71.100.20 - Gases for industrial application
Gases for industrial application
Technische Gase
Gaz pour les applications industrielles
Industrijski plini
General Information
ISO 10298:2018 lists the best available acute-toxicity data of gases taken from a search of the current literature to allow the classification of gases and gas mixtures for toxicity by inhalation.
- Standard23 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft20 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 13338:2017 provides:
- for pure gases and some liquids, a complete list indicating their corrosiveness;
- for gas mixtures, a calculation method, in the absence of experimental data, relating to the corrosiveness of each of their components;
in order to determine the corrosiveness of gases and gas mixtures on tissue so that a suitable outlet connection can be assigned to each of them.
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
This International Standard specifies the requirements for design, manufacture and testing of cylinders, tubes, and other pressure vessels of steel, stainless steel, aluminium alloys or of non-metallic construction material intended for the stationary storage of gaseous hydrogen of up to a maximum water capacity of 10 000 l and a maximum allowable working pressure not exceeding 110 MPa, of seamless metallic construction (Type 1) or of composite construction (Types 2, 3 and 4) without any non-sea...view more
- Standard77 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft72 pagesEnglish language
sale 10% off- e-Library read for1 day
EN-ISO 17268 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors.GHLV refuelling connectors consist of the following components, as applicable:- receptacle and protective cap (mounted on vehicle);- nozzle;- communication hardware.This document is applicable to refuelling connectors which have nominal working pressures or hydrogen service levels up to 70 MPa.This document is not applicable to refuelling connectors dispensing blend...view more
- Standard53 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft49 pagesEnglish language
sale 10% off- e-Library read for1 day
This document defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles). This document is not applicable to the dispensing of cryogenic hydrogen, or hydrogen to metal hydride applications. Since this document is intended to provide minimum requirements...view more
- Standard173 pagesEnglish language
sale 15% off
This document defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors.
GHLV refuelling connectors consist of the following components, as applicable:
— receptacle and protective cap (mounted on vehicle);
— nozzle;
— communication hardware.
This document is applicable to refuelling connectors which have nominal working pressures or hydrogen service levels up to 70 MPa.
This document is not applicable to refuelling connectors dis...view more
- Standard53 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft49 pagesEnglish language
sale 10% off- e-Library read for1 day
This document defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors. GHLV refuelling connectors consist of the following components, as applicable: — receptacle and protective cap (mounted on vehicle); — nozzle; — communication hardware. This document is applicable to refuelling connectors which have nominal working pressures or hydrogen service levels up to 70 MPa. This document is not applicable to refuelling connectors dispensin...view more
- Standard47 pagesFrench language
sale 15% off- Standard45 pagesEnglish language
sale 15% off
This document specifies the minimum quality characteristics of hydrogen fuel as distributed for utilization in vehicular and stationary applications. It is applicable to hydrogen fuelling applications, which are listed in Table 1.
- Standard17 pagesEnglish language
sale 15% off
This document specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of −40 °C to 65 °C. This document contains safety requirements for material, design, manufacture and testing of gaseous hydrogen hose and hose assemblies for hydrogen fuelling stations. Hoses and hose assemblies excluded from the scope of this document are the following: 1) those used as part o...view more
- Standard27 pagesEnglish language
sale 15% off
This document specifies the protocol for ensuring the quality of the gaseous hydrogen at hydrogen distribution facilities and hydrogen fuelling stations for proton exchange membrane (PEM) fuel cells for road vehicles.
- Standard39 pagesEnglish language
sale 15% off
This document defines the construction, safety, and performance requirements of modular or factory-matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen. This document is applicable to hydrogen generators that use the following types of ion transport medium: — group of aqueous bases; — group of aqueous acids; — solid polymeric materials with acidic function group additions, such as acid prot...view more
- Standard48 pagesEnglish language
sale 15% off
This document specifies the validation protocol of analytical methods used for ensuring the quality of the gaseous hydrogen (H2) at hydrogen distribution bases and hydrogen fuelling stations for road vehicles using proton exchange membrane (PEM) fuel cells. It also gives recommendations on the calculation of an uncertainty budget for the amount fraction. This document is established mainly for analysis done in laboratories after the sampling of hydrogen either at hydrogen distribution bases or a...view more
- Standard17 pagesFrench language
sale 15% off- Standard17 pagesEnglish language
sale 15% off
This document provides a method for sampling compressed air and a guide for choosing suitable measuring equipment to determine its particle size and concentration by number (to be referenced as "concentration" throughout this document). It also describes the limitations of the various measurement methods and describes the evaluation and uncertainty considerations. This document will report the particle size and concentration of all types of particle combined and does not aim to be able to segreg...view more
- Standard26 pagesFrench language
sale 15% off- Standard26 pagesEnglish language
sale 15% off
This document defines the minimum requirements to ensure the interoperability of public hydrogen
refuelling points including refuelling protocols that dispense gaseous hydrogen to road vehicles (e.g. Fuel
Cell Electric Vehicles) complying with applicable regulations.
The safety and performance requirements for the entire hydrogen refuelling station (HRS), addressed in
accordance with existing relevant European and national legislation, are not included in this document.
NOTE Guidance on con...view more
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
This document contains requirements for the material, design, manufacture, marking and testing of serially produced, refillable containers intended only for the storage of compressed hydrogen gas for land vehicle operation. These containers a) are permanently attached to the vehicle, b) have a capacity of up to 1 000 l water capacity, and c) have a nominal working pressure that does not exceed 70 MPa. The scope of this document is limited to fuel containers containing fuel cell grade hydrogen ac...view more
- Standard53 pagesEnglish language
sale 15% off
This document specifies the quality characteristics of hydrogen fuel and the corresponding quality assurance in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.
- Standard30 pagesEnglish language
sale 10% off- e-Library read for1 day
This document defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as "metal hydride assemblies" (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa. This document is applicable to refillable storage MH assemblies where hydrogen is the only transferred media. It is not applicable to storage MH assemblies intended to b...view more
- Standard43 pagesEnglish language
sale 15% off
This document provides the requirements and test methods for the safety performance of high pressure gas valves that are used in gaseous hydrogen stations of up to the H70 designation. This document covers the following gas valves: - check valve; - excess flow valve; - flow control valve; - hose breakaway device; - manual valve; - pressure safety valve; - shut-off valve.
- Standard30 pagesEnglish language
sale 15% off
This document specifies methods for determining whether or not a gas or gas mixture is flammable in
air and whether a gas or gas mixture is more or less oxidizing than air under atmospheric conditions.
This document is intended to be used for the classification of gases and gas mixtures including the
selection of gas cylinder valve outlets.
This document does not cover the safe preparation of these mixtures under pressure and at
temperatures other than ambient.
- Standard35 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 8573-2:2018 specifies test methods for the sampling and quantitative analysis of liquid oil and oil aerosols that can typically be present in compressed air. Test methods for oil vapour are excluded from this document as they are covered by ISO 8573‑5. Two different methods are described, Method A and Method B. Method B is subdivided into two parts to clearly distinguish between procedures for obtaining the quantity of oil for analysis. Method A describes an oil collection technique using in...view more
- Standard46 pagesFrench language
sale 15% off- Standard45 pagesEnglish language
sale 15% off