Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)

Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte Abwasserkanäle und -leitungen - Prüfverfahren zur Bestimmung der Widerstandsfähigkeit gegen Temperaturwechsel und gleichzeitige äußere Belastung - Änderung 1 (ISO 13260:2010/Amd 1:2017)

Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Méthode d'essai de la résistance à un cycle de température et de charge externe combinés - Amendement 1 (ISO 13260:2010/Amd 1:2017)

Cevni sistemi iz polimernih materialov za odpadno vodo in kanalizacijo, ki delujejo po težnostnem principu in so položeni v zemljo - Preskusna metoda za ugotavljanje odpornosti proti kombinaciji izmenične temperaturne in sočasne zunanje obremenitve (ISO 13260:2011/Amd 1:2017)

General Information

Status
Published
Publication Date
26-Sep-2017
Withdrawal Date
30-Mar-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Sep-2017
Completion Date
27-Sep-2017

Relations

Buy Standard

Amendment
EN ISO 13260:2011/A1:2017
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2017
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DRGSDGQRYRGRLQNDQDOL]DFLMRNLGHOXMHMR
SRWHåQRVWQHPSULQFLSXLQVRSRORåHQLY]HPOMR3UHVNXVQDPHWRGD]D
XJRWDYOMDQMHRGSRUQRVWLSURWLNRPELQDFLMLL]PHQLþQHWHPSHUDWXUQHLQVRþDVQH
]XQDQMHREUHPHQLWYH ,62$PG
Thermoplastics piping systems for non-pressure underground drainage and sewerage -
Test method for resistance to combined temperature cycling and external loading -
Amendment 1 (ISO 13260:2011/Amd 1:2017)
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte Abwasserkanäle und
-leitungen - Prüfverfahren zur Bestimmung der Widerstandsfähigkeit gegen
Temperaturwechsel und gleichzeitige äußere Belastung (ISO 13260:2011/Amd 1:2017)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs
d'assainissement enterrés sans pression - Méthode d'essai de la résistance à un cycle
de température et de charge externe combinés - Amendement 1 (ISO 13260:2011/Amd
1:2017)
Ta slovenski standard je istoveten z: EN ISO 13260:2011/A1:2017
ICS:
23.040.05 Cevovodi za zunanje Pipeline and its parts for
sisteme za odpadno vodo in external sewage systems
njihovi deli
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 13260:2011/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2017
EUROPÄISCHE NORM
ICS 23.040.45; 91.140.80; 23.040.20; 93.030
English Version
Thermoplastics piping systems for non-pressure
underground drainage and sewerage - Test method for
resistance to combined temperature cycling and external
loading - Amendment 1 (ISO 13260:2011/Amd 1:2017)
Systèmes de canalisations thermoplastiques pour Kunststoff-Rohrleitungssysteme aus Thermoplasten
branchements et collecteurs d'assainissement enterrés für erdverlegte Abwasserkanäle und -leitungen -
sans pression - Méthode d'essai de la résistance à un Prüfverfahren zur Bestimmung der
cycle de température et de charge externe combinés - Widerstandsfähigkeit gegen Temperaturwechsel und
Amendement 1 (ISO 13260:2011/Amd 1:2017) gleichzeitige äußere Belastung - Änderung 1 (ISO
13260:2011/Amd 1:2017)
This amendment A1 modifies the European Standard EN ISO 13260:2011; it was approved by CEN on 12 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13260:2011/A1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 13260:2011/A1:2017) has been prepared by Technical Committee ISO/TC 138
“Plastics pipes, fittings and valves for the transport of fluids” in collaboration with Technical Committee
CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN.
This Amendment to the European Standard EN ISO 13260:2011 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2018, and
conflicting national standards shall be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regul
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.