ISO/TC 264 - Fireworks
Standardization in the field of Fireworks, including quality control, definitions, terminology, classification, categorization, labelling, test methods and basic safety requirements.
Artifices de divertissement
Normalisation dans le domaine des artifices de divertissement, comprenant le contrôle de la qualité, les définitions, la terminologie, la classification, la catégorisation, l'étiquetage, les méthodes d'essai et les exigences fondamentales de sécurité.
General Information
This document specifies the method for the determination of the content of lead and lead compounds in pyrotechnic compositions of fireworks by Inductive coupled plasma spectrometry.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
- Draft4 pagesEnglish languagesale 15% off
This document specifies the method for the determination of the content of lead and lead compounds in pyrotechnic compositions of fireworks by X-ray fluorescence spectrometry (XRF).
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Draft3 pagesEnglish languagesale 15% off
This document specifies the test method for the determination of the mercury content in pyrotechnic compositions by hydride generation atomic fluorescence spectrometry.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
This document specifies the method for determination of the nitrogen content in nitrocellulose within pyrotechnic compositions of fireworks by iron(II) sulphate titration.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
This document specifies the qualitative and quantitative analysis methods for the determination of the presence and content of zirconium with a particle size of less than 40 µm in pyrotechnic compositions by specific colour-rendering reactions and Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), with a minimum detection limit of 100 mg/kg. The determination of the presence of zirconium with a particle size of less than 40 µm is required for application of ISO 25947-5. Quantitative analysis may bring complementary information if necessary.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
This document specifies the qualitative and quantitative analysis methods for the determination of the chlorates content in pyrotechnic compositions by chemical titration analysis, with the minimum detection limit (Cl O3-1) of 1 000 mg/kg.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
This document specifies the test method for the determination of the arsenic content in pyrotechnic compositions by hydride generation -atomic fluorescence spectrometry
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
This document provides guidance on the operation of fireworks displays by professional teams of people with specialized knowledge. It is not applicable to the use of theatrical pyrotechnic articles on stage, in filming locations, or any other locations. It is not applicable to displays that involve only fireworks of categories 1, 2 and 3.
- Standard23 pagesEnglish languagesale 15% off
- Draft23 pagesEnglish languagesale 15% off
This document specifies the test method for determination of the lead content in pyrotechnic compositions of fireworks by flame atomic absorption spectrophotometry, with a minimum detection limit of 10 mg/kg. It is generally recommended to perform a simple preliminary qualitative test to check whether a quantitative analysis is required.
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document specifies the preparation methods of the test samples for the qualitative and quantitative analysis of specific chemical substances in fireworks. The document applies to the following substances to be tested using ISO 22863 (all parts): — hexachlorobenzene; — lead and lead compounds; — arsenic or arsenic compounds; — mercury compounds; — chlorates; — white phosphorus; — picrates or picric acid; — zirconium with a particle size of less than 40 µm; — content of nitrogen in nitrocellulose.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
This document specifies the test method for the determination of hexachlorobenzene (HCB) in pyrotechnic compositions by gas chromatography. The limit of detection depends on the substance to be determined, the equipment used, the quality of chemicals used for the extraction of the sample, and the clean-up of the extract. Under the conditions specified in this document, a limit of detection of 1 mg/kg (expressed as dry matter) can be achieved.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
ISO/TR 21865:2017 describes the relevant responsibilities of the involved manufacturers of fireworks articles and corresponding laboratories for the application of the ISO 25947 series and the ISO 26261 series. By applying this approach, a clear separation of the responsibilities of the manufacturers and the third party laboratories is achieved in order to demonstrate the conformity to the relevant safety specifications defined in these standards.
- Technical report3 pagesEnglish languagesale 15% off
ISO 25947-5:2017 specifies requirements for the construction, performance and primary packaging of fireworks of category 1, 2 and 3 of the following types: - aerial wheels; - bangers; - batteries; - batteries requiring external support; - Bengal flames; - Bengal matches; - Bengal sticks; - Christmas crackers; - combinations; - combinations requiring external support; - compound fireworks; - crackling granules; - double bangers; - double flash bangers; - flash bangers; - flash pellets; - fountains; - ground movers; - ground spinners; - hand-held sparklers; - jumping crackers; - jumping ground spinners; - mines; - mini rockets; - nezumi-hanabi; - non-hand-held sparklers; - novelty matches; - party poppers; - rockets; - Roman candles; - senko-hanabi; - serpents; - shot tubes; - snaps; - spinners; - table bombs; - throwdowns; - wheels. ISO 25947-5:2017 does not apply to articles containing pyrotechnic composition that includes any of the following substances: - arsenic or arsenic compounds; - hexachlorobenzene; - mixtures containing a mass fraction of chlorates greater than 80 %; - mixtures of chlorates with metals; - mixtures of chlorates with red phosphorus (except when used in Christmas crackers, party poppers, snaps and throwdowns); - mixtures of chlorates with potassium hexacyanoferrate(II); - mixtures of chlorates with sulfur (these mixtures are allowed for friction heads only); - mixtures of chlorates with sulfides; - lead or lead compounds; - mercury compounds; - white phosphorus; - picrates or picric acid; - potassium chlorate with a mass fraction of bromates greater than 0,15 %; - sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; - zirconium with a particle size of less than 40 µm. ISO 25947-5:2017 does not apply for theatrical pyrotechnic articles which are designed for indoor or outdoor stage use, including film and television productions or similar use.
- Standard23 pagesEnglish languagesale 15% off
- Standard24 pagesFrench languagesale 15% off
ISO 25947-1:2017 defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories 1, 2 and 3.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
ISO 25947-4:2017 specifies test methods. It is applicable to fireworks in categories 1, 2 and 3 according to ISO 25947‑2.
- Standard32 pagesEnglish languagesale 15% off
- Standard32 pagesFrench languagesale 15% off
ISO 25947-2:2017 establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories 1, 2 and 3. This document does not apply to category 4 fireworks except for Clause 4 and theatrical pyrotechnic articles which are designed for indoor and outdoor stage use, including film and television productions or similar use.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
ISO 25947-3:2017 specifies the minimum labelling requirements for the article and primary or selection packaging of fireworks of the following types: - aerial wheels; - bangers; - batteries; - batteries requiring external support; - Bengal flames; - Bengal matches; - Bengal sticks; - Christmas crackers; - combinations; - combinations requiring external support; - compound fireworks; - crackling granules; - double bangers; - double flash bangers; - flash bangers; - flash pellets; - fountains; - ground movers; - ground spinners; - hand-held sparklers; - jumping crackers; - jumping ground spinners; - mines; - mini rockets; - nezumi-hanabi; - non-hand-held sparklers; - novelty matches; - party poppers; - rockets; - Roman candles; - senko-hanabi; - serpents; - shot tubes; - snaps; - spinners; - table bombs; - throwdowns; - wheels. ISO 29547-3:2017 does not apply for theatrical pyrotechnic articles which are designed for indoor or outdoor stage use, including film and television productions or similar use.
- Standard27 pagesEnglish languagesale 15% off
- Standard35 pagesFrench languagesale 15% off
ISO 26261-1:2017 provides terminology relating to the design, construction, primary packaging and testing of category 4 fireworks.
- Standard12 pagesEnglish languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
ISO 26261-3:2017 specifies test methods for fireworks of Category 4.
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
ISO 26261-2:2017 specifies requirements for the construction, performance and protective packaging of Category 4 fireworks, as listed in ISO 26261‑1. ISO 26261-2:2017 does not apply for articles containing pyrotechnic compositions that include any of the following substances: - arsenic or arsenic compounds; - polychlorobenzenes; - lead or lead compounds (except for igniters); - mercury compounds; - white phosphorus; - picrates or picric acid. ISO 26261-2:2017 does not apply for theatrical pyrotechnic articles which are designed for indoor or outdoor stage use, including film and television productions or similar use.
- Standard12 pagesEnglish languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
ISO 26261-4:2017 specifies the minimum labelling requirements and the mandatory instructions for use for Category 4 fireworks. This document does not apply for theatrical pyrotechnic articles which are designed for indoor or outdoor stage use, including film and television productions or similar use.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off