iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14587-3:2012

(Main)

Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction

Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction

This European Standard specifies requirements for the approval of a welding process in a fixed plant, together with the requirements for subsequent welding production.
This European Standard applies to new Vignole rails welded by flash butt welding to crossing components in a fixed plant, and intended for use on railway infrastructures.

Bahnanwendungen - Oberbau - Abbrennstumpfschweißen von Schienen - Teil 3: Schweißen im Zusammenhang mit Herzstückkonstruktionen

Diese Europäische Norm legt die Anforderungen für die Zulassung eines Schweißverfahrens in einem Schweißwerk fest, gemeinsam mit den Anforderungen für die spätere Schweißung.
Diese Europäische Norm ist anwendbar für neue Vignol-Schienen mit in einer stationären Anlage abbrennstumpfgeschweißten Herstückkomponenten, die für den Einsatz in der Eisenbahn-Infrastruktur vorgesehen sind.

Applications ferroviaires - Voie - Soudage des rails par étincelage - Partie 3: Soudure associée à la fabrication des coeurs de voie

La présente norme européenne spécifie les exigences pour l'homologation d'un procédé de soudage dans une installation fixe, ainsi que les exigences pour les soudures de production.
La présente norme européenne s’applique aux rails Vignole neufs soudés par étincelage à des composants d’appareil de voie dans une installation fixe et destinés à des infrastructures ferroviaires.

Železniške naprave - Zgornji ustroj - Elektro uporovno varjenje tirnic - 3. del: Varjenje pri izdelavi kretnic

Ta evropski standard določa zahteve za odobritev postopka varjenja v fiksnem obratu, skupaj z zahtevami za nadaljnjo varilno proizvodnjo. Uporablja se za nove tirnice Vignole, ki se varijo z elektrouporovnim varjenjem prečnih komponent v fiksnem obratu in so namenjene za uporabo v železniških infrastrukturah.

General Information

Status
Published
Publication Date
11-Sep-2012
ICS
25.160.10 - Welding processes
93.100 - Construction of railways
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/SC 1/WG 4 - Rails
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
10-Jul-2020
Directive
2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
2007/47/EC - Directive 2007/47/EC of the European Parliament and of the council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
96/48/EC - Interoperability of the trans-European high-speed rail system
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 14587-3:2012 - Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction

Buy Standard

EN 14587-3:2012EN 14587-3:2012
PreviousNext
Standard
EN 14587-3:2012
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Elektro uporovno varjenje tirnic - 3. del: Varjenje pri izdelavi kretnicBahnanwendungen - Oberbau - Abbrennstumpfschweißen von Schienen - Teil 3: Schweißen im Zusammenhang mit WeichenkonstruktionenApplications ferroviaires - Voie - Soudage des rails par étincelage - Partie 3 : Soudure associée à la fabrication des appareils de voieRailway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction93.100Gradnja železnicConstruction of railways25.160.10Varilni postopki in varjenjeWelding processesICS:Ta slovenski standard je istoveten z:EN 14587-3:2012SIST EN 14587-3:2012en,fr01-november-2012SIST EN 14587-3:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14587-3
September 2012 ICS 25.160.10; 93.100 English Version
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction
Applications ferroviaires - Voie - Soudage des rails par étincelage - Partie 3: Soudure associée à la fabrication des coeurs de voie
Bahnanwendungen - Oberbau - Abbrennstumpfschweißen von Schienen - Teil 3: Schweißen im Zusammenhang mit Herzstückkonstruktionen This European Standard was approved by CEN on 6 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14587-3:2012: ESIST EN 14587-3:2012

Example of Flat spot and Bright spot . 21Annex B (normative)
Bend test requirements . 22Annex C (normative)
Test weld fracture faces – Recording of defects . 24Annex D (normative)
Fatigue test method for flash butt welds . 26D.1 Scope . 26D.2 Test equipment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14587-2:2024(Main)
Railway applications - Infrastructure - Flash butt welding of new rails - Part 2: R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines at sites other than a fixed plant
SIST EN 14587-2:2024

This document specifies requirements for the approval of a welding process by mobile plant, together with the requirements for subsequent welding production.
It applies to new Vignole railway rails R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails of 46 kg/m and above, as contained in EN 13674-1:2011+A1:2017, welded by a flash butt welding process by mobile plant and intended for use on railway infrastructure.
This document applies to the welding of rails into welded strings.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14730-2:2021(Main)
Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
SIST EN 14730-2:2021

This document specifies requirements for the:
-   approval of training facilities, testing and maintaining the skills of aluminothermic welders and welding trainers. It applies to those aluminothermic welding processes compliant with the requirements of EN 14730-1. It requires that the system for training and testing of welders be approved by the railway authority;
-   approval of aluminothermic welding contractors. It applies to those contractors using aluminothermic welding processes compliant with the requirements of EN 14730-1 and who employ welders in the possession of a valid permit to weld as defined in Clause 4 of this document;
-   acceptance of the final aluminothermic weld inspections and aluminothermic weld inspectors approved by the railway authority. It does not cover any previous weld inspections by the welder or others.
This document also applies to aluminothermic welds produced on railway rails as contained in EN 13674-1 to EN 13674-4 and EN 16771.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14587-1:2018(Main)
Railway applications - Infrastructure - Flash butt welding of new rails - Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant
SIST EN 14587-1:2019

This document specifies requirements for the approval of a welding process in a fixed plant, together with the requirements for subsequent welding production.
It applies to new Vignole railway rails R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails of 46 kg/m and above, as contained in EN 13674 1, welded by a flash butt welding process in a fixed plant and intended for use on railway infrastructure.
This document applies to the welding of rails into welded strings.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14730-1:2017(Main)
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes
SIST EN 14730-1:2017

This European Standard defines the laboratory tests and requirements for approval of an aluminothermic welding process using welds produced in workshop conditions.
It applies to the joining of new, Vignole rails as described in EN 13674 1 of the same profile and steel grade.
Compliance with the requirements of this standard does not of itself ensure the suitability of a welding process for specific conditions of track and traffic.
The standard does not cover welds made between different rail sections, differently worn rails and different rail grades.
In addition to the definitive requirements this standard also requires the items detailed in Clause 4 to be documented. For compliance with this standard, it is important that both the definitive requirements and the documented items be satisfied.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16771:2016(Main)
Railway applications - Infrastructure - Aluminothermic welding of grooved rails
SIST EN 16771:2017

This standard defines the laboratory tests and requirements for approval of an aluminothermic welding process using welds produced in workshop conditions.
It applies to the joining of new, grooved rails as described in EN 14811 of the same profile and steel grade. Welding of construction profiles and machined profiles are not covered in this standard.
Compliance with the requirements of this standard does not in itself ensure the suitability of a welding process for specific conditions of track and traffic.
The standard does not cover welds made between different rail sections, worn rails or different rail grades.
In addition to the definitive requirements, this standard also requires the items detailed in Clause 4 to be documented. For compliance with this standard, it is important that both the definitive requirements and the documented items be satisfied.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15594:2009(Main)
Railway applications - Track - Restoration of rails by electric arc welding
SIST EN 15594:2009

This European Standard specifies restoration by electric arc welding and is limited to the head of the rails only.
This European Standard describes the approval systems for consumables and procedures used in manual metal arc and flux cored metal deposit rail repair welding. The standard includes the quality-related tasks and responsibilities of personnel involved in the electric arc repair welding of rails. The standard applies to plain rail and switches and crossings manufactured from new vignole railway rails R200, R220, R260, R260Mn and R350HT grade rails of 46 kg/m and above as contained in EN 13674-1.
The permitted welding processes are limited to Electric Arc (EA) in accordance with EN ISO 4063 and are by description Process No 111: MMA (Manual Metal Arc) and Process No 114: FCAW (Flux Cored Arc Welding). Their applications are described.
This European Standard may be applied in situ, at line side or at out of track locations. The flash welded leg ends of austenitic manganese steel crossings are included in this standard, except when located within 500 mm of manganese crossings.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14587-2(Main)
Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT
oSIST prEN 14587-2:2021

This European Standard specifies requirements for the approval of a welding process by a MFBW machine at sites other than fixed plant, as well as the welding contractor together with the requirements for subsequent welding production. Where a MFBW machine is to be used in a static but temporary situation, the requirements of this part of the standard shall apply.
It applies to new Vignole R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails of 46 kg/m and above, as contained in EN 13674-1, welded by a MFBW machine at sites other than a fixed plant and intended for use on railway infrastructures.
This European Standard applies to the welding of rails into welded strings.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14587-2:2024(Main)
Railway applications - Infrastructure - Flash butt welding of new rails - Part 2: R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines at sites other than a fixed plant
SIST EN 14587-2:2024

This document specifies requirements for the approval of a welding process by mobile plant, together with the requirements for subsequent welding production.
It applies to new Vignole railway rails R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails of 46 kg/m and above, as contained in EN 13674-1:2011+A1:2017, welded by a flash butt welding process by mobile plant and intended for use on railway infrastructure.
This document applies to the welding of rails into welded strings.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14730-2:2021(Main)
Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
SIST EN 14730-2:2021

This document specifies requirements for the:
-   approval of training facilities, testing and maintaining the skills of aluminothermic welders and welding trainers. It applies to those aluminothermic welding processes compliant with the requirements of EN 14730-1. It requires that the system for training and testing of welders be approved by the railway authority;
-   approval of aluminothermic welding contractors. It applies to those contractors using aluminothermic welding processes compliant with the requirements of EN 14730-1 and who employ welders in the possession of a valid permit to weld as defined in Clause 4 of this document;
-   acceptance of the final aluminothermic weld inspections and aluminothermic weld inspectors approved by the railway authority. It does not cover any previous weld inspections by the welder or others.
This document also applies to aluminothermic welds produced on railway rails as contained in EN 13674-1 to EN 13674-4 and EN 16771.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14587-1:2018(Main)
Railway applications - Infrastructure - Flash butt welding of new rails - Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant
SIST EN 14587-1:2019

This document specifies requirements for the approval of a welding process in a fixed plant, together with the requirements for subsequent welding production.
It applies to new Vignole railway rails R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails of 46 kg/m and above, as contained in EN 13674 1, welded by a flash butt welding process in a fixed plant and intended for use on railway infrastructure.
This document applies to the welding of rails into welded strings.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day