CEN/TC 407 - Project Committee - Cylindrical helical springs made from round wire and bar - Calculation and design

This document specifies the measurement and test methods for general characteristics of cold formed helical extension springs made from round wire, excluding dynamic testing.

This document specifies the measurement and test methods for the general characteristics of cold formed helical compression springs made from round wire, excluding dynamic testing.

This document specifies the measurement and test methods for general characteristics of cold formed cylindrical helical torsion springs made from round wire, excluding dynamic testing.

This standard specifies the set of requirements that ensure the correct functioning of disc spring. These include requirements relating to the materials and manufacturing process, tolerances on dimensions and spring forces, and also the permissible relaxation and fatigue life of such springs as a function of stress.
All requirements specified here are minimum requirements.
This standard covers three dimensional series of disc springs.
NOTE   In this standard, disc springs are divided into three groups and three dimensional series. Classification into groups is based on the manufacturing process, which is a function of the material thickness. The assignment of disc springs to dimensional series is governed by the h0 /t ratio.

This standard specifies design criteria and features of disc springs, whether as single disc springs or as stacks of disc springs. It includes the definition of relevant concepts as well as design formulae, and covers the fatigue life of such springs.

This European Standard specifies the calculation and design of cold and hot coiled cylindrical helical torsion springs with a linear characteristic, made from round wire and bar of constant diameter with values according to Table 1.
(...)

This European Standard specifies the calculation and design of cold and hot coiled cylindrical helical compression springs with a linear characteristic, made from round wire and bar of constant diameter with values according to Table 1, and in respect of which the principal loading is applied in the direction of the spring axis.

This European Standard specifies the calculation and design of cold and hot coiled helical extension springs made from round wire and bar with values according to Table 1, loaded in the direction of the spring axis and operating at normal ambient temperatures.
NOTE   In cases of substantially higher or lower working temperature, it is advisable to seek the manufacturer’s advice.