général - Partie 2: Aciers de qualité non alliés et aciers spéciauxOpen die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels77.140.85Železni in jekleni kovani izdelkiIron and steel forgings77.140.45Nele
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...