iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10250-2:1999

(Main)

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

This Part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition.

Freiformschmiedestücke aus Stahl für allgemeine Verwendung - Teil 2: Unlegierte Qualitäts- und Edelstähle

Dieser Teil dieser Europäischen Norm legt die technischen Lieferbedingungen für Freiformschmiedestücke, geschmiedete Stäbe sowie für vorgeschmiedete und in Ringwalzwerken fertigumgeformte Erzeugnisse fest, die aus unlegierten Qualitäts- und Edelstählen gefertigt und im normalgeglühten, im normalgeglühten und angelassenen, im vergüteten oder im weichgeglühten Zustand geliefert werden.

Pièces forgées en acier pour usage général - Partie 2: Aciers de qualité non alliés et aciers spéciaux

La présente partie de la présente norme européenne spécifie les conditions techniques de livraison des pièces obtenues par forgeage libre, des barres forgées et des produits pré-forgés et finis par laminage circulaire, fabriqués en acier spécial et en acier de qualité non allié et livrés à l'état normalisé, normalisé et revenu, trempé et revenu ou recuit.

Prosto kovani jekleni izkovki za splošno tehnično uporabo - 2. del: Nelegirana kakovostna in plemenita jekla

General Information

Status
Withdrawn
Publication Date
19-Oct-1999
Withdrawal Date
29-Mar-2022
ICS
77.140.20 - Stainless steels
77.140.85 - Iron and steel forgings
Technical Committee
ECISS/TC 111 - Steel castings and forgings
Drafting Committee
ECISS/TC 28 - Steel forgings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
30-Mar-2022
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 10250-2:2000 - Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels

Relations

Replaced By
EN 10250-2:2022 - Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
Effective Date
08-Jun-2022

Buy Standard

EN 10250-2:2000EN 10250-2:2000
PreviousNext
Standard
EN 10250-2:2000
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Freiformschmiedestücke aus Stahl für allgemeine Verwendung - Teil 2: Unlegierte Qualitäts- und EdelstählePieces forgées en acier pour usage général - Partie 2: Aciers de qualité non alliés et aciers spéciauxOpen die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels77.140.85Železni in jekleni kovani izdelkiIron and steel forgings77.140.45Nele
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
SIST EN 10250-3:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition.
The majority of steels listed in this document are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
SIST EN 10250-4:2021

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures.
NOTE The majority of steels listed in this part of EN 10250 are identical to steels specified EN 10088-3 and EN 10028-7, and more extensive information on properties is given in these European Standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
SIST EN 10250-3:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition.
The majority of steels listed in this document are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
SIST EN 10250-4:2021

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures.
NOTE The majority of steels listed in this part of EN 10250 are identical to steels specified EN 10088-3 and EN 10028-7, and more extensive information on properties is given in these European Standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1888-3:2024(Main)
Child care articles - Wheeled child conveyances - Part 3: Pushchairs intended for leisure sport activities
kSIST FprEN 1888-3:2024

This document specifies the safety requirements of pushchairs when used for running/jogging or skating (excluding ice skating), intended for the transport of one or two children up to 15 or 22 kg each.
Pushchairs intended to transport the carer while pushing (e.g. the combination of longboard and stroller) are excluded from the scope of this document.
This document applies in conjunction with and in addition to the European standards EN 1888 1:2018+A1:2022 or EN 1888-2:2018+A1:2022 and it cannot be used separately.
If the product has several functions or can be converted into another function, the relevant European standards apply to it.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15877-1:2024(Main)
Railway applications - Markings of railway vehicles - Part 1: Freight wagons
kSIST FprEN 15877-1:2024

This document specifies the markings on heavy rail freight wagons, or parts of heavy rail freight wagons, relating to their technical, operational and maintenance characteristics. It specifies the characteristics of these markings, the requirements pertaining to their presentation, their shape and position on a rail vehicle and their meaning. Some markings are accompanied with (a) note(s), where appropriate.
Tank manufacturers’ design criteria, test and product specification plates have not been considered in this document as they are specified in EN 12561 1:2011.
Where fully specified in RID [14] dangerous goods markings have not been considered in this document (dimensions, colour, location and form). Where markings are not fully specified in RID they are included in this document.

  • Draft
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2884:2024(Main)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
kSIST FprEN 2884:2024

This document specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated.
Classification: 1 100 MPa /315 °C ·

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12159:2024(Main)
Builders hoists for persons and materials with vertically guided cages
kSISTF prEN 12159:2022

1.1   This document specifies power operated temporarily installed builders’ hoists (referred to as “hoists” in this document) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a cage:
-   designed for the transportation of persons or of persons and materials;
-   guided;
-   travelling vertically or along a path within 15° max. of the vertical;
-   supported or sustained by rack and pinion;
-   designed with and / or without support from separate structure.
1.2   This document specifies the significant hazards, hazardous situations or hazardous events relevant to the machine as listed in Annex C which arise during the various phases in the life of the machine and describes methods for the elimination or reduction of these hazards when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
1.3   This document does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   emission of airborne noise;
-   dual (twin) cage hoists;
-   twin masts hoists;
-   combination hoists, e.g. an EN 12159 hoist with an EN 12158-1 hoist;
-   counterweighted hoists, neither by separate counterweight nor counterweighted by another cage.
1.4   This document does not apply to:
-   builders’ hoists for the transport of goods only EN 12158-1:2021 and EN 12158-2:2000+A1:2010;
-   lifts according to EN 81-20:2020, EN 81-3:2000+A1:2008 and EN 81-43:2009;
-   work cages suspended from lifting appliances;
-   work platforms carried on the forks of fork trucks;
-   work platforms according to EN 1495:1997+A2:2009  ;
-   transport platforms according to EN 16719:2018;
-   funiculars;
-   lifts specially designed for military purposes;
-   mine lifts;
-   theatre elevators;
-   hoists with hydraulic drive/braking systems and hydraulic safety devices.
1.5   This document specifies the hoist installation. It includes the base frame and base enclosure but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties but excludes the design of anchor bolts to the supporting structure. It includes the landing gates and their frames but excludes the design of any anchorage fixing bolts to the supporting structure.
1.6   This document does not apply to builders’ hoists for persons and material with vertically guided cages which are manufactured before the date of publication of this document by CEN.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4013:2024(Main)
Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C
kSIST FprEN 4013 rev:2024

This document specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa /600 °C .

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13991:2024(Main)
Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods
kSIST FprEN 13991:2024

This document specifies the requirements and the test methods for creosotes for industrial wood preservation.
Different grades of creosote are used depending on the desired properties of the treated wood.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document cannot address all of the safety implications associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and assess the applicability of regulatory limitations prior to use. The warnings to use are covered in Annex C.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day