ASTM F1347-23

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1347 − 23 An American National Standard
Standard Specification for
1
Manually Operated Fueling Hose Reels
This standard is issued under the fixed designation F1347; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope MIL-T-16366 Terminals, Electric Lug and Conductor
Splices, Crimp Style
1.1 This specification covers manually operated fueling
MIL-H-17902 Hose, End Fittings and Hose Assemblies,
hose reels for use with collapsible and noncollapsible hose.
Synthetic Rubber, Aircraft Fuels
1.2 The values stated in inch-pound units are to be regarded
MIL-F-20042 Flanges, Pipe and Bulkhead, Bronze (Silver
as standard. The values given in parentheses are mathematical
Brazing)
conversions to SI units that are provided for information only
MIL-P-24441 Epoxy-Polyamide Primer
4
and are not considered standard.
2.3 Military Standard:
1.3 The following precautionary caveat pertains only to the
MIL-STD-130 Identification Marking of U.S. Military Prop-
test methods portion, Section 12 of this specification: This erty
standard does not purport to address all of the safety concerns,
3. Classification
if any, associated with its use. It is the responsibility of the user
of this standard to establish appropriate safety, health, and
3.1 Fueling hose reels shall be of one of the following types
environmental practices and determine the applicability of
as specified:
1
regulatory limitations prior to use.
3.1.1 Type 1—For 150 ft (46 m) of collapsible 2 ⁄2-in.
1.4 This international standard was developed in accor-
(65-mm) hose.
1
dance with internationally recognized principles on standard-
3.1.2 Type 2—For 150 ft (46 m) of noncollapsible 1 ⁄2-in.
ization established in the Decision on Principles for the
(38-mm) hose or 100 ft (30 m) of noncollapsible 2-in. (50-mm)
Development of International Standards, Guides and Recom-
hose.
1
mendations issued by the World Trade Organization Technical
3.1.3 Type 3—For 150 ft (46 m) of noncollapsible 1 ⁄2-in.
1
Barriers to Trade (TBT) Committee.
(38-mm) hose or for 150 ft (46 m) of collapsible 2 ⁄2-in.
(65-mm) hose.
2. Referenced Documents
3.1.4 Type 4—Capacity as specified by purchaser.
2
2.1 ASTM Standards:
4. Ordering Information
B148 Specification for Aluminum-Bronze Sand Castings
D3006 Specification for Polyethylene Plastic Pressure-
4.1 Orders for material under this specification shall include
3
Sensitive Electrical Insulating Tape (Withdrawn 2022)
the following information:
D3951 Practice for Commercial Packaging
4.1.1 Title, number, and year of issue of this specification,
4
2.2 Military Specifications:
4.1.2 Type of hose reel including hose size and type (see
MIL-S-901 Shock Test, H.I. (High-Impact); Shipboard
3.1), (length of hose for Type 4),
Machinery, Equipment and Systems, Requirements for
4.1.3 Whether right- or left-hand reels are required (see 6.5),
4.1.4 Flange inlet thickness and bolt hole dimensions (see
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships
6.7),
and Marine Technology and is the direct responsibility of Subcommittee F25.07 on
4.1.5 Drawings required (see 9.1),
General Requirements.
4.1.6 The number of samples to be inspected and tested (see
Current edition approved May 1, 2023. Published June 2023. Originally
approved in 1991. Last previous edition approved in 2018 as F1347 – 91 (2018).
11.2),
DOI: 10.1520/F1347-23.
4.1.7 Certification, if required (see 15.1),
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
4.1.8 Test report, if required (see 15.1), and
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
4.1.9 Applicability of supplementary requirements.
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
3
The last approved version of this historical standard is referenced on 5. Materials and Manufacture
www.astm.org.
4 5.1 Except as otherwise specified herein, the hose reels shall
Available from DLA Document Services, Building 4/D, 700 Robbins Ave.,
Philadelphia, PA 19111-5094, http://quicksearch.dla.mil. be constructed of aluminum, aluminum bronze, or other
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1347 − 23
suitable nonsparking materials. All fittings c
...