iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ETS 300 459 E1:2006

(Main)

Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz and 11/12/14 GHz bands providing Low Bit Rate Data Communications (LBRDC

Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz and 11/12/14 GHz bands providing Low Bit Rate Data Communications (LBRDC

This European Telecommunication Standard (ETS) provides specifications for the standardization of the minimum required Network Control Facilities (NCF) characteristics for Maritime Mobile Earth Stations (MMESs) with both transmit and receive capabilities in order to ensure that the network operator is able to suppress and enable the transmissions from the MMESs. In particular, these facilities will allow certain interference situations, resulting from the emissions of interfering MMESs, to be terminated. This ETS defines specifications for the control facilities in an MMES network operating Low Bit Rate Data Communications (LBRDCs), as defined in ETS 300 460 [1]. This ETS deals with specifications defined in order to protect other users of the frequency spectrum from unacceptable interference.

Satelitske zemeljske postaje in sistemi (SES) – Naprave za krmiljenje omrežja (NCF) pomorskih mobilnih zemeljskih postaj (MMES), ki delujejo v frekvenčnih pasovih 1,5/1,6 GHz in 11/12/14 GHz ter zagotavljajo podatkovne komunikacije z nizkimi bitnimi hitrostmi (LBRDC)

General Information

Status
Published
Publication Date
31-Jan-2006
ICS
33.060.30 - Radio relay and fixed satellite communications systems
47.020.70 - Navigation and control equipment
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2006
Due Date
01-Feb-2006
Completion Date
01-Feb-2006
Ref Project
ETSI ETS 300 459 ed.1 (1996-05) - Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz and 11/12/14 GHz bands providing Low Bit Rate Data Communications (LBRDC

Buy Standard

ETS 300 459 E1:2006ETS 300 459 E1:2006
PreviousNext
Standard
ETS 300 459 E1:2006
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 459 E1:2006
01-februar-2006
6DWHOLWVNH]HPHOMVNHSRVWDMHLQVLVWHPL 6(6 ±1DSUDYH]DNUPLOMHQMHRPUHåMD
1&) SRPRUVNLKPRELOQLK]HPHOMVNLKSRVWDM 00(6 NLGHOXMHMRYIUHNYHQþQLK
SDVRYLK*+]LQ*+]WHU]DJRWDYOMDMRSRGDWNRYQHNRPXQLNDFLMH]
QL]NLPLELWQLPLKLWURVWPL /%5'&
Satellite Earth Stations and Systems (SES); Network Control Facilities (NCF) for
Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz and 11/12/14 GHz
bands providing Low Bit Rate Data Communications (LBRDC
Ta slovenski standard je istoveten z: ETS 300 459 Edition 1
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST ETS 300 459 E1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 459 E1:2006

---------------------- Page: 2 ----------------------

SIST ETS 300 459 E1:2006
EUROPEAN ETS 300 459
TELECOMMUNICATION May 1996
STANDARD
Source: ETSI TC-SES Reference: DE/SES-05005
ICS: 33.060.50
maritime, satellite, mobile, earth station, MES, MMES, NCF, data, LBRDC
Key words:
Satellite Earth Stations and Systems (SES);
Network Control Facilities (NCF) for
Maritime Mobile Earth Stations (MMESs) operating in the
1,5/1,6 GHz and 11/12/14 GHz bands providing
Low Bit Rate Data Communications (LBRDCs)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 459 E1:2006
Page 2
ETS 300 459: May 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 459 E1:2006
Page 3
ETS 300 459: May 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Abbreviations.7
4 Test report.7
5 Suppression of MMES transmissions .7
6 Re-enabling of MMES transmissions .8
History.9

---------------------- Page: 5 ----------------------

SIST ETS 300 459 E1:2006
Page 4
ETS 300 459: May 1996
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 459 E1:2006
Page 5
ETS 300 459: May 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Satellite Earth Stations and
Systems (SES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Transposition dates
Date of adoption of this ETS: 30 April 1996
Date of latest announcement of this ETS (doa): 31 August 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 29 February 1997
Date of withdrawal of any conflicting National Standard (dow): 29 February 1997
Further standardi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST ETS 300 740 E1:2006(Main)
Satellite Earth Stations and Systems (SES); Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC) in the Maritime Mobile Satellite Service (MMSS), not intended for distress and safety communications
ETSI ETS 300 740 ed.1 (1997-04)

This European Telecommunication Standard (ETS) provides specifications for the standardization of the characteristics of Maritime Mobile Earth Stations (MMESs) not providing those distress and safety functions required by the International Maritime Organization (IMO) with both transmit and receive capabilities in order to limit interference to radio communications services. The geostationary satellite networks referred to in this ETS operate under the Maritime Mobile Satellite Service (MMSS). The MMESs operate as part of a geostationary satellite network providing Low Bit-Rate Data Communications (LBRDC). The MMESs could consist of a number of modules including a keyboard interface to the user.
The main specifications are contained in three categories related to:
- safety: to protect persons from potentially dangerous RF power densities;
- unwanted emissions: to protect terrestrial and satellite radio services from harmful interference;
- MMES control and monitoring: to specify a minimum set of Control and Monitoring Functions (CMF) to be implemented on each MMES in order to minimize the probability that they originate unwanted transmissions that may give rise to harmful interference to other systems.
Additionally to these specifications the satellite operator may require other specifications or different limits.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 340 V2.1.1:2016(Main)
Satellite Earth Stations and Systems (SES) - Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU
ETSI EN 302 340 V2.1.1 (2016-05)

The present document applies to Earth Stations located on board Vessels (ESVs) which have the following
characteristics:
• The ESV is comprised of all the equipment, electrical and mechanical, from the antenna itself to the interface
with other communications equipment on board (usually referred to as the terrestrial interface).
• The ESV transmits in the frequency range from 14,00 GHz to 14,50 GHz allocated to the Fixed Satellite
Services (FSS) (earth-to-space).
• The ESV receives in one or more frequencies within the range from 10,70 GHz to 12,75 GHz in the bands
allocated to the Fixed Satellite Services (FSS) (space-to-earth), depending on the ITU Region where the ESV
is located.
• The ESV uses linear polarization.
• The ESV operates through a geostationary satellite at least 2° to 3° away from any other geostationary satellite
operating in the same frequency band and covering the same area.
NOTE 1: The satellite spacing is mainly equal to 3° in ITU Regions 1 and 3 and 2° in ITU Region 2.
The ESV transmits at elevations greater or equal to the minimum elevation angle declared by the applicant.
• The ESV antenna diameter is not smaller than 0,6 m.
NOTE 2: Operation within 125 km of non-CEPT countries with antenna diameter smaller than 1,2 m may be
subject to specific agreement with concerned administrations as stated in ITU-R Resolution 902
(WRC-03).
• The ESV is designed for transmission and reception of radio-communications signals in accordance with any
of the frequency bands specified above.
• The ESV is usually designed for unattended operation.
• The ESV is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution
and/or exchange of information between users.
• The ESV is controlled and monitored by a Network Control Facility (NCF). The NCF is outside the scope of
the present document.
The present document applies to the ESV with its ancillary equipment and its various telecommunication ports, and
when operated within the boundary limits of the operational environmental profile declared by the applicant and when
installed as required by the applicant by declaration or in the user documentation.
The present document is intended to cover the provisions of Directive 2014/53/EU [9] (RE Directive) article 3.2, which
states that "… radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio
spectrum in order to avoid harmful interference".
The present document incorporates the technical limitations listed in annex 2 of ITU-R Resolution 902 (WRC-03) [i.2].
NOTE 3: According to ITU-R Resolution 902 (WRC-03), any transmission from ESVs within the 125 km
minimum distance of each country where the ESV transmit frequency band is used by the Fixed Service
will be subject to the prior agreement of the concerned administration(s) or to the relevant ECC Decision
and may specify additional operational requirements.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Directive 2014/53 [9] (RE Directive) may apply to equipment within the scope of
the present document.
NOTE 4: A list of such ENs is included on the web site http://www.newapproach.org/.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    62 pages
    English language
    sale 15% off
SIST
SIST EN 301 447 V2.1.1:2016(Main)
Satellite Earth Stations and Systems (SES) - Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU
ETSI EN 301 447 V2.1.1 (2016-05)

The present document applies to Earth Stations located on board Vessels (ESVs) which have the following
characteristics:
• The ESV is comprised of all the equipment, electrical and mechanical, from the antenna itself to the interface
with other communications equipment on board (usually referred to as the terrestrial interface).
• The ESV transmits in the frequency range from 5 925 MHz to 6 425 MHz allocated to the Fixed Satellite
Services (FSS) (earth-to-space).
• The ESV receives in one or more frequencies within the range from 3,700 GHz to 4,200 GHz in the bands
allocated to the Fixed Satellite Services (FSS) (space-to-earth), depending on the ITU Region where the ESV
is located.
• The ESV transmits a single carrier.
• The ESV uses linear or circular polarization.
• The ESV operates through a geostationary satellite at least 2° to 3° away from any other geostationary satellite
operating in the same frequency band and covering the same area.
NOTE 1: The satellite spacing is mainly equal to 3° in ITU Regions 1 and 3 and 2° in ITU Region 2.
The ESV transmits at elevations greater or equal to the minimum elevation angle declared by the applicant.
• The ESV antenna diameter is not smaller than 2,4 m.
• The ESV is designed for transmission and reception of radio-communications signals in accordance with any
of the frequency bands specified above.
• The ESV is usually designed for unattended operation.
• The ESV is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution
and/or exchange of information between users.
• The ESV is controlled and monitored by a Network Control Facility (NCF). The NCF is outside the scope of
the present document.
The present document applies to the ESV with its ancillary equipment and its various telecommunication ports, and
when operated within the boundary limits of the operational environmental profile declared by the applicant and when
installed as required by the applicant by declaration or in the user documentation.
The present document is intended to cover the provisions of Directive 2014/53/EU [7] (RE Directive) article 3.2, which
states that "… radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio
spectrum in order to avoid harmful interference".
The present document incorporates the technical limitations listed in annex 2 of ITU-R Resolution 902 (WRC-03) [i.1],
ECC Report (05)69 [i.2], and ECC Report (06)91 [i.3].
NOTE 2: According to ITU-R Resolution 902 [i.1], any transmission from ESVs within the 300 km minimum
distance of each country where the ESV transmit frequency band is used by the Fixed Service will be
subject to the prior agreement of the concerned administration(s), which may specify additional
operational requirements, or to the relevant ECC Decision.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Directive 2014/53/EU [7] may apply to equipment within the scope of the present
document.
NOTE 3: A list of such ENs is included on the web site http://www.newapproach.org/.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    English language
    sale 15% off
SIST
SIST EN 302 340 V1.1.1:2006(Main)
Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements under article 3.2 of the R&TTE directive
ETSI EN 302 340 V1.1.1 (2006-04)

The present document applies to Earth Stations located on board Vessels (ESVs) which have the following characteristics: The ESV is comprised of all the equipment, electrical and mechanical, from the antenna itself to the interface with other communications equipment on board (usually referred to as the terrestrial interface). The ESV transmits in the frequency range from 14,00 GHz to 14,50 GHz allocated to the Fixed Satellite Services (FSS) (earth-to-space). The ESV receives in one or more frequencies within the range from 10,70 GHz to 12,75 GHz in the bands allocated to the Fixed Satellite Services (FSS) (space-to-earth), depending on the ITU Region where the ESV is located. The ESV uses linear polarization. The ESV operates through a geostationary satellite at least 2° to 3° away from any other geostationary satellite operating in the same frequency band and covering the same area. NOTE 1: The satellite spacing is mainly equal to 3° in ITU Regions 1 and 3 and 2° in ITU Region 2. The ESV transmits at elevations greater or equal to the minimum elevation angle declared by the applicant. The ESV antenna diameter is not smaller than 0,6 m. NOTE 2: Operation within 125 km of non-CEPT countries with antenna diameter smaller than 1,2 m may be subject to specific agreement with concerned administrations as stated in ITU-R Resolution 902 (WRC-03). The ESV is designed for transmission and reception of radio-communications signals in accordance with any of the frequency bands specified above. The ESV is usually designed for unattended operation. The ESV is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution and/or exchange of information between users. The ESV is controlled and monitored by a Network Control Facility (NCF). The NCF is outside the scope of the present document. The present document applies to the ESV with its ancillary equipment and its various telecommunication ports, and when operated within the boundary limits of the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". The present document incorporates the technical limitations listed in annex 2 of ITU-R Resolution 902 (WRC-03). NOTE 3: According to ITU-R Resolution 902 (WRC-03), any transmission from ESVs within the 125 km minimum distance of each country where the ESV transmit frequency band is used by the Fixed Service will be subject to the prior agreement of the concerned administration(s) or to the relevant ECC Decision and may specify additional operational requirements. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Directive 1999/5/EC [1] (R&TTE Directive) may apply to equipment within the scope of the present document.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ETS 300 740 E1:2006(Main)
Satellite Earth Stations and Systems (SES); Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC) in the Maritime Mobile Satellite Service (MMSS), not intended for distress and safety communications
ETSI ETS 300 740 ed.1 (1997-04)

This European Telecommunication Standard (ETS) provides specifications for the standardization of the characteristics of Maritime Mobile Earth Stations (MMESs) not providing those distress and safety functions required by the International Maritime Organization (IMO) with both transmit and receive capabilities in order to limit interference to radio communications services. The geostationary satellite networks referred to in this ETS operate under the Maritime Mobile Satellite Service (MMSS). The MMESs operate as part of a geostationary satellite network providing Low Bit-Rate Data Communications (LBRDC). The MMESs could consist of a number of modules including a keyboard interface to the user.
The main specifications are contained in three categories related to:
- safety: to protect persons from potentially dangerous RF power densities;
- unwanted emissions: to protect terrestrial and satellite radio services from harmful interference;
- MMES control and monitoring: to specify a minimum set of Control and Monitoring Functions (CMF) to be implemented on each MMES in order to minimize the probability that they originate unwanted transmissions that may give rise to harmful interference to other systems.
Additionally to these specifications the satellite operator may require other specifications or different limits.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-3:2023(Main)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
EN ISO 3262-3:2023

This document specifies requirements and corresponding methods of test for blanc fixe.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day